Expert Answers about Mud Flaps
- Dimensions of the Correct WeatherTech Rear Mud Flaps for a 2012 Ford F-350 Dually
- The custom fit mud flaps that will work on the rear of your 2012 Ford F-350 Dually will be the WeatherTech Rear Mud Flaps, part # WT120030. These mud flaps are the custom fit for the Dually and will work with or without fender flares.
I went out to the warehouse and measured the # WT120030 mud flaps, see the attached video I made that will show the actual mud flap and its measurements. The width of the mud flap is 19-1/2 inches and the length of the the mud flap is 21 inches. I also included...
view full answer... - Is The Buyers Products Truck Mud Flaps # 337B40LXP A Quantity Of Two Mud Flaps
- Yes, the Truck Mud Flaps # 337B40LXP is a quantity of two mud flaps.
view full answer... - What Mud Flaps Are The Easiest To Install On A 2024 Toyota Tundra
- Out of all of the mud flaps that we have for the 2024 Toyota Tundra, the WeatherTech Mud Flaps # WT63XQ will definitely be the easiest to install. WeatherTech uses a unique quick-turn fastener on all of their mud flaps. The quick turn fasteners allow you to securely attach the mud flaps without any need for drilling. It is certainly not a stretch to say that the WeatherTech mud flaps can be installed in a matter of minutes.
Many other brands of mud flaps, like the Rockstar Splash Guard...
view full answer... - Front and Rear Mud Flaps for a Ford F-150 STX
- We do offer a front pair of mud flaps that are compatible with the rear mud flaps that you viewed on our website. The WeatherTech Mud Flaps, part # WT110003, are the front pair of our rear WeatherTech Mud Flaps, part # WT120003. These mud flaps are an excellent choice for your Ford F-150 because they do not require any drilling or tire removal for installation. I have listed the front pair mud flaps on the page for you. These mud flaps fit Ford F-150 models between 2004 and 2011. I have...
view full answer... - What Rear Mud Flaps are Best for My 2022 Ram 3500 Dually?
- For great mud flaps that will fit your 2022 Ram 3500 dually, I recommend one of the following sets:
- Mud Skins Dually Mud Flaps - Hex Shield - Carbon Black # P93VR
- Mud Skins Dually Mud Flaps - Hex Shield - Polished Stainless Steel # P36VR
- Mud Skins Dually Mud Flaps - Hex Shield - Brushed Stainless Steel # P42VR
All three of these sets of rear mud flaps will fit dually models with or without factory add-on fender flares. The hex shield pattern adds a modern look without reducing...
view full answer... - Front And Rear Mud Flaps For 2022 Ram 3500 Dually
- We do have one option for both front and rear mud flaps for your 2022 Ram 3500, which are heavy-duty flaps from Putco:
- Front: Mud Skins Mud Flaps # P28VR
- Rear: Mud Skins Dually Mud Flaps # P93VR
These are as strong and durable as mud flaps can get, made from HDPE plastic, which is a high-density thermoplastic that can withstand temperatures from -140 to 180F. They have an "anti-sail" design so they have added weight to keep them in place as you are driving to keep more of your Ram...
view full answer... - Mud-Flaps For A 2014 Cadillac Escalade Without Add-On Fender Flares
- Though The WeatherTech Mud Flaps # WT110038-120037 are not confirmed to fit your 2014 Cadillac Escalade without add-on fender flares we do have the correct mud flaps for you! The mud flaps you ordered are for a 2015-2019 Cadillac Escalade.
The WeatherTech Mud Flaps # WT110008-120012 are confirmed to fit your 2014 Cadillac Escalade. The mud flaps have an easy install with no drilling or tire removal.
view full answer... - How Do The Buyers Products Mud Flaps Mount on a 2015 Ford F-250 Super Duty
- The Buyers Products Mud Flaps # 337B117518PPB will require some drilling into the mud flaps to create the holes that can be used to mount them on the available holes of your 2015 Ford F-250 Super Duty. Although there will be holes available directly behind the wheels to install these mud flaps, there is not installation hardware included with these flaps so you will need to source that locally. These mud flaps will also need to be trimmed with a utility knife to match the rear of the wheel...
view full answer... - Are WeatherTech Rear Mud Flaps Available For a 2007 Chevrolet Silverado New Body
- The rear mud flaps for the 2007 Chevrolet Silverado New Body would be the WeatherTech Mud Flaps - Rear Pair, part # WT120010. The rear mud flaps will not work on Dually vehicles.
If you need the front and the rear mud flaps together you can order the WeatherTech Mud Flap 4-Piece Set, part # WT110010-120010.
These mud flaps will fit vehicles with factory running boards, but will NOT fit vehicles with fender flares.
view full answer... - Need Front Mud Flaps To Fit A 2006 Toyota Tundra With Fender Flares
- I called DeeZee and they have a universal mud flap DeeZee Universal-Fit Plastic Mud Flaps, # DZ17939 that will fit your 2006 Toyota Tundra with fender flares. They said the custom fit mud flaps they have for the Toyota Tundra will not fit with fender flares.
WeatherTech and Highland do not have any mud flaps for the Toyota Tundra.
view full answer... - Replacement Mud Flap for the Rock Tamers Adjustable Mud Flap
- Yes, you can get the individual mud flap # ERTO22 and it will fit the left or right side on the Rock Tammers adjustable mud flap # ERT00108.
view full answer... - Are WeatherTech Mud Flaps # WT120045 Larger Than OEM Mud Flaps on 2015 Toyota Tundra
- I checked with my technical contact at WeatherTech for the dimensions of their mud flaps # WT120045 that fit your 2015 Toyota Tundra. Exact dimensions were not available from them but they advised that all of their mud flaps for your truck measure between 17- and 18-inches tall x 10- to 11-inches wide. These mud flaps fit trucks without add-on fender flares.
If you DO have add-on fender flares and have a 2-inch hitch OR if you just want really large mud flaps then a better choice in a...
view full answer... - How Long And Wide Are The Weather Tech Mud Flaps, Part # WT110035-120035
- The WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Set, part # WT110035-120035, has the following dimensions.
The front mud flap measures 13-5/8" X 10-1/4" (H X W).
The rear mud flap measures 17-5/8" X 11-5/16" (H X W).
I measured the height from the bottom of the mud flap to the topmost part of the mud flap, so that is how far each of these mud flaps will hang down from the top of the mud flap. I have included an installation video link as well.
view full answer... - Will the WeatherTech Mud Flaps Fit on a 2012 Ford F-250 Lariat 4x4 With Factory Fender Molding
- We do have mud flaps that will fit on your 2012 Ford F-250 Lariat 4X4 with factory fender moldings, but the WeatherTech Mud Flaps, # WT110020, are designed to fit trucks without fender moldings.
Instead, I would recommend looking at the WeatherTech Front Mud Flaps, # WT110031. We also offer the Rear Mud Flaps, # WT120031. These mud flaps were designed to fit trucks that have the factory add-on fender moldings. We also offer the front and rear mud flaps in a set which is part # WT110031-120031....
view full answer... - Replacement Mud Flap for Roadmaster RoadWing Mud Flap System
- Yes, you can get replacement mud flaps for your RoadMaster RoadWing Removable Mud Flap System # RM-4400. The Roadmaster Roadwing Replacement Mud Flap # 200345-00 is what you are looking for. This is a single mud flap so you will need to order 2 to replace both.
view full answer... - What Does the Vertical Adjustment Mean on the Rock Tamers Mud Flaps # ERT00108
- The vertical adjustment on the Rock Tamers Mud Flaps, part # ERT00108, means that the bolts that connect the pivoting arms to the center hub can be loosened to raise or lower the height of the mud flaps. It will adjust the up and down (vertical) position of the mud flaps for proper ground clearance.
The horizontal adjustment is when the bolts at the top of the pivoting arms can be loosened and the support rods can be adjusted for different widths of vehicles. This will adjust the side...
view full answer... - Will the Access Rockstar XL Custom Mud Flaps # A10100221 Set Off Proximity Sensors
- Since you will be adding an obstacle next to the rear sensors on your 2016 Ford F-250 Super Duty the Access Rockstar XL Custom Mud Flaps # A10100221 could very likely set off the proximity sensors.
These mud flaps weigh about 45 lbs and the Rock Tamers Heavy-Duty, Adjustable Mud Flap System # ERT00108 weighs slightly over 30 lbs.
To ensure that your rear sensors are not set off by your mud flaps I recommend installing permanent mud flaps. We have the WeatherTech Mud Flaps # WT120031 if...
view full answer... - Availability of Universal Fit Mud Flaps for 2013 Honda Pilot
- I spoke with my contact at Husky Liners and she said Husky does not make custom fit mud flaps for the 2013 Honda Pilot, and have not test fitted universal fit mud flaps with this vehicle. However she said the universal fit Husky Liners Mud Flaps # HL56261 might work with your vehicle as long as you can find a place to drill bolt holes on the edge of the fender well, and the mud flaps sit level and line up well with the contours of the fender well.
view full answer... - Availability of WeatherTech Mud Flaps for 2005 Chevrolet Suburban With Running Boards
- I spoke with my contact at WeatherTech and they said if your 2005 Chevrolet Suburban has OEM factory running boards the WeatherTech Mud Flaps, part # WT110005, will be the correct front mud flaps to use. The running boards will not have to be removed. They do not have any rear mud flaps that will work for your Suburban with OEM factory running boards. If the running boards are aftermarket, they cannot guarantee that any of the WeatherTech mud flaps will fit.
The WeatherTech Mud Flaps,...
view full answer... - Mud Flaps Fit for a 2005 Chevrolet Trailblazer with Factory Running Boards
- I spoke with my contact at Husky Liners and verified that the Front Mud Flaps, # HL56281, will fit on your 2005 Chevrolet Trailblazer with the factory running boards. For the rear set, you will want part # HL57281.
Drilling will be required to install these mud flaps on your vehicle. The installation calls for a 1/8 inch drill bit and requires 3 holes per mud flap. To make it easier to mark and drill the holes, you can use the mud flaps as a template to mark the locations of the holes.
view full answer...
Go To Results