Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.
Features:
Precision fit, durable components and ease of installation make WeatherTech NoDrills your first choice in mud flaps. Installing mud flaps has never been this painless. Patent-pending QuickTurn stainless steel fasteners makes installation quick and easy - no drilling required.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2018 Ford Expedition, we're gonna be taking a look at and showing you how to install the Weathertech No Drill Easy Install Mud Flaps for the rear, part number WT120088.Now, they're also available for the front using part number WT110088.So, here's what our mud flaps are gonna look like once we have them installed on our Expedition. These are gonna keep all that road debris from coming back and getting on the back bumper and protect our paint from any kind of rock, chips or scratches. And, if we're towing a trailer, it's gonna keep all that debris off the trailer, as well.Our mud flaps are gonna be digitally contoured, so they're gonna fit all the body lines perfectly. And the mud flaps are gonna be made out of a thermoplastic resin so they're gonna hold up for a long time.Our mud flaps are not gonna require any kind of drilling. They're gonna use all factory holes, as well as stainless steel hardware, so, we're not gonna have to worry about any rust or corrosion.So, now that we've seen what they look like, let's show you how to get 'em installed.To begin our installation, we're gonna come to the rear wheel, and along the edge of the wheel well here, we're gonna have four of these plastic fasteners. You'll want to use the included bit that comes in the kit, and you can use the socket or a bit driver to pull out the center, but I'm threading it, and when you're unthreading it, you want to be careful, you don't want to push too hard, because that center will go back in, but, you want to unthread that screw.
We can pull it out, and then we can pull out the rest of the push pin. And we'll repeat that for all four along the edge here.Once you remove the last one, we're gonna pull the wheel well liner back so we can expose all the holes that those fasteners we're in.So, if we grab our kit, we're gonna have these little U-nuts, and they're gonna be open at the bottom. We're gonna want to slide these over the plastic so they go over the factory holes. However, we're only going to be doing it on the top one, one down from that, and the very bottom one.So, you take your clip and you get it pretty close to lined up, and we're gonna want to slide it onto the plastic so the hole lines up with the factory hole. Now, the top one and the bottom one can be a little bit of a tight fit, just because we have our rear bumper in the way, but if you just pull away a little bit, we can get the clip in there and started, and we'll just squeeze it until it slides all the way on.And, the one on the top, you want to make sure you get it onto the black inner plastic and not on that white piece.With all those clips in place, we'll put our wheel wall liner back.So, we're on the right side, so, we'll grab the right-hand one.
We're gonna line up the holes, and we'll come up to that second one from the bottom, and we're gonna take the plastic push pin fastener that's included in the kit and we'll put it in, and that'll hold our mud flap in place while we get the rest of the hardware in.So, we'll take one of the included screws and a flat washer, and we're gonna get these started by hand in the remaining locations. And then we can come back with the bit that's included in the kit, and we can tighten them all up.With this mud flap done, we're gonna repeat the same process on the other side.That'll finish up your look at the Weathertech No Drill Easy Install Mud Flaps for the rear, part number WT120088.
Average Customer Rating: 4.8 out of 5 stars (1383 Customer Reviews)
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.This product is nicely done, and care was taken in shipping.
Not only do we often buy products from them, but their customer service is exceptional. Always get a response to every email. Impressive.
Our client will be very happy. These are nice.
Perfect fit. Easy install. Arrived in days of order...
Just like the description says...easy install, no drill, digital fit. Looks like they came with the truck. Highly recommend.
Did not fit well on the 2022 Dodge Ram 3500. The rear flaps did not quite fit the OEM fender flares on the vehicle. Too tight - not enough clearance to sit nicely against the flares. There was also no hole for the trim fastener so had to drill a 1/4" hole for little plastic fastener - not a big deal. Hoping the front ones fit better, but they were worse. Same story - the "digital fit" flaps did not fit the OEM fender flares. Tried a heat gun to hopefully warm the flap and maybe get them to fit together better, but couldn't quite get it. I'll need to get some longer fasteners, otherwise one bolt and the little plastic tab are all thats holding it on. Maybe if the weather warms a bit...? Def not as advertised.
Look great! Look OEM. Wish all the hardware was black. And in the front the two screws you pull out both sides, trash go get something a little longer and more girth. etrailer was great the arrived earlier then expected.
Fantastic product. Very easy installation. High quality. Very fast delivery! Etrailer is the best as always!
holes did not line up with pre existing holes on car
for installation. Very hard
to install. will NOT buy weathertec again
Delivery was quick. The mudflaps were very easy to install it took me about 15 minutes. Extremely happy with the way they look and no more rocks and debris flying up from my tires. Definitely recommend.
These mud flaps are great! Good Instructions and install went quickly. They look really good and should perform well, protecting the rocker panels and the side steps from mud and stones. Very pricey but good quality. Front Pair.
Took a little effort to get it to match up with the plastic wheel well fender flares but once I did I have not had any issues. Looks somewhat subtle but is pretty effective at stopping thrown debris onto the paint.
Great service item was shipped and received quickly. Mud flaps were easy to install.
For someone who is "old school" and reluctant to install plastic onto a machine, I'm impressed with the ease of installation and durability so far. I've put about 7500 miles on them without an issue. And thanks to Etrailer for carrying great products and providing great info to consumers. You folks have a great Business model!
I was apprehensive about buying these as the weather tech company said they would not fit. My vehicle has power running boards and 22” wheels..I researched forums and took a chance. They fit…no problem. See attached photos and video.
Thanks
Great product, easy to install, I didn't find the instructions, but was easy to figure out. I would recommend this product
This is a good investment. First, etrailer is a great place to get what you need for supplies! The weathertech mud flaps are a great addition to a raised F-250 with larger tires that pulls. This will provide the rest of the protection I need as well as cut down on debris that the tires throw up at other cars/trucks. Very easy to install and if I want to remove them then I have all the pieces necessary except for the push grommets which I can get anywhere. I think I will leave them on for a while....not bad looking either.
I ordered Weather Tech mud flaps for my GMC Sierra 1500. The front flaps were easy to install by using existing fasteners installed on the truck by GMC. The rear flaps were slightly more challenging requiring the placement of clamps (integral to the flaps) on the rear fender. The entire installation of all flaps required about 45 minutes. they look great and they will protect my fenders from being damaged by road debris.
East install on 2023 Thor Compass 23te Motorhome. Fit perfectly. Place some tape on a open end wrench to hole the nut on and you are good to go.
Weather tech always fits and looks good
Good quality. Arrived quickly
Easy to install.
I ordered a set of weathertech no drill mud flaps for my new 2022 Colorado and they fit great and easy to install. Well after a couple of weeks I put on GM flares so I had to order another set for flares. Same thing excellent fit and easy install. Quick shipping and good service.
Fit my 2020 Honda Ridgeline perfect! Easy to install with easy to follow instructions. Match oem black plastic great. Really complete the look of truck. Very happy customer.
Seems like a solid product. Made in the USA. The instructions were a bit off. So I jumped on the etrailer YouTube account, found the install video. Issue solved. I will say I'm more impressed with etrailer than weathertech. However, nice fit and finish. I would recommend this product.
Good service and product from etrailer, and the mud flaps fit was exact, no issues and easy to install.
Do you have a question about this Mud Flap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.