Cruiser License Plate Frame - Die Cast Zinc - Chrome
(744 reviews)
Price: $16.94
In Stock
Cruiser License Plate Frame - Die Cast Zinc - Chrome
Item # CR58230
Our Price: $16.94
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (744)
- Q & A (0)
- Videos (1)
- Photos
Cruiser License Plates and Frames - CR58230
- Miscellaneous
- Plain
- Tag Frame
- Zinc
- Cruiser
Contoured license plate frame adds an aesthetic touch to your vehicle. Die-cast zinc construction with a chrome finish resists corrosion and abrasion. Slotted holes allow for visibility of your state registration stickers.
Features:
- License plate frame enhances the look of your vehicle's license plate
- Slotted holes let you adjust the frame to avoid obstruction of state name or registration stickers
- Contoured design provides a sleek, modern look
- Durable zinc die-cast metal resists corrosion
- Chrome finish
- Easy installation with your vehicle's existing hardware
- Anti-theft, anti-rattle installation hardware (sold separately) available in standard or metric
- Dimensions: 6" tall x 12" wide
Note: Check your state's regulations before installing.
58230 Cruiser Accessories Contour License Plate Frame - Zinc Die Cast Metal - Chrome
California residents: click here
Video of Cruiser License Plate Frame - Die Cast Zinc - Chrome
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Cruiser License Plates and Frames - Chrome - CR58230
Michael: Hi, there. I'm Michael with etrailer.com. Today, we're going to take a quick look at the contoured license plate frame. This is going to enhance the look of your vehicle's license plate. You can see we've got a nice contoured design. It's going to give us a sleek, modern look.
It's got a chrome finish over durable die-cast zinc, so it's going to be very eye-catching, shiny, and it's also going to resist corrosion to last a nice, long time. We've got slotted holes here that will allow us to adjust the frame to avoid obstruction of our state name or registration stickers. That's a nice little feature there.As far as our dimensions, our total width . we're looking at right about 12.5 inches from side to side. Our height, right about 6 and 5/8 of an inch tall.
It's going to be very easy to get this installed. Use the same hardware that you've currently got installed on your license plate. It'll hold both the frame and the license plate together.One thing to keep in mind: laws vary from state to state as to what license plate covers you can have. You do want to check your local regulations to make sure that this is going to comply with those before you install it, or purchase it. But as far as covers go, this is a very nice one.
If you have a eye-catching car, you're wanting to dress up the license plate a little bit, I think this will do a good job for you. It is very shiny. It's got those nice curves to it, so it's a very nice addition to an already good looking car. That's going to complete our look at the contoured license plate frame.
Customer Reviews
Cruiser License Plate Frame - Die Cast Zinc - Chrome - CR58230
Average Customer Rating: 4.8 out of 5 stars (744 Customer Reviews)
Contoured license plate frame adds an aesthetic touch to your vehicle. Die-cast zinc construction with a chrome finish resists corrosion and abrasion. Slotted holes allow for visibility of your state registration stickers.by: Mac10/09/2023
Looks cool, but disappointed at how soon after install it began pitting, even with pretreatment of FluidFilm before installation....
by: Michael 10/07/2022
Awesome selection,Great Quality- No cheap crap here!!!
by: Gregory 07/09/2022
by: Esther 10/15/2021
by: Jimmie02/16/2023
by: Mark02/05/2024
The item I bought came today. It was out of stock when I ordered it but the folks at E-Trailer communicated well with me throughout the process. I am also one of their listed installers of trailer hitches. They have always been great to work with!
by: Janey shivers12/11/2023
Gave the golf license plate to brother in law and is now being proudly displayed on his personal golf cart. All his golf buddies are envious. License plate was more than I expected. Great gift
by: Damon 07/20/2022
Quality frame, heavy metal, not the cheap easy to bend stuff you see out there. I even bought a backup camera that goes between the top mounting holes. I just snipped the metal between the holes and the camera dropped right in.
by: Neecole03/01/2023
Nice product,very durable/ long lasting as extremely stylish.
by: Tim 02/03/2024
High quality, provides a very clean look without covering any plate lettering.
