Recommended Tankless Replacement for Atwood G10-2 Water Heater

Question

Question:

I want to replace my Atwood G10-2 water heater with a tankless heater. They all need 12vdc. I only have 120vac available. I am thinking I could just add an external 12vdc power supply. Or do you have one that uses 120vac?

asked by: Keith G

1

Helpful Expert Reply:

The Furrion RV Tankless Water Heater part # FR93FR with the Access Door for Furrion RV Tankless Water Heaters part # FR73FR is what you'll want to use to replace the Atwood G10-2 Water Heater. This unit runs off 12VDC as do all our tankless water heaters so you'll need to run power wires to or from the battery.

expert reply by: Conner L

1

Answer 1

You can replace the Atwood RV Water Heater AT94022 with the Furrion RV Tankless Water Heater #FR93FR, so long as you have the needed space. According to the instructions, which I have linked for you below, this Furrion unit simply requires the…

view full answer...

Answer 2

To replace your Atwood RV Water Heater, Model #GC10A-4E, the direct replacement is the Atwood RV Water Heater - Gas and Electric - part #AT94022. This is the new version of your existing water heater, so it will have all the same features like a…

view full answer...

Answer 3

I spoke with Furrion about your #FR93FR water heater, and they have told me that the reason this would occur is because either you hooked up the unit to the incorrect power source, or you have reverse polarity. This would cause the control board to…

view full answer...

Answer 4

The Furrion RV Tankless Water Heater #FR93FR would blow the fuse repeatedly if the control board was malfunctioning or if there was a short in the wiring. I recommend checking the all wiring connections first to make sure everything is secure and…

view full answer...

Answer 5

You can replace your busted standard water heater with a tankless water heater, and what you'll need to know is the amount of space you have in your cut out, as water heaters aren't specific fits for any make or model of trailer. The one I…

view full answer...

Answer 6

There are a few options when it comes to finding a tankless water heater for your 2018 Keystone Laredo 5th Wheel Rv. The main thing that comes into play here is the size of the cut out that you currently have for your water heater, which you will…

view full answer...

Answer 7

I recommend picking up the Furrion 60,000 Btu tankless water heater as this is the most popular on our site and has received numerous high ratings (it currently sits at 4.7 out of 5 stars with 189 reviews as of January 2023). This comes in a few…

view full answer...

Answer 8

Definitely a smart idea to replace your Atwood heater with a tankless unit, as they are much more energy-efficient and quicker to heat your water. We do have an option that will easily fit in place of your 16" x 15-1/2" x 20-7/8"…

view full answer...

Answer 9

You will want to check for power going into your Wall Controller #FR48NR by removing it from the wall and testing the wires with a Circuit Tester #PTW2992 that shows you battery voltage or by using a Multimeter #PT89ZR. Both wires will be blue and…

view full answer...

Answer 10

You're in the right place, lets look at the solution I have for you. ***Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU #FR93FR. **Replacement Access Door for Furrion RV Tankless Water Heater - 16" x 16" #FR43FR. I…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...