Replacement Hubs and Bearings for Hyde Drift Boat Trailer With Dexter Axle
Question:
Hi, I have a Hyde drift boat trailer that is about 20 years old now. It looks like it has a Dexter P-15 Model SLR axle, serial # D4194687. I will be taking it across country this summer and I want to have the hubs and bearings replaced to make sure they are in tip-top shape before this long trip. Can you specify the parts I would need for this? Thank you
asked by: Matt
Expert Reply:
In order to find the correct replacement hubs and bearings for your trailer you will need to take some measurements. Unfortunately Dexter was unable to identify your axle so that is the only way to identify the parts. In order to do this you will need to remove the wheels and hubs to check out your bearings.
Your bearings may have part numbers stamped in the side. If that is not the case, you will need to measure the inner diameter of the bearings or the spindle where the bearings ride. Once you know which bearings you have you will be able to find the correct replacement hubs. I have attached a helpful diagram below which shows where to measure.
The other thing you will need to know is the bolt pattern on your hubs and whether or not you have brakes. You will want to match your current bolt pattern on the replacement. If you do not have brakes then you just need idler hubs. If you do have brakes then you will need a hub and drum assembly.
For example, if you found that you have the standard bearings for a 3,500 lb axle, which are the # L68149 inner and # L44649 outer, and had a 5 on 4-1/2 bolt pattern with brakes, you could use the # AKHD-545-35-EZ-K.
I have attached links to our bearings as well as our hub and drum assemblies. You can filter the bearings down by inner diameter. Once you have identified the bearings you can filter the hubs down based on the bearings you have. I have also attached some helpful articles on hubs and bearings for your reference.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 1,800 lbs
- Shop: Hand Winch Strap with Safety Hook, 2" Wide x 25' Long - 4,000 lbs.
- Shop: Fulton Single Speed Trailer Winch - 9" Long Handle, 20' Strap - Zinc - 1,800 lbs
- Q&A: How To Tell If Bearing Buddy Has Enough Grease
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: Blue Ox Patriot Portable Braking System Installation - 2022 Ford F-150
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Shop: Grease Seals 10-36 (pair)
- Search Results: 25580
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: 05680-C Master Cylinder Replacement for Trailer Recommendation
- Q&A: Parts Needed to Install Brake Controller on 2012 Chrysler Town and Country
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Brake Controller
- Search Results: 68149
- Article: Most Popular Wheel Bearings
- Video: Redarc Tow-Pro Wiring Adapter Review
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: dust cap
- Video: Redarc Brake Controller 331-TPH-017 Review
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Article: How to Measure for Trailer Hitch Drop
- Search Results: 14125a
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Shop: Suspension Enhancement
- Video: Dutton-Lainson Trailer Winch - Standard Hand Winch - DL14627 Review