Reese M5 Series 5th Wheel Trailer Hitch for Use w/ 2020 and Newer Chevy Factory Puck System

Question

Question:

Hi, I have a 27000 reese for a 2016 gmc 3500 with rail system. I bought a 2022 chevy 3500 i neeed to buy legs for oem puck system, which legs do i use for 27000? Rp86FR or RP58FR? or something different? Also will the center section from my 2016 bolt up to the new legs. Thanks

asked by: Paul

0

Expert Reply:

To replace the legs on your Reese M5 5th Wheel Trailer Hitch item # RP30895 so they fit the 2022 Chevy Silverado 3500's pucks you will need item # RP86FR. These are the Replacement Legs for the Reese M5 5th Wheel Trailer Hitch that allow you to use your center section and head on the newer pattern GM puck system they introduced in 2020.

expert reply by: Jerred H

0

Answer 1

This is easily solvable; all you need to do for your 2021 GMC Sierra 3500 is add an adapter: - 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera #FR87PR

view full answer...

Answer 2

For the Furrion Vision S side camera/marker light kit #FCE48TASL the brown wire goes to running light circuit for the light to come one, the black goes to ground, and the red is your trigger wire for the camera to turn on. This allows you to decide…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...