Best Ground Clearance with Trailer Hitch for 2015 Toyota RAV4

Question

Question:

I just put on a hitch #75235 on my 2015 Toyota Rav4. But it looks way too low. The bottom of the 2inch square sits 9.5inch above ground. With a cargo carrier, if I am on a steep hill, I think it would be possible to hit it. Is there another hitch that would sit higher? Would I have to cut the fascia or remove the cover in the back? Is there a picture of what it would look like? Or is there an adapter to move up the height 2-3 inches?

asked by: Javier F

0

Expert Reply:

The most ground clearance offered with a trailer hitch for a 2015 Toyota RAV4 is the Curt Trailer Hitch Receiver part # C13406. This hitch has a hidden design so the receiver tube will be tucked up under the bumper as close as possible giving you the most ground clearance. It does require that you trim the fascia so you can get a tighter fit. It's still possible certain situations will require you to use caution when going up a steep incline but this hitch will be best to reduce this chance.

expert reply by: Conner L

0

Answer 1

The hitch height of the Curt #C13406 on most 2017 Toyota RAV4 is going to be 15" from the top of the receiver to the ground, but this is going to vary slightly from vehicle to vehicle depending on the suspension condition. I've linked our…

view full answer...

Answer 2

The etrailer Class III Hitch Receiver Hitch #e98864 referenced in your question is confirmed to fit your 2016 Toyota RAV4. For the 2016 (to current) model years of the RAV4, there is actually a unique series of installation steps that deal…

view full answer...

Answer 3

When we installed the Draw Tite hitch part #e98864 you referenced on a similar 2007 Toyota RAV4 we found that from the center of the hitch pin out to the furthest point out on the rear spare measured 7 inches. So basically, as long as your bike rack…

view full answer...

Answer 4

When it comes to the towing capacity for a vehicle the manufacturer is the final authority. You can check the owners manual or directly with a dealer and that's what has to be gone by otherwise the warranty of the vehicle would be voided. We…

view full answer...

Answer 5

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 6

For your 2018 Toyota RAV4 we have Class II hitches that have 1-1/4 inch openings like the Curt #C12108 and we have what I recommend the Class III 2 inch hitches like the etrailer.com hitch part #E98864. The two attached pictures show either size. The…

view full answer...

Answer 7

The etrailer Trailer Hitch Receiver part #e98864 is a confirmed fit for a 2016 Toyota RAV4 Hybrid XLE. It's a great bolt-on option with no drilling or welding required. It comes with everything needed for installation except common hand tools.

view full answer...

Answer 8

For your 2018 Toyota RAV4 I highly recommend the Curt Class III Max Frame #C13406 because it features the sleek hidden crosstube design that you're looking for where only the 2 inch receiver is visible from behind the vehicle. I have attached a…

view full answer...

Answer 9

For your 2017 Toyota RAV4 the etrailer hitch part #e98864 is a confirmed fit and will be your best option. This is a Class III hitch with a 2 inch opening that will have plenty of capacity and will work great. I attached an install video for this…

view full answer...

Answer 10

For your 2016 Toyota RAV4 Hybrid the etrailer hitch part #e98864 is a confirmed fit and would work well. With the appearance panel you have the choice of removing it all together or trimming it to allow the hitch fit. It really serves no other…

view full answer...

Answer 11

For your 2017 Toyota RAV4 Hybrid, I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Class III - 2" #e98864. This hitch will not require you to trim any visible parts like fascia, but may require trimming or removal of underbody…

view full answer...

Answer 12

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

view full answer...