Jeep Style Trailer Fender Equivalent to American Trailers Part # 03-010

Question

Question:

We are looking for a jeep style fender that is equivalent to the American trailer part 03-010. its a single axle 16 ga cold roll steel 8w x 26l x 10 h. Do you carry anything that meets these requirements?

asked by: Mark B

0

Expert Reply:

The Single Axle Jeep Style Trailer Fender # HP99VR is going to be the closest fender we have to your dimensions. This fender is 24" long x 8" wide x 8" tall. It is constructed of 16 gauge cold rolled steel as well.

expert reply by: Bud M

0

Answer 1

Mounting bolts are not included with the CE Smith fender mounting brackets, #CE26061G-2. You will want to use 3/8 inch stainless steel bolts with stainless nuts and lock washers or stainless nylon locking nuts to mount these brackets to your fenders.…

view full answer...

Answer 2

For an 8-inch wide jeep style aluminum tread plate fender for 8- to 12-inch wheels we offer etrailer #HP49VR. If you prefer a steel fender, Redline #J10821. We do not have any fenders that are exactly 8-1/2-inches wide. We do have 9-inch wide fenders…

view full answer...

Answer 3

I went out to the warehouse and measured the Mounting Brackets item #CE26061G-2 you referenced. The bolt hole spacing on the side with two holes is 3-1/2". The diameter of the bolt holes is 3/8". I have linked a diagram I made below.

view full answer...

Answer 4

When looking at fenders for your trailer, you will just need to make sure you choose one that is compatible with your existing wheel size. The CE Smith Single Axle Trailer Fender #CE17701G that you are looking at is designed for single-axle trailers…

view full answer...

Answer 5

I don't have a build sheet for the #HP99VR fender but I'd be happy to provide any dimensions you might need. If you can reply with the exact dimensions you're needing. I've provided a photo showing the length, width and height of the…

view full answer...

Answer 6

The dimensions we need to find a replacement fender are the length, height, and width. For example, the Fulton #F008551 is 7.35" wide x 21-1/2" long x 6.5" tall. The #HP99VR which seems to match the style of many Harbor Freight…

view full answer...

Answer 7

A trailer tire of size 5.30 x 12 has an overall diameter of right around 22-inches when mounted and fully inflated so you can refer to the linked page for trailer fenders that displays all 12-inch-wheel-compatible fenders made of steel that will weld…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 12

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Jeep Style Trailer Fender Equivalent to American Trailers Part # 03-010

Product Page this Question was Asked From

Continue Researching