Recommendation for Hidden Trailer Hitch on 2018 Toyota RAV4

Question

Question:

Hi. Please help me with a finding a trailer hitch for my vehicle a 2018 Toyota RAV4 that is well hidden I would like to not have something ugly on the vehicle if you know what I mean ha. Thank you.

asked by: James

0

Expert Reply:

For your 2018 Toyota RAV4 I highly recommend the Curt Class III Max Frame # C13406 because it features the sleek hidden crosstube design that you're looking for where only the 2 inch receiver is visible from behind the vehicle. I have attached a couple images of this hitch installed on the RAV4 so you can see exactly how it will look.

This Class III hitch will use existing holes in the vehicle's frame for a no-drill installation and it features a 3,500 pound towing weight capacity with a 350 pound tongue weight limit. Its black powder coat finish will also protect it from any rust or corrosion over time.

I have attached an installation video that you can use for reference.

If you plan on doing any towing I recommend the Tekonsha T-One Vehicle Wiring Harness # 118578 because of its superior amp capacity and simple installation. The custom harness will plug right into factory ports inside the trunk behind the driver and passenger tail lights. It will provide you with a 4-Way connector to connect with and power a trailer's basic signal lights.

I have again attached an install video that you can check out.

Lastly in order to tow a trailer you will need a ball mount and hitch ball. I have attached a great article that explains how to choose the best one for your setup along with a link that will take you to our available selection.

expert reply by: Chris R

0

click to enlarge

Answer 1

The hitch for your 2018 Toyota Rav4 that has the best ground clearance is the Curt part #C13406 as it sits the highest and also because only the hitch opening hangs below the rear bumper which means turning into an elevation change like a steep…

view full answer...

Answer 2

I compared ground clearance measurements for all of the 2" trailer hitch receivers we have for your 2017 Toyota RAV4 and found that the Curt Trailer Hitch Receiver part #C13406 has a great clearance from the ground to the top of the hitch…

view full answer...

Answer 3

The Curt hitch part #C13406 does fit the hybrid models of the 2018 Toyota RAV4.

view full answer...

Answer 4

The etrailer Class III Hitch Receiver Hitch #e98864 referenced in your question is confirmed to fit your 2016 Toyota RAV4. For the 2016 (to current) model years of the RAV4, there is actually a unique series of installation steps that deal…

view full answer...

Answer 5

When installing the Curt #C13406 you're going trim the fascia about 4" x 1-3/4". I've linked the instruction video of the installation of this hitch so you can check out the process.

view full answer...

Answer 6

The keyless entry sensor on your 2016 Toyota RAV4 Hybrid is located under the rear bumper on the passenger side of the vehicle. The installation instructions for the Curt Trailer Hitch Receiver part #C13406 state to move this under the cross tube of…

view full answer...

Answer 7

When we installed the Draw Tite hitch part #e98864 you referenced on a similar 2007 Toyota RAV4 we found that from the center of the hitch pin out to the furthest point out on the rear spare measured 7 inches. So basically, as long as your bike rack…

view full answer...

Answer 8

For your 2017 Toyota RAV4 Hybrid, I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Class III - 2" #e98864. This hitch will not require you to trim any visible parts like fascia, but may require trimming or removal of underbody…

view full answer...

Answer 9

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

view full answer...

Answer 10

When it comes to the towing capacity for a vehicle the manufacturer is the final authority. You can check the owners manual or directly with a dealer and that's what has to be gone by otherwise the warranty of the vehicle would be voided. We…

view full answer...

Answer 11

For your 2018 Toyota RAV4 we have Class II hitches that have 1-1/4 inch openings like the Curt #C12108 and we have what I recommend the Class III 2 inch hitches like the etrailer.com hitch part #E98864. The two attached pictures show either size. The…

view full answer...

Answer 12

There are a couple key differences between the round tube Curt #C13149 and the square tube Curt #C13406, but from what I could find out, the maximum towing capacity of a 2016 RAV4 is 1,500 pounds, which will make the tongue weight capacity 150 pounds…

view full answer...