Recommend Curt T-Connector Harness # C56225 for 2012 Nissan Frontier

Question

Question:

can I buy the relay part since I already bought the flat connector that plugs under the vehicle

asked by: AL

0

Expert Reply:

The relays you need for your 2012 Nissan Frontier are part # C57000. This relay kit includes the large brown relay which activates the 12-volt power circuit, and the smaller blue relays which activate the turn signals. I have linked you to the Installation video for this kit.

expert reply by: Jeffrey L

0

Answer 1

For a 2014 Nissan Xterra you can use wiring harness #C56225, which you have referenced. This is the correct harness for an Xterra that did not come with a factory 4-Way or 7-Way trailer connector. The relays will be needed for the activation of the…

view full answer...

Answer 2

There are some Nissan vehicles that require an additional relay from a Nissan dealer to make everything fully functional. However if you have found all the relays in the proper places and have installed the relays in wiring harness #C65225 as…

view full answer...

Answer 3

One way would be to check the original window sticker for the vehicle for the tow package being listed. Other way would be to take the VIN to a Nissan dealer and have them run it to find out. If you do not have any factory trailer wiring currently…

view full answer...

Answer 4

If your 2014 Nissan Xterra PRO4X did not come with a factory tow package then Curt wiring harness #C55441 will not work. It is designed for models that came with a factory tow package. For models without a tow package you would use #C56225. I have…

view full answer...

Answer 5

On the 2010 Nissan Frontier, if the vehicle did not come with a factory tow package it will not have a functioning wiring harness even if the Tow Ready Wiring Harness, part #118263, is added. There will be relays that will need to be inserted to…

view full answer...

Answer 6

If your truck did not come with a trailer hitch or wiring harness from the factory and you only need a 4-way flat trailer connector, then you would need the Curt T-Connector Wiring Harness, #C56225, as you pointed out. The additional relay harness is…

view full answer...

Answer 7

At this time we do not have the relays and wiring connector sold separately for the Curt T-Connector Vehicle Wiring Harness #C56225. This part is required for the 4-way flat trailer connector to function if your 2007 Nissan Xterra came from the…

view full answer...

Answer 8

Trailer wiring harness #118263 is designed to fit as a replace if your 2006 Nissan Frontier came with a factory 4-Way. If you added it without the factory tow package then it would not be functional or fully functional. You would instead need…

view full answer...

Answer 9

I am glad to help you get your 2011 Frontier ready for towing with a hitch, wiring and brake controller. Instead of Curt hitch #13241 I recommend the Draw-Tite #75282 since it offers a higher tongue weight (TW) capacity (of 750-lbs versus 500-lbs for…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...