Rhino-Rack Fairing for Roof Racks - 38" Long
(66 reviews)
Price: $104.98
In Stock
Rhino-Rack Fairing for Roof Racks - 38" Long
Item # RRRF2
Retail:$190.10
Our Price: $104.98
You Save: $85.12
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (66)
- Q & A (0)
- Videos (2)
- Photos
Rhino Rack Accessories and Parts - RRRF2
- Roof Rack
- Fairings
- 38 Inch Long
- Rhino Rack
This aerodynamic fairing deflects wind around your roof rack to create a quieter ride on the road. Stylish design enhances the overall look of your roof rack. Universal mounting hardware connects to most crossbar styles.
Features:
- Aerodynamic fairing deflects air around your roof rack to reduce wind noise and drag
- Stylish design enhances the overall look of your roof rack
- Rubber bumpers prevent fairing from creating scratches and abrasions on your roof
- Easy installation on most crossbars with clamp-on brackets
- Adapter (HD-FK1) required for use with Rhino-Rack Heavy-Duty crossbars
Specs:
- Fairing length: 38"
- Maximum crossbar dimensions: 1-1/4" tall x 3-1/2" wide
- Minimum crossbar height: 7/8"
- Minimum space between crossbar legs: 30-1/2"
- Limited lifetime warranty
RF2 Rhino-Rack Wind Fairing for Roof Racks - 38" Long
Installation Details
Video of Rhino-Rack Fairing for Roof Racks - 38" Long
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Rhino-Rack Roof Rack Fairings Review
Today we'll be taking a look at the 44 inch long Rhino-Rack fairing, part number RRRF3. There's also multiple different sizes, starting with the 32-inch part number RRRF1, the 38-inch RRF2, and the 50-inch, RRRF4.Speaker 2: This fairing is going to help by deflecting the air around the vehicle, so it makes for a quieter ride when you're out on the road. This stylish design is going to help to enhance the look of the roof of your vehicle, as well as your roof rack. And when you get your fairing in your box and you pull it out, you're going to have this protective film that's going to be over the top, and you can pull this off if you so choose, or you can leave it on to protect against any kind of bugs or dings or dents on your fairing. And with the wind hitting this, you're going to see that it can bounce off the top of the vehicle, so there's going to be rubber bumpers here on the bottom to help protect the vehicle's finish. And all your tools and accessories for this that you're going to need, including your bolts, washers, clips, brackets, all that stuff will be included, including your Allen tool to fasten them and tighten them down. The Rhino-Rack fairing offers a limited lifetime warranty through the manufacturer. Now that we've gone over some features, let's show you how easy it is to install.
Just make sure that you have your back bolts undone, so the plates will slide out of the way like they have. Set it over the top of your cross-bar and then you can rotate them so they fit nice and flush. Now, this fairing will work with your round, square, elliptical, even arrow type crossbars, and some factory crossbars as well. You just need to make sure that your crossbar has a width of at least 35 1/2 inches. As you can see, these are going to be nice and contoured to the Rhino-Rack roof rack system, meeting up with all the grooves and keeping it nice and aerodynamic. Rotate the bottom around so that the hole lines up with the other hole.
Then, take your bolt, your Allen bolt with the washer, place it in the top, and start threading it in. Use your included Allen tool to tighten them down, and we'll repeat this on the other three. And as you can see when we tighten down the front ones, it's going to pull and adjust pressure to push down on the front by tightening up that back racket. You can see it coming back down it, and you just want to be careful not over-tighten these because the plastic can break. Keep in mind for all your different lengths, all the hardware and features will be the same, and that completes the look at our Rhino-Rack fairings.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Arrived Damaged
Customer Reviews
Rhino-Rack Fairing for Roof Racks - 38" Long - RRRF2
Average Customer Rating: 4.5 out of 5 stars (66 Customer Reviews)
This aerodynamic fairing deflects wind around your roof rack to create a quieter ride on the road. Stylish design enhances the overall look of your roof rack. Universal mounting hardware connects to most crossbar styles.by: John03/12/2024
Def helped with the wind noise and vibrations going down the highway. Probably could have ordered a bigger one but still works! It is used in a Chevy Volt for reference
by: Joseph H03/23/2023
NOT THAT EASY TO PUT ON WITH THE RHINO RACK.ONCE ON LOOKS GOOD.
by: Ray Y07/16/2018
The Rhino Rack 38" Fairing is a perfect fit on my RR Vortex system for 2017 Ford Focus Hatchback. Assembly and installation were quick and easy. The online order process was a snap and shipping was super quick. Thanks to eTrailer for all the product information on the website.
by: Paul M.12/03/2019
The rack is exactly what I wanted for my Ford Focus ST. I did however, go for the bigger fairing than what is recommended. I felt the recommended wind fairing was too short for the width of my car. the one I purchased is in the pictures. The recommended size would be about 1.5 inches shorter on each end. The rack is sturdy, mounts are dead on. Would purchase again for other vehicles in our household.
by: Aden01/19/2021
The wind fairing arrived really fast and was expertly packed (small and with no unnecessary packaging to ship the item safely). The fairing was super easy to mount and the instructions were very straight forward-took about 15 minutes. Great quality and works as intended.
by: Sleek03/28/2023
Application = 2021 Subaru WRX Base.
Perfect fit! Great rally look.
by: Chris03/12/2023
This was purchased for my 2019 Subaru Outback and was the closest size that fit between the roof rails. It was actually too wide and I had to trim it to fit due to how the cross bars were recessed.
The placement does restrict the use of the sunroof. If you regularly use it.
Also, if you intend to use combine this with a cargo pod, versus a rack. Do not attempt. You'd need to notch gaps into the fairing to allow mounting of the pod onto the cross rails.
I've used this twice since purchase for an experiment. Due to modifying it to make it fit my vehicle it voided the warranty/option to return it...
by: Mike R05/06/2023
We were experiencing some wind noise with the crossbars, so decided to give this a try. It works great, no noise now, good fit, simple install. A bonus- it does not ride down against the roof, so no concerns of wear on the paint.
by: Jake 01/06/2024
Fits perfectly, came quick and was assembled easily. Holds up perfectly after a year of use.
by: Todd 01/01/2024
Affordable, easy to install, and eliminated wind noise!
by: Kayla12/15/2017
I’m beyond thrilled with my roof rack! Perfect fitment, easy directions, and it is super sturdy ??
by: Jackson08/03/2022
I love this product. Just got it in the mail today, and was able to install it right away. The whistling noise from my crossbars and rooftop basket went away completely. The only thing wrong with my order, was one of the nuts on the mounting/clamp bracket was missing. I was able go to my local Home Depot and find a nut that fit perfectly. Hardly an inconvenience; the fix costed less than a dollar. I'll give a 4.5/10 rating. Will recommend to friends when theyre in the market
by: Michael03/23/2022
I was never able to use it. Once I had mounted the cargo box on roof rack, there was no way to attach the fairing. If I attached the fairing, there was no way to mount the cargo box. Never used the fairing.. still sitting in the closet.
by: Kevin 07/31/2023
Prompt & efficient service. Won’t hesitate to order more items from this site.
by: Jonah03/04/2022
This attachment looks cool and seems to do it's job when a car-top carrier is installed, however there seems to be a tapping on the roof at certain speeds and wind directions will driving. It's not consistent but is a bit annoying. Also, depending on how your carrier or roof rack attachment mounts, you will have issues with the mounting points conflicting.
by: Scott C04/03/2015
I ordered a Rhino Rack Roof Rack and Wind Fairing for my 2011 Nissan Frontier. Both items arrived on time and were exactly what I had wanted. Thank you to etrailer.
by: Christian 02/17/2020
Fits well on the Rhino Rack cross bars, on my 2016 Jeep Grand Cherokee laredo (no sunroof). It is not properly curved for the roof, but it will work its way down the extra half inch on the two sides.
by: Don M.12/14/2016
Had this item on my vehicle for a year now. No issues. The RRRF2 fit perfectly and does its job. It stops wind noise from the factory roof rack.
