Availability of Trailer Hitch Receiver for 2018 Mazda MX-5 Miata (ND)

Question

Question:

I can’t find a tow hitch for my car, 2018 Mazda Miata MX5. ND

asked by: Ronald M

0

Expert Reply:

The Curt # C11435 is confirmed to fit your 2018 Mazda MX-5 Miata (ND). This is a Class I hitch with a 1-1/4" receiver. It has a maximum gross trailer weight of 2,000 lbs and tongue weight of 200 lbs. Make sure to consult your owner's manual for your vehicle towing/tongue weight capacity since it is likely the limiting factor. This features a bolt-on installation and a limited lifetime warranty.

expert reply by: Robin H

0

Answer 1

Yes, the Curt hitch part #C11435 is a confirmed fit for your 2016 Mazda MX-5 Miata and would have enough capacity for pulling a jetski trailer. It has a 2,000 lb capacity which would be more than enough. For trailer wiring you'd then need…

view full answer...

Answer 2

The Curt Class I Trailer Hitch Receiver #C11435 is confirmed to fit your 2016 Mazda MX-5 Miata. This trailer hitch features a 1-1/4 inch hitch receiver that will work well with the Kuat Beta 2-Bike Rack #B202-114. This is a great, light-weight bike…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver #C11435 referenced in your question is a Class I trailer hitch and is confirmed to fit your 2016 Mazda MX-5 Miata. The hitch will always be somewhat visible when looking at your vehicle from behind, whether or not it…

view full answer...

Answer 4

The Swagman XTC-2 2-Bike Platform Rack part #S64670 weighs right around 33 lbs. This will actually be one of the lightest platform style bike racks we offer. It has a 3" raised shank which will help with ground clearance and it can be folded…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...