by: Gordon Agnew03/31/2016
Only problem I had was a slight delay due to understocking and manufacturer in China. It would be nice if the factory would bevel the edges so they're not quite so sharp. But, I've handled worse things than that. The mirror finish is flawless and I wouldn't think twice about ordering again. I think my pictures pretty much say it all. This truck is a 1998. Yes, it's eighteen years old!
by: Albert08/24/2019
What a great licens plate frame a for boat trailer. After a year it still looks as good as the day I installed it.
by: John from Long Island12/15/2018
This RAM license plate holder was just what was needed to replace the generic dealer
plate holders. They are made of a sturdy quality chrome plated metal, and have swing away RAM logos to cover the top plate mounting screws.
They are beautiful and make the truck look so much better. etrailer is a great place to get them from for both price and service.
Don't forget the fastener caps "CR82630" if your plate fastens at the bottom.
by: Kent R03/12/2017
Plate frames look great on my new Durango. The front went on without a hitch, but the back frame had to be cut. There is a back up camera located where the top middle of the plate frame needs to mount. In short 3 inches of the top middle of the frame needs to be cut out in order for the product to work. If your good with your hand tools it's no big deal and still looks great but if your a person without tool skills it wont work out of the box, photo enclosed. I would give it a 5 star for looks and a 3 star to install on a 2014 to 2017 Durango with back up camera
by: Leslie R11/13/2019
I purchased the Golf Club license plate frame for my golf fanatic spouse. He loves it....ordering was easy, delivery was swift, and the license plate frame has held up extremely well 1 year later! He has received lots of compliments and I wholeheartedly recommend this product and this company!
by: Renee 03/14/2024
I love it..... i will probably end up ordering more for my friends.
renee
by: Sabra08/05/2019
I carefully chose from all the tropical license plate holders. This was the best looking one of palm trees. It looks just as advertised. I’m so pleased with this product.
by: James04/23/2018
I bought a pair of barbed-wire plate holders for my 2013 F=150. I got them at a really good price and they were delivered fast. I spray-painted them with antique rust-colored Rust-Oleum paint and they look awesome. I'm getting compliments right and left.
by: Christi04/18/2021
I have an Arizona Highways Specialty license plate and love the slim rim license plate frame because it gives full visibility of the beautiful plate. I had to purchase another frame for my new vehicle. Thank you so much for the product and fast service. My husband and I both have slim rim frames.
by: Marsh10/03/2020
My new tribal license plate frames plus plastic cover shields really dress up our new Subaru turbo Outback. Easy to install. Very nice product. Thank you!
by: Elaine01/05/2021
Fast shipping! Product came in tact. Packaging was really good. I’m from the islands and I love my palm tree license plate holder!
by: Joe M.10/01/2013
Hi-gloss finish matches chrome. Stainless steel should hold up to harsh Midwest winter, (and road salt); that will be the real test. The last "chrome metal" frame I bought was pitted and ruined after 1 winter, so that is why I stepped up to this one. This is a very thin frame with sharp edges, but otherwise nicely finished. Good bling factor.
by: Steve06/29/2014
This frame was exactly what I was looking for. Its evenly thin edge all the way around my plate is super clean and non-obtrusive. The frame is as shiny as triple plated chrome, but shouldn't pit after 1 winter like my last frame because of its high quality stainless steel construction. It has a very flat surface and fits exactly as I hoped it would.
by: Ken04/01/2018
I had been looking for just the right license plate frame for my Chevelle and found this one. It fits and looks perfect. I love it!
by: Arf Dell01/13/2018
I needed good quality frames that don't detract from the license plate, and this fit perfectly. Well-crafted, smart-looking, and at a great price!
25
739
Show More Reviews
See what our Experts say about this Cruiser License Plates and Frames
Info for this part was:
Edited by:
Lindsey S
Updated by:
Mary K
Written by:
Halie H
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
10/10/2023
Unfortunately, with license plate frames sometimes pitting will happen over time, especially if there have been a lot of chemicals on the roads. I would recommend taking a look at an aluminum option like part # CR20820.