Well worth the money, strong, sturdy fittings. Should last for years to come. Looks great too..
by: B-rad08/11/2022
I got these for my '22 BMW X7. There are really tight on the factory rails to remove/install. Quality of the bars is solid. They do clear the sunroof.
by: Dana07/28/2018
Bought this product and was extremely happy with the service I recieved. I recieved the product a day earlier than expected awesome company I figured to buy this same product from another company and was waiting around for two weeks after that they said it would be another 2 weeks so I canceled that order and went with this company great job
by: Kt03/29/2020
Had a buzzing noise inside the car any time I went over 35 mph. Drove me and the family crazing. After purchasing and installing this on my 2018 Subaru CrossTrek the noise level dropped by 99%. It's been a year since I've installed it and I'm completely happy with this purchase.
by: Dolf09/24/2016
Product Review: The deflector works great and it was easy to fit on my Jetta Wagon with a roof carrier.
25
66
Show More Reviews
See what our Experts say about this Rhino Rack Accessories and Parts
- Fairing Recommendation for a Rhino-Rack Roof Rack on a 2016 Honda Accord SportIf your 2016 Honda Accord is a 4-door model then use Rhino-Rack fairing # RRRF2 which is 38 inches. If you have a 2-door Accord use # RRRF3 which is 44 inches. I have linked a video review of the 44 inch model for you.
view full answer...
- Fairing to Reduce Roof Rack Wind Noise on 2010 Chevrolet MalibuRound and square roof rack crossbars do tend to generate more wind noise than the costlier elliptical and aerodynamic shapes but a fairing can be added to help deflect some of the wind up and over the crossbars. A fairing will not eliminate noise but it will help reduce it. Your Euro crossbars are 49-inches long and as long as you have between the legs of the front bar at least 35-1/2-inches of space then the Rhino-Rack Fairing # RRRF3 will fit. If you do not have this much space then...
view full answer... - Fitting a Rhino Rack Fairing to a 2005 Honda Accord with a Rhino Rack Roof RackTo get the correct measurement of your leg distance, which is the measurement used to fit your fairing, you'll need to measure the distance between your roof rack legs while it is installed. This will let you know what fairings are too big, or too small, for your roof rack. I recommend picking a fairing that has a minimum measurement as close to this measurement as possible. I think you'll end up happier with the fit of the 38 inch fairing, part # RRRF2, as there will be less of a T appearance...
view full answer...
- Recommended Fairing For Rhino-Rack Vortex Crossbars on 2013 Subaru XV CrosstrekThe fairing I recommend is part # RRRF2. This fairing will work with crossbars up to 1-1/4 inch tall and 3-1/2 inches wide. The Rhino-Rack Vortex crossbars measure 1-3/16 inches tall and 3-1/8 inches wide so it is within the dimensions for the RRRF2. This fairing is 38 inches wide and requires 30-1/2 inches between crossbar legs. We also offer a longer fairing, part # RRRF3. This fairing is 44 inches long and requires 35-1/2 inches between the crossbar legs.
view full answer... - Wind Fairing for 2011 Nissan Rogue with 49 Inch Long Rhino-Rack CrossbarsRoof rack fairings usually are no long than the distance from the inside of one roof rack foot to the inside of the other. It is possible that the 44 inch model, # RRRF3, is a good fit but if you need something shorter the next size down is 38 inches, # RRRF2. And the next size larger than 44 is # RRRF4 at 50 inches. Based on a bar length of 49 inches the 44 inch model would likely be the best option for you.
