Can Factory Wiring of 2020 Hyundai Palisade be Used with Stealth Hitch

Question

Question:

Can the stock wiring for the factory installed tow hitch be used instead of the wiring kit that comes with the Stealth Hitch? In other words, can the stock tow hitch be swapped with the Stealth Hitch without needing to rewire anything?

asked by: Ramin

0

Expert Reply:

Yes, if you wanted to use the OEM wiring of your 2020 Hyundai Palisade instead of what comes with the Stealth Hitch part # 391HYUNPALIS19T that fits it you certainly could and it would work just as good.

expert reply by: Jameson C

0

Answer 1

Just spoke with my rep at Stealth Hitch about your Stealth Hitches Hidden Rack Receiver item #391HYUNPALIS19. There are several different versions of that receptacle that are all physically the same, but have different markings for wire colors…

view full answer...

Answer 2

I completely understand. You are coming to the etrailer website to get clarification about what items are compatible with your vehicle and then you see two products by the same manufacturer both saying they are compatible with your 2022 Hyundai…

view full answer...

Answer 3

The base receiver that comes with the Stealth Hitches Hidden Rack Receiver, part #391HYUNPALIS19, has a height to the top of the receiver hitch from the ground of 13-1/2". This being a 2" receiver, the height from the ground to the bottom…

view full answer...

Answer 4

When it comes to the ball mount that comes with the Stealth hitch #391HYUNPALIS19T for your 2021 Hyundai Palisade, the height of the ground clearance measures 18 inches from the ground to the top of the ball. If you need help installing the Stealth…

view full answer...

Answer 5

The Stealth Hitches Trailer Hitch Receiver w/ Towing Package part #391HYUNPALIS19T is designed with a ball mount that is 18" from the ground on the 2020 Hyundai Palisade. They test fit their hitches so that the ball mount is 18" from the…

view full answer...

Answer 6

Though The Stealth Hitches Hidden Rack Receiver #SH46FR is confirmed to fit your 2019 BMW X3 this hitch is only for hitch-mounted accessories only so you will not be able to attach safety cables. You will need The Stealth Hitches Hidden Trailer Hitch…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...