Recommended Front Mud Flaps for a 2022 Ford Expedition.

Question

Question:

2022 Ford Expedition XL STX, Has anyone tried the 120088 on my vehicle yet? Looks like the 110088 will fit my vehicle. THANKS

asked by: Michael W

0

Expert Reply:

You are correct the Front Pair WeatherTech Mud Flaps item # WT110088 are confirmed to fit your 2022 Ford Expedition. As far as rear ones go, I reached out to WeatherTech and confirmed that the item # WT120088 do not fit the 2022 Expedition.

expert reply by: Jerred H

0

Answer 1

I spoke with my contact at Weathertech and they informed me that the front mud flaps part #WT120088 that you referenced do fit your 2018 Ford Expedition that has power running boards. For a set of rear mud flaps you'd need #WT120094. If you had a…

view full answer...

Answer 2

I spoke with my contact at Curt who said he was not aware of any brake actuator problems related to use with their weight distribution systems that utilize steel-on-steel friction, #C17500. However, you may want to consider a system that does not use…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 10

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 11

Yes, you do. The wiring that comes with the Blue Ox Accessory Kit item #BX88308 only controls your towed vehicle's lights. You will need to add the Roadmaster Battery Charge Line Kit item #RM-156-25.

view full answer...

Answer 12

Currently the InfiniteRule Trailer Coupler Lock #IR58FR is only offered keyed unique. For a keyed alike option you will want to refer to one of our etrailer Locks #e98886 or #e98889 and select keyed alike from the drop down box when placing your…

view full answer...