Recommended Shank for Equalizer Weight Distribution on 2020 Ram 2500 Big Horn With 2-1/2" Receiver

Question

Question:

Hello, I have 2020 ram 2500 big horn, I need 2.5 Hitch shank to install Equal-i-zer 4-Point Sway Control and Weight Distribution Hitch, 1,200/12,000 lbs could you please tell me what size shank do I need for my truck towing T273QBXL by Forest River. If you have ideas could please provide me with the product link for your website. Thank you

asked by: Soream P

1

Helpful Expert Reply:

The typical shank that comes with the Equal-i-zer Weight Distribution System # EQ37120ET has a 7" rise and 3" drop measuring 12" overall. For a shank that fits your 2-1/2" receiver to go with the # EQ37121ET I recommend the Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop # EQ90-02-4900

This shank will give you an additional 3" of drop so you have more to work with when compared to the standard 2" shank that comes with the Equal-i-zer system. This combined with the # EQ37121ET will give you a system that is compatible with the 2-1/2" receiver on your 2020 Ram 2500 Big Horn. In addition to the shank you may also need the # ALL643216 for hitch ball installation.

I have attached some review videos for your reference.

expert reply by: Robin H

1

Answer 1

Thanks for the pictures! A weight distribution hitch is recommended based off of the tongue weight of your trailer and is typically between 10% and 15% of your trailer's total weight. 580 lbs seems extremely low for a 7,600 lbs trailer.…

view full answer...

Answer 2

Thank you for the picture! The overload spring that the RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty #RAS3611-HD is referring to is located on top of the leaf spring pack. Based on the picture you provided, you will be able…

view full answer...

Answer 3

You sure can! Weight distribution shanks are not brand specific, you will just need to make sure you use a shank that is the same style as there is two different styles. Based on your picture you will need the #EQ34FR that fits the 2-1/2"…

view full answer...

Answer 4

You can certainly use a weight distribution system on your lifted truck. The key will be to find a weight distribution shank that offers you enough drop to be able to tow your trailer level. Weight distribution systems are available without a shank…

view full answer...

Answer 5

The instructions for the orientation of the Tuson Sway Control part #335TSC-1000 when installed are very specific. The red dot on the label has to be at the trailer's center line and the arrows on the label that say "Mount with this…

view full answer...

Answer 6

There sure is! Based on the picture you provided you are using an adjustable ball mount that does not use a standard hitch ball with a nut on the bottom. Since that is the case you will not be able to use friction sway control, as it needs to be…

view full answer...

Answer 7

In order to install a factory trailer brake controller on a 2021 Chevrolet Silverado 1500 you will indeed need to have the computer re-flashed at the dealer in addition to purchasing the actual controller. That said, for a much more reliable and cost…

view full answer...

Answer 8

Measuring to find the right rise or drop needed to tow the trailer level is easy. First park the truck and trailer on level ground and uncouple the trailer from the truck. Use the trailer's jack to make the trailer level. Measure from the ground…

view full answer...

Answer 9

On a towing setup you are always limited by the lowest rated component as the overall towing capacity since that is the weakest point. When it comes to trailer tires you always want to have them inflated to their max psi when cold. Not only do you…

view full answer...

Answer 10

Since you are at point where you should probably go to a higher tongue weight range setup, you need a new shank, and the bars and heads of the Equal-i-zer have to be replaced together if changing tongue weight range you'd be best served to go…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Recommended Shank for Equalizer Weight Distribution on 2020 Ram 2500 Big Horn With 2-1/2" Receiver

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching