To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.
Features:
Precision fit, durable components and ease of installation make WeatherTech NoDrills your first choice in mud flaps. Installing mud flaps has never been this painless. Patent-pending QuickTurn stainless steel fasteners makes installation quick and easy - no drilling required.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2018 Ford Expedition, we're going to be taking a look at and showing you how to install the Weathertech No-Drill Easy-Install Mud Flaps for the front. That's going to be part number WT110088. These are also available for the rear using part number WT120088. Here's what our Weathertech mud flaps look like once we have them installed. Now, these are going to keep all that dirt, debris and everything else from coming back onto the fender, the door and our running boards. Our mud flaps are going to help keep those rock chips and rocks from coming and scratching our paint as well as having the water streaking on there whenever it's wet outside.Our mud flaps are going to be constructed out of a thermoplastic resin, so they're going to be nice and strong, and they're not going to fade over time.
These are going to be contoured digitally, so they're going to fit perfectly around our Expedition even with our running boards right here. Our mud flaps are going to have all stainless steel hardware and a quick turn fastener for easy installation. Let's show you how to do that now. To begin our installation, we're going to want to turn our wheel all the way to one side. We're on the right side here, so we're going to turn the wheel all the way to the right.
At the bottom of the wheel well opening, we're going to have two pushpin fasteners that we're going to have to remove. You can get a trim panel tool or a flathead screwdriver, and there's going to be a small notch. You're going to want to come in that notch and pop out the center of the pushpin. Then we can come behind the outer part, and pull the rest of it out. These are not going to be getting reinstalled.Then you want to come to the bottom of your wheel well liner, and you're going to want to pop it out, so we can expose that metal flange where those two pushpins we're going in.
Then we'll grab one of the u-nuts, and on the bottom here it's going to have an opening. You're going to want to slide that over the metal flange so where the flat part is facing towards the liner. You want to line up the hole so it goes in line with the factory hole, and then we can put our liner back in and make sure it's all tucked away. Then you're going to want to grab your mud flap, and they are labeled, RH for right hand. If we come to the top of the quick turn fastener, it's going to have a lock symbol and an unlock.
We're going to make sure that it's unlocked when we put it in place.We'll line up those two holes pretty close to where they're going to line up on the vehicle. Then you're going to want to push in a little bit so it sits pretty flush against the car. Then we're going to take the included Allen key, and we're going to tighten up that screw. When we do, it's going to turn over to the locked position. We want to continue tightening it up until it's nice and snug. That will hold our mud flap in place while we can get the rest of our hardware in. On the bottom two we're going to take a screw and a flat washer, and we'll get it started by hand, then we can come back with either a Phillips screwdriver or a bit driver and tighten them up. With this one on, we can put the other side on the same way. That will finish up your look at the Weathertech No-Drill Easy-Install Mud Flaps for the front, part number WT110088 on our 2018 Ford Expedition.
Average Customer Rating: 4.8 out of 5 stars (1380 Customer Reviews)
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.
I had these rear mudflaps installed about 1 year ago along with their counterparts for the front tire wells (part number WT10088) on my 2018 Ford Expedition Max Platinum. 1 year later they still look as good as new. They are solidly attached and do not bend back and forth. They appear to provide good protection for the lower front doors and rear quarter panels. One word of caution: before ordering, check with the pros at etrailer to make sure you order the right version(s) for your vehicle. Parts number WT120088 and WT 110088 DO fit the Ford Expedition with the power running boards standard on Platinum models and optional on XLT models. There are other Weathertech mudflaps that DO NOT work with power running boards. As far as appearance goes, my Expedition is the one featured in the video on the etrailer page featuring these products.
I received 5 star customer service from etrailerTeam.
The installation went pretty smooth.
Front and back didn’t fit that tight maybe were disformed loved the other sets before
As advertised. Easy to install.
This product is nicely done, and care was taken in shipping.
Not only do we often buy products from them, but their customer service is exceptional. Always get a response to every email. Impressive.
Our client will be very happy. These are nice.
Perfect fit. Easy install. Arrived in days of order...
Easy to install!
Great fit. Like they were designed by F ord
Just like the description says...easy install, no drill, digital fit. Looks like they came with the truck. Highly recommend.
Did not fit well on the 2022 Dodge Ram 3500. The rear flaps did not quite fit the OEM fender flares on the vehicle. Too tight - not enough clearance to sit nicely against the flares. There was also no hole for the trim fastener so had to drill a 1/4" hole for little plastic fastener - not a big deal. Hoping the front ones fit better, but they were worse. Same story - the "digital fit" flaps did not fit the OEM fender flares. Tried a heat gun to hopefully warm the flap and maybe get them to fit together better, but couldn't quite get it. I'll need to get some longer fasteners, otherwise one bolt and the little plastic tab are all thats holding it on. Maybe if the weather warms a bit...? Def not as advertised.
holes did not line up with pre existing holes on car
for installation. Very hard
to install. will NOT buy weathertec again
Fantastic product. Very easy installation. High quality. Very fast delivery! Etrailer is the best as always!
Delivery was quick. The mudflaps were very easy to install it took me about 15 minutes. Extremely happy with the way they look and no more rocks and debris flying up from my tires. Definitely recommend.
Look great! Look OEM. Wish all the hardware was black. And in the front the two screws you pull out both sides, trash go get something a little longer and more girth. etrailer was great the arrived earlier then expected.
These mud flaps are great! Good Instructions and install went quickly. They look really good and should perform well, protecting the rocker panels and the side steps from mud and stones. Very pricey but good quality. Front Pair.
Took a little effort to get it to match up with the plastic wheel well fender flares but once I did I have not had any issues. Looks somewhat subtle but is pretty effective at stopping thrown debris onto the paint.
For someone who is "old school" and reluctant to install plastic onto a machine, I'm impressed with the ease of installation and durability so far. I've put about 7500 miles on them without an issue. And thanks to Etrailer for carrying great products and providing great info to consumers. You folks have a great Business model!
Great service item was shipped and received quickly. Mud flaps were easy to install.
Great product, easy to install, I didn't find the instructions, but was easy to figure out. I would recommend this product
I was apprehensive about buying these as the weather tech company said they would not fit. My vehicle has power running boards and 22” wheels..I researched forums and took a chance. They fit…no problem. See attached photos and video.
Thanks
This is a good investment. First, etrailer is a great place to get what you need for supplies! The weathertech mud flaps are a great addition to a raised F-250 with larger tires that pulls. This will provide the rest of the protection I need as well as cut down on debris that the tires throw up at other cars/trucks. Very easy to install and if I want to remove them then I have all the pieces necessary except for the push grommets which I can get anywhere. I think I will leave them on for a while....not bad looking either.
Do you have a question about this Mud Flap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.