Tandem Axle Replacement Fender For a Boat Trailer With Fenders that are 65.25" X 18" X 9.25"

Question

Question:

Hi, I am looking for one galvanized fender for my dual axle boat trailer, but I dont see the dimension. The current fender is measured 65.25 long, 18 tall, and 9.25 wide. The tires are 75R15. Is this something you carry?

asked by: David E

0

Expert Reply:

The Tandem Axle Teardrop Trailer Fenders # HP94VR are going to be the closest in size to the ones you currently have. These fenders are 65" long x 9" wide x 15" tall. As these are not coated you can take them to have them galvanized at a local facility or you can choose to prime and paint them for corrosion resistance.

expert reply by: Bud M

0

Answer 1

It sounds like you are looking for the EZ-LOADER Gray Plastic Fender for 13" Tires, w/Cutout part 5291132 and 5291131. These are made for 13" tires and have a marker light cutout. The closest thing I have is the CE Smith Single Axle Trailer…

view full answer...

Answer 2

You are correct in your understanding. Some people interchange the word wheel with rim, but they are the same thing and then of course you have tires. Wheels are usually rated for weights as are tires, so combinations that are made on our site will…

view full answer...

Answer 3

For a 14" trailer wheel you're most likely looking at a lug nut that threads onto 1/2"-20 lug bolts such as the Lionshead #LHLR103. With that being said this is going to be more dependent on the hub than the wheel itself so I definitely…

view full answer...

Answer 4

The recommended lug nut torque for Loadstar ST215/75D14 Bias Trailer Tire with 14 Inch Galvanized Wheel, #AM3S560, is going to depend on your lug nut size. I have attached a chart which includes the following torque specs: 7/16 inch lug nut, 55-65…

view full answer...

Answer 5

The correct Trailer Valet for an Airstream Caravel is the Trailer Valet XL Trailer Dolly with Chain Drive part #TVXL25. In regards to being used on a sloping driveway, this is the response from Trailer Valet. "Each Trailer Valet model can handle…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 9

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 10

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

Tandem Axle Replacement Fender For a Boat Trailer With Fenders that are 65.25" X 18" X 9.25"

Product Page this Question was Asked From

Continue Researching