Is the etrailer Hitch a Fit for a 2016 Toyota RAV4 Hybrid XLE

Question

Question:

Dear Sir/Madam, I had a 2016 Toyota RAV4 Hybrid XLE and please confirm the hitch e98864 fitting into it. Thank you very much for your help. Sincerely,

asked by: Chris

0

Expert Reply:

The etrailer Trailer Hitch Receiver part # e98864 is a confirmed fit for a 2016 Toyota RAV4 Hybrid XLE. It's a great bolt-on option with no drilling or welding required. It comes with everything needed for installation except common hand tools.

expert reply by: Conner L

0

Answer 1

The etrailer Class III Hitch Receiver Hitch #e98864 referenced in your question is confirmed to fit your 2016 Toyota RAV4. For the 2016 (to current) model years of the RAV4, there is actually a unique series of installation steps that deal…

view full answer...

Answer 2

For 2-3/8 inch 3,500 lb axles the Lippert shock kit part #LC281255 that you mentioned is the correct kit to use. This kit would fit and work well on your 2015 Keystone Bullet 272 BHS with tandem axles.

view full answer...

Answer 3

For your 2016 Toyota RAV4 Hybrid the etrailer hitch part #e98864 is a confirmed fit and would work well. With the appearance panel you have the choice of removing it all together or trimming it to allow the hitch fit. It really serves no other…

view full answer...

Answer 4

For your 2018 Toyota RAV4 we have Class II hitches that have 1-1/4 inch openings like the Curt #C12108 and we have what I recommend the Class III 2 inch hitches like the etrailer.com hitch part #E98864. The two attached pictures show either size. The…

view full answer...

Answer 5

The most ground clearance offered with a trailer hitch for a 2015 Toyota RAV4 is the Curt Trailer Hitch Receiver part #C13406. This hitch has a hidden design so the receiver tube will be tucked up under the bumper as close as possible giving you the…

view full answer...

Answer 6

For your 2017 Toyota RAV4 Hybrid, I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Class III - 2" #e98864. This hitch will not require you to trim any visible parts like fascia, but may require trimming or removal of underbody…

view full answer...

Answer 7

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

view full answer...

Answer 8

When it comes to the towing capacity for a vehicle the manufacturer is the final authority. You can check the owners manual or directly with a dealer and that's what has to be gone by otherwise the warranty of the vehicle would be voided. We…

view full answer...

Answer 9

The only concealed cross tube trailer hitch we offer for a 2018 Toyota RAV4 is the EcoHitch Hidden Trailer Hitch Receiver part #306-X7219. This trailer hitch features a bolt-on, no drill install with 2" receiver that can be used for towing or…

view full answer...

Answer 10

When we installed the Draw Tite hitch part #e98864 you referenced on a similar 2007 Toyota RAV4 we found that from the center of the hitch pin out to the furthest point out on the rear spare measured 7 inches. So basically, as long as your bike rack…

view full answer...

Answer 11

There are a couple key differences between the round tube Curt #C13149 and the square tube Curt #C13406, but from what I could find out, the maximum towing capacity of a 2016 RAV4 is 1,500 pounds, which will make the tongue weight capacity 150 pounds…

view full answer...

Answer 12

For your 2018 Toyota RAV4 I highly recommend the Curt Class III Max Frame #C13406 because it features the sleek hidden crosstube design that you're looking for where only the 2 inch receiver is visible from behind the vehicle. I have attached a…

view full answer...

Is the etrailer Hitch a Fit for a 2016 Toyota RAV4 Hybrid XLE

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching