Can the Yakima MegaWarrior Basket Fit Inno Aero Crossbars?

Question

Question:

Will the Yakima Mega Warrior roof basket clamps fit the Inno Aero Crossbars or do I need to use Yakima aero bars?

asked by: Matt R

0

Expert Reply:

Yes! The MegaWarrier - Large # Y07080 and the Extra Large # Y07080-82 fit the Inno Aero Crossbars.

For a complete setup on your 2018 GMC Yukon with flush rails, I recommend the following setup:

- Inno Aero Crossbars - Aluminum - Black - 57" Long # INXB145-2
- Inno Through Feet for Aero Crossbars - Fixed Mounting Points # INXS350
- Custom Fit Kit # INTR154

With the through feet, you can rest assured that you can maximize the full 57-inch length of the crossbars. You also receive an extremely aerodynamic system that provides you with a quieter ride and increased fuel efficiency. This system provides you with 140 pounds of maximum weight capacity for storage.

If you need straps to secure your cargo to the basket, I recommend using the etrailer Cam Buckle Straps # E98876-4.

expert reply by: Bob C

0

Answer 1

Yes, the Universal MightyMounts for Yakima Roof Mounted Accessories part #Y03590 would replace the Yakima SnapAround Mounting Brackets part #Y8810135 so that you can use your Yakima bike rack with the Rhino-Rack Vortex Aero Crossbars like part…

view full answer...

Answer 2

I reached out to my contact at Yakima regarding your older RocketBox and he said there aren't any adapters available that would allow the box to fit wider aero-style crossbars using its existing hardware. Your only option to keep using this…

view full answer...

Answer 3

You are able to use the #3040-P to install the Tekonsha Primus IQ #90160 on your 2016 Lexus GX 460 without any issues. I can't say we've ever heard of anyone ever reporting this back to us and as you mentioned, the vehicle is already set up…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 11

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 12

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...