Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These custom clips and pads let you mount Thule Evo Flush Rail or Edge Flush Rail feet on your vehicle with flush, factory side rails. Clips attach to a mounting bolt in the foot assembly and tighten together. Includes 4 clips and 4 pads.
Features:
Specs:
Secure, Clamp-On Installation
To complete installation, place the fully assembled rack on your flush rails and tighten the rack in place with the torque tool included with the feet. The inner and outer clips in each foot tighten with a single mounting bolt to ensure an even, secure grip on your rails. An audible click from the torque tool indicates the rack is secured properly.
Protection for Your Rails
The rubber-coated steel clips and molded rubber pads protect your side rails from scratches and abrasions. The pads easily slide onto the bottoms of each foot, and they're designed to fit the shape and contour of your vehicle's flush rails.
Average Customer Rating: 4.9 out of 5 stars (189 Customer Reviews)
These custom clips and pads let you mount Thule Evo Flush Rail or Edge Flush Rail feet on your vehicle with flush, factory side rails. Clips attach to a mounting bolt in the foot assembly and tighten together. Includes 4 clips and 4 pads.We love the product, but the Thule pictures only instructions can be a bit confusing
Product arrive quickly. Had no issues with using this kit with the Thule Evo Flush.
Perfect! Thanks once again e trailer.
Exactly what I needed!
Very pleased with order. Shipped fast, not damaged, all parts accounted for. Easy install, very sturdy, and attractive design. Slight wind noise but that was expected compared to not having a roof rack.
Originally ordered a Yakima system, but availability everywhere was virtually nil. Switched to Thule and ran into some of the same shortages with the supply chain, likely due to Covid. Took about a week to receive and it was the perfect part for my BMW X3.
Great roof cross bars for the Lexus RX450h ! Better and beefier than the OEM cross bars. Yes, these are more expensive (wish they weren't! Locks should be included in the base cost) They are solid and planted the XXL roof carrier with ease. Took a bit to center the roof carrier- so we could open the rear door without crashing into it. Only took a 3 mpg hit with the racks and carrier on the roof (@ +5 mph over speed limit on the highway) I really like the way they look on the vehicle. We're probably going to keep them up for snowboarding season. Keep in mind once they're initially installed- they're a snap to take down as well.I made a mark on the inside on the rails to make reinstalling easier.
I ordered the Thule WingBar Evo Crossbars - Aluminum - Silver - 50" with the Evo Flush Rail Feet for Thule Crossbars - Flush Side Rails and the Fit Kit for Thule Evo Flush Rail and Edge Flush Rail Roof Rack Feet for my 2020 Mazda CX9. I appreciated the product selector to make sure I was getting all the correct parts. I was happy with the products, but I did run into an issue where 1 of the rail feet had a defective bolt which required a replacement. I was very satisfied with etrailer's customer support, and how well they worked with me to get the part replaced quickly.
One year in, this fit kit and the whole system have worked very well on my Kia EV6.
I miss the simplicity, in terms of cost as well as installation and removal, of the old Thule rectangular-bar racks, but this system looks better, is quiet, won't sag, and seems more robust.
Worked as promised. Easy install. We use it for our Kuat bike rack. If you need it for your ID.4 (AWD) get it.
Easy to install, took less than 30 min.
Perfect fit on a Volvo V60 CC.
No issues with a "trunk" mounted bike carrier secured to the rear bar. Yakima Frontloader also fit perfectly.
I ordered a Thule rack, including the mounting feet and the cross bars. I then learned, less than a day and a half from our departure for a ski trip, the mounting feet needed a “kit” of hardware in order to function. I spoke with Justin at etrailer who confirmed the kit was in stock. Though it was mid-afternoon, Justin confirmed with etrailer Shipping the kit could go out for next day delivery. The next morning the kit arrived and I successfully mounted our rack system. Clearly my fault for not getting all the necessary components. Still, Justin solved my problem. “Customer Service” is alive and well at etrailer! Thanks, Justin!
Solid roof rack, but get help from etrailer to make sure you get the core feet.
After searching unsuccessfully for support in the retrofit of my legacy Thule rack to a new car, I was pleased by the excellent support from Bailey B. She was methodical in her query and verification of compatibility in my non-standard application. The rack
Perfect fit and easy installation. Highly recommend for a lower profile rack. Also allows sunroof to vent on 2016 Lexus RX350. Haven’t driven with them on yet so I don’t know how road noise is at this time.
I got my packages today and had it installed within the hour looks great very satisfied
As always, when I need parts or a new roof rack, I look to etrailer to supply my needs. Fair prices, vast inventory and speedy service.
Easy set up, great roof rack. One small problem with installing the rubber strips, piece would not lay flush..
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.