B and W Patriot 5th Wheel Trailer Hitch Installation - 2015 Chevrolet Silverado 3500 Video

The B&W Patriot 5th Wheel Trailer Hitch #BWRVK3255 fits industry-standard fifth wheel rails so to mount it to a 2019 Ford F-350 with the OEM puck system all you need is the Reese Elite Series Underbed Rail Adapter for Standard 5th Wheel…

You are definitely correct that both the B&W Companion #BWRVK3305 and the Reese M5 #RP30922 are fantastic 5th wheel hitches that will work well on your 2019 Ford F-350 but I do recommend going with the B&W Companion #BWRVK3305. The…

I have the current manual of the B and W Patriot hitch part #BWRVK3200 pulled up and it states that pivoting pin boxes like the Sidewinders, Reese Revolutions, and Lippert Turning Points can be used on page 4. I am not sure why you found that but the…

The Curt #C16120 and Lil Rocker RBW were both designed to fit industry standard base rails. If your current RBW rails are industry standard, then the Curt Q16 #C16120 will fit the rails you have installed in your truck bed that a RBW Lil Rocker was…

To determine if a 2009 Chevrolet Silverado 1500 with a 5.3L V8 can tow your 2002 Coachmen travel trailer, you will need to find the towing capacity of the truck and weight of your trailer when it is loaded and ready to tow. I did some research on the…

The B&W Companion OEM 5th Wheel Trailer Hitch #BWRVK3700 is perfectly compatible with cushioned pin boxes like your MORryde RP072-1621HD, so the clunking you're experiencing isn't related to the two components being incompatible. With…

I have attached the complete installation instructions for the B&W Patriot 5th Wheel Trailer Hitch w/ Slider #BWRVK3270 for you to check out. The instructions include detailed steps for the installation and assembly process for the hitch upon…

The Patriot Slider part #BWRVK3270 might be a bit more noisy than the Companion slider part #BWRVK3400 due to the increased number of mounting points, 4 at the corners vs. 1 in the center. Probably not that noticeable and certainly not something…

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

The B and W Patriot Hitches like part #BWRVK3200 are designed to fit industry standard fifth wheel rails. If the Pullrite hitch you had was designed to fit the industry standard rails then this hitch would fit the rails as well. I attached a picture…

My contact at B and W has informed me that the Patriot 5th Wheel is compatible with Sidewinder pin boxes. He also tells me that the wedge on the underside of the Reese Revolution pin box (both the universal and hitch specific wedges) are compatible…

Your 4 inch tall gooseneck hitch ball is 100 percent compatible with the gooseneck adapter you asked about from Demco, which is the following part: - Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter #DM8550045 This adapter will fit hitch…