Identifying Wire Functions on Tekonsha T-One Vehicle Wiring Harness

Question

Question:

Which wires are right turn, left turn, tail and brake?

asked by: Justin

0

Expert Reply:

The wires on the T-One Vehicle Wiring Harness # 118746 use the standard color code. The general standard for a 4-way plug is as follows:

-Green: Right turn/brake light
-Yellow: Left turn/brake light
-Brown: Tail/running lights
-White: Ground wire

This wiring harness fits the 2017-2021 Mazda CX-5.

expert reply by: Robin H

0

4-Way Wiring Color Code.
(click to enlarge)

Answer 1

For the installation of the Draw-Tite Trailer Hitch, part #76138 the muffler is very easy to remove. You just remove the two fasteners at the rear of the muffler and the 2 fasteners on the exhaust pipe going into the muffler and you can get the…

view full answer...

Answer 2

You really do need to run the power wire of the Tekonsha trailer wiring kit that fits your 2021 Mazda CX-5 #118746 to the vehicle battery as this ensures that in the event of a short your vehicle wiring would not get damaged since it bypasses all of…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Identifying Wire Functions on Tekonsha T-One Vehicle Wiring Harness

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching