Brake Flange Bolt Hole Spacing of 3,500 lb Trailer Spindle TRU77FR
Question:
tru77fr what is the center to center dimension on the flange mounting bolts . in need a hub that has 2 3/8 by 2 1/2
asked by: Ken
Expert Reply:
The #84 E-Z Lube Spindle with Brake Flange for 3,500-lb Trailer Axles # TRU77FR has a brake flange with the standard bolt hole spacing of 2-7/8 inches apart on center. There isn't a flange available with 2-3/8 inch by 2-1/2 inch spacing, but we do have hubs as well as brakes that you can use with this spindle:
- Trailer Hub and Drum Assembly - 3.5K E-Z Lube Axles - 10" Diameter - Pre-Greased # AKHD-545-35-EZ-K
- Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA
- Mounting Hardware for 10" Brake Assemblies # BRKH10B
I have added links below to video reviews for you to check out as well if you'd like to take a look.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles
- Trailer Spindles
- EZ Lube Spindle
- Round
- For 3500 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Parts Needed To Add Electric Drum Brakes To A Pontoon Trailer
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Q&A: Picking Out Hubs and Brake Assemblies for Tandem Axle Trailer that Weighs 6k
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Replacement Braking Assembly and Bearing Kit for AxleTek Brakes
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Replacement Hub/Drum, Brakes, & Bearings For Camper With 3,500 lb Axle
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Q&A: Finding the Correct Electric Trailer Brake Assembly for Lippert Components 2800 lb Axle