Correct Lift Kit for a Wells Cargo Trailer with a Dexter P-15 3,500 lb. Axle

Question

Question:

I have a Wells Cargo trailer with a single axle. The axle is a Dexter P-15 Model SLR, S/N 07766355. What are the lift kits could be installed on it?

asked by: Michael H

0

Expert Reply:

I contacted the manufacturer with the information you provided about your axle. They were able to confirm that you have a Dexter #10 Torflex axle on your Wells Cargo Trailer.

The correct lift kit for a Dexter #10 Torflex axle is the Torflex Lift Kit # K71-707-01.

expert reply by: Scott S

0

Answer 1

We offer four different axle lift kits for the Dexter Torflex axles. The difference between these kits is based on the weight capacity of the axle or tandem axles. There will be a tag on the axle shaft that will have the information needed to…

view full answer...

Answer 2

We have some lift kit options for torsion axle setups but the fits are very specific. So I will need you to get me the brand and capacity as well as any other info you can get on the axle from the label that's on it and I'll be able to let…

view full answer...

Answer 3

Thanks for the photos! Based on that you do not have 3 inch high-profile brackets on your #10 Dexter Torflex axles, so yes, you can absolutely use the Dexter lift kit on your 2019 Taxa Mantis: - Torflex Lift Kit - Single Axle - 2-5/8" Lift…

view full answer...

Answer 4

You can use two 12V batteries to power the Go Power Inverter #34275013 but that all depends on what size 12V batteries you plan on using what "short periods of use" means. I reached out to my contact at Go Power and he said that if you are…

view full answer...

Answer 5

There are a couple of things that you can do to get more ground clearance for your new trailer. First, if the leaf spring stack is attached under the axle then you could use an over/under conversion kit. If the trailer has a 2-3/8 inch diameter round…

view full answer...

Answer 6

The cargo mats are made specifically for the cargo vans. For utilizing with the passenger van, you would need to add holes in the mat where the seats connect with the floor. You can use the VanTred Custom Floor Mat for Cargo Vans - Black -…

view full answer...

Answer 7

I can absolutely confirm the correct lift kit for your trailer. Based on your photos, you do in fact have a #10 Torflex axle, and they are compatible with the lift kits because you do not have 3" high-profile brackets (which just means the…

view full answer...

Answer 8

The correct lift kit to use on your Forest River R-Pod Trailer will depend on the year. If you have a post 2014 then you will need to use the Axle Riser Kit part #LC382741 for square shaped axles or part #LC270682 for diamond shaped axles as Forest…

view full answer...

Answer 9

From what I could find, your 2016 Casita Spirit Deluxe most likely uses a Dexter torsion axle. The Torflex Lift Kit #K71-707-01 is compatible with Dexter #10 Torflex axles which is likely what you have. This lift kit raises your trailer frame by…

view full answer...

Answer 10

Actually the Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-723-01 will not fit your 1993 Jayco 1206 KB pop-up camper. This lift kit has a weight capacity of 2000 lbs., I checked online and found that your Jayco has a 2440 GVWR. The correct…

view full answer...

Answer 11

The Dexter Torflex Lift Kit #K71-707-02 referenced in your question is designed for the #10 Torflex axle with a 2,300 to 4,000 pound capacity. As you mentioned, the lift kit cannot be used with Torflex axles that use a 3 inch high profile bracket.…

view full answer...

Answer 12

The Torflex Lift Kit item #K71-707-01 is the correct kit for a #10 Dexter torsion axle and you won't need to drill any new holes into the spacers. I have attached a couple of pictures below so you can see how they look once installed. I have also…

view full answer...

Correct Lift Kit for a Wells Cargo Trailer with a Dexter P-15 3,500 lb. Axle

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching