How to Pick Out Bearings for a Dexter P-21 SLR Axle
Question:
I recently purchased a flat bed trailer with 2 Dexter p-21 model slr axles under it. All 4 of the hub assemblies bearings are shot and need to be replaced. Is there any other info you will need to be able to tell me what I need go them? Thanks,
asked by: Duane L
Expert Reply:
We checked with Dexter and P-21 just indicates where the axle was made. With the serial number we could track down more info on your axle.
However, in the mean time you could pretty easily get the bearing numbers off of your current bearings and then check out the link I attached to see what each bearing kit contains to see which would work.
There are two different bearing kits that would MOST LIKELY work for you.
If you need a seal with a 2-1/8 inch inner diameter you would need the part # BK3-210. If you need a 2-1/4 inch seal you would need the part # BK3-200. The bearings of this kit are 14125A/ 25580. If the bearings on your trailer now have those numbers stamped on them either kit would have the right bearings.
You will need to remove the hub and measure the diameter of the spindle where the seal rides to see which kit you would need if you can't get the bearing numbers.
Products Referenced in This Question
Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Replacement Trailer Hub Bearing - LM67048
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Q&A: Tips for How to Identify a Trailer Axle
- Search Results: triple axle hanger kit
- Shop: Replacement Race for LM67048 Bearing
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 84556UC3 Review
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Video: etrailer Trailer Bearings Races Seals Caps - Seals - 58846 Review
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5
- Shop: Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: 2-3/8" Round Trailer U-Bolts (Qty 2)
- Search Results: 8~247
- Search Results: 8~249
- Search Results: 84546uc3~ez
- Search Results: brakes
- Search Results: brake
- Search Results: dexter wheel bearings
- Q&A: Replacement Electric Brakes for Dexter PR-FF SEC-FF 5.2KPR-GGSEC-GG 12X2XQ 36-89
- Article: Most Popular Wheel Bearings
- Q&A: Troubleshooting Trailer Brake Assembly that Locks Up When Spun Forward
- Q&A: How Can I Identify an Axle Without a Sticker?
- Q&A: What is the Hanger Spacing on the 6-Leaf Slipper Spring # e46SR?
- Q&A: Replacement for Transcom 21334TC and 2133TB
- Video: Review of ABS Fasteners Trailer Door Hinges - Roller Ramp Door Greasable Hinge Pin - ABS87FR
- Video: TruRyde E-Z Lube Grease Caps Plug Review
- Video: Review of TruRyde Trailer Bearings Races Seals Caps - Seals - RG06-070
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - AP233 Review
- Article: Trailer Tire Sizing
- Video: Review of Lippert Components Trailer Axle Parts - Oil Cap Kit - LC693935
on Trailer Bearings Races Seals Caps
