Recommended Tow Package For A 2013 Mini Cooper

Question

Question:

I see that this will fit my 2013 Cooper JCWs but I have a question or 2. In the pictures for the product it doesnt show that it comes with a ball mount? In the picture you have with this item which I have included it shows a curved upward ball mount that would be to high for the trailer that I want to tow, if it does come with that mount do I have other options? I am assuming that the recommended wiring kit Item # 119250KIT has some install documentation or do I have to figure that out for myself? I tried calling your phone but it doesnt give options for questions about items.

asked by: Roger F

0

Expert Reply:

When it comes to installing a tow package on your 2013 Mini Cooper The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 1-1/4 inch # EH47FR does not come with a ball mount. When it comes to the draw bar I recommend The Draw-Tite Drawbar for 1-1/4 inch Hitches - 4 inch Rise - 10 inch Long - 2,000 pounds # 3594.

This ball mount is class 1 and class 2 compatible, and has a gross towing weight up to 2,000 pounds and has a tongue weight up to 200 pounds. With this drawbar you will need The 2 inch Hitch Ball - 3/4 inch Diameter x 1-9/16 inch Long Shank - Chrome - 3,500 pounds # 19258.

When it comes to installing the wiring the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT is confirmed to fit your vehicle. There will be included instruction included in the package.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

You do not have to install a ball mount at same time when installing the EcoHitch part #EH47FR but it is different with this setup. Basically you have to reach under the rear bumper and over the exhaust to install the hitch pin of a ball mount.

view full answer...

Answer 2

Your 2012 Mini Cooper S hardtop will require the EcoHitch Hidden Trailer Hitch Receiver #EH47FR. This is currently our only aftermarket receiver custom fit for your specific Mini with the center mounted dual exhaust. I recommend installing the Curt…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...