view full answer... - Will the Rhino-Rack Fairing Fit the OEM Crossbars on a 2014 Subaru XV CrosstrekThe Rhino-Rack Fairing, # RRRF2, that you referenced may work with the OEM crossbars on your 2014 Subaru XV Crosstrek. It was not designed for factory crossbars, but it will fit crossbars up to 3-1/2 inches wide and between 7/8 inch and 1-1/4 inch tall. Your crossbars must also have 30-1/2 inches between the crossbar legs and 38 inches between the side rails for the fairing to fit. The Rhino-Rack fairings are going to be the closest fit option that we have for OEM crossbars. The fairings...
view full answer... - Recommended Wind Fairing For A Malone Aero2 Crossbar SystemWhen it comes to installing a wind fairing on your Malone Aero 2 Crossbar system The Rhino-Rack Fairing for Roof Racks - 38 inch Long # RRRF2 will work for your 38 inch crossbar setup. This fairing has an easy installation on most crossbars with clamp-on brackets. It also has a stylish design which enhances the overall look of your roof rack. The rubber bumpers prevent fairing from creating scratches and abrasions on your roof. I attached an installation video link below.
view full answer... - Recommended Fairing for Rola Sport Series Roof Rack on 2011 VW GTI 3 DoorThe DISCONTINUED Rola Sport Series Roof Rack with GTX Mounting System for Naked Roofs number 59736 has crossbars that are 3-1/8 inches by 1 inch. The Rhino-Rack Fairing for Roof Racks # RRRF2 will be a great fit for your 2011 VW GTI 3 door with that roof rack. Adding a fairing like this will reduce drag and wind noise.
view full answer... - Wind Fairing for a 2016 Kia Sorento With Factory OEM Roof RackYour best fit will be a 38 inch fairing, available as part # RRRF2. This will attach to an elliptical or aero style crossbar.
view full answer... - Fairing Recommendation for Rhino Rack Euro 42 inch CrossbarThe best priced fairing that's going to fit your Rhino Rack Euro bars will be the # RRRF2 that you referenced. This fairing is 38 inches long too which would match up to a 46 inch long crossbar well.
view full answer... - Wind Fairing for Rhino Rack RS 2500 Roof Rack on 2002 VW PassatThe front crossbar of the Rhino Rack you mentioned was replaced with the very similar RR39FR roof rack on your 2002 VW Passat and is going to be slightly more than 39 inches. For this rack a wind fairing that is going to work great for you is the Rhino Rack # RRRF2, which is a 38" fairing.
view full answer... - Noise Level Inside Vehicle When Adding a Roof RackThe Rola 59833 does not give a decibel increase when the rack is installed as that will change based on speed and change with the weather conditions. Most roof rack systems will have a noticeable sound because you are changing the aerodynamics of your vehicle by adding the crossbars. The bulkier the system the more noise, so square bars and bulky towers will be the worst offenders. The Rola rack you asked about has very sleek lines with aero crossbars for a more factory appearance...
view full answer... - Fairing Recommendation for the Rola Roof Rack 59833Yes, the Rhino Rack Fairing part # RRRF2 is confirmed to fit the crossbar dimensions of the Rola Sport Series Roof Rack 59833 that you referenced.
view full answer... - Will Rhino-Rack Fairing for Roof Racks Scratch Vehicle's RoofThe Rhino-Rack Fairing for Roof Racks # RRRF2 referenced in your question is going to bounce a bit from the wind when traveling with it installed. Because of this, there is no real way to prevent the bottom of the fairing from making contact with the roof of your Subaru. With this in mind, Rhino-Rack did include rubber bumpers on the bottom of the fairing for this specific reason. These bumpers will prevent the fairing from scratching or causing abrasions on your vehicle's roof. I have...
view full answer... - Is There A Load Bar Clip Compatible With The Thule AeroBlade Crossbars And The Thule Fairing 871XT?Thule actually does not offer a load bar clip to adapt your Thule Fairing 871XT, to your Thule AeroBlade Edge Roof Rack Crossbar 7502B as they claim the AeroBlade bars are quiet enough that they don't need one. Instead, what you can do is use the similar Rhino-Rack Fairing for Roof Racks # RRRF2, which is compatible with your AeroBlade crossbars.
view full answer... - Will a Rhino-Rack Fairing Fit a Rola Roof Rack on a 2012 Mazda 3 HatchbackThe Rhino-Rack fairing # RRRF2 will fit the Rola roof rack on your 2012 Mazda 3 hatchback. The fairing is a universal fit type of product that will fit crossbars that are 7/8 to 1-1/4 inches tall and up to 3-1/2 inches wide. The Rola bars do fit within those specs. I have linked a video featuring a Rhino-Rack fairing for you.
view full answer... - Size Dimensions of Rhino-Rack Fairing for Roof Racks 38 Inches LongThe Rhino-Rack Fairing for Roof Racks - 38" Long # RRRF2 will extend about 4-1/2 inches in front of your crossbar. The overall dimensions are 38 x 5 inches. I've attached a video to assist with the installation.
view full answer... - Correct Size Rhino Rack Wind Fairing for a 2013 Chrysler 200The best size wind fairing we offer for a 2013 Chrysler 200 with Rhino Rack Roof Rack would be the Rhino-Rack Fairing for Roof Racks part # RRRF2 which is 38" long. It should not interfere with any roof mounted accessories though you may need to adjust were they sit on the crossbars to ensure there won't be an issue with the two working alongside one another.
view full answer... - Direction of Wind Fairing While Installed in a Truck BedYou can mount the wind fairing either way; toward the cab or toward the tailgate. I recommend facing the wind fairing towards the cab because of the airflow that comes over the cab and into the bed will then be then rerouted upward creating less resistance while the fairing is mounted forward facing. The wind fairing, when used on a cargo basket mounted in the bed of a pickup truck, will not be nearly as effective as when used on the roof of the vehicle.
view full answer... - What Size Fairing For Rola Sport Series Roof Rack 59849 on 2020 Kia SportageThe Rola Sport Series Roof Rack with REX Mounting System for Flush, Factory Side Rails part 59849 cross bars are 53-1/2" long. Based on the recommendations from other manufacturers, I recommend the 38" Rhino-Rack Fairing for Roof Racks part # RRRF2. This size will fit between the rails on the roof of your Sportage. The fairing will help to cut down on the wind noise however, I recommend to first make sure the rubber strips are completely pressed down into the channel of your cross bars...
view full answer... - Universal Roof Rack Fairing RecommendationSounds like you are looking for a fairing for your roof rack. The Rhino Rack Fairing # RRRF2 is pretty universal and should work well for you. It can fit crossbar dimensions that are 1-1/4" tall x 3-1/2" wide.
view full answer... - Rhino Rack #JA2536 Recommended Fairings Needed 2016 Honda Accord EX-LFor the Rhino Rack JA2536 you have installed on your 2016 Honda Accord the best length fairing is going to be the 38 inch length of the Rhino Rack Fairing part # RRRF2.
view full answer... - Rhino Rack Fairing Recommendation for a 2014 Subaru Outback with Factory BarsThe Rhino-Rack Fairing # RRRF2 that you referenced should work for you. It will extend about 4-1/2 inches in front of the crossbar so it should help deflect air while clearing your sun roof. This fairing is confirmed to fit crossbars that are up to 1-1/4 inches tall and 3-1/2 inches wide. However, any time you have roof rack accessories and an open sunroof you will get a lot of noise. This might help a little bit, but it won't make it totally silent.
view full answer... - Recommended Wind Fairing for Rola Sport Series Roof Rack 59736I recommend using the Rhino-Rack Fairing for Roof Racks - 38" Long # RRRF2 which will fit on the 3-1/8" wide x 1" tall crossbars that come on the Rola Sport Series Roof Rack 59736.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
John D
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Test Fit:
Colin H
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Jeanne D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Joseph H.
3/24/2024
GREAT. STILL FAIRING THE WIND