bing tracking image
Q & A Icon

Does a Trailer Brake Controller Need Connected On Tekonsha Harness 22114 For Charge Line To Operate?  

Question:

Hello, I installed this harness on my 2018 Transit 250. Did not wire in the brake controller harness and am not getting power to the 7-pin. Does the brake controller need to be wired in for the 7-pin to work? I prefer not to use the controller harness as I will not be using a brake controller.

0

Expert Reply:

The brake controller harness does not need to be wired in for the Tekonsha OEM Replacement Vehicle Wiring Harness # 22114 to work on your 2018 Ford Transit T250. There are 2 power wires that must be connected for the rest of the harness to function properly. The red wire from the harness uses a 15amp fuse to the battery and the black wire on the harness uses a 30amp fuse to the battery. The black wire is what carries power for the charge line on the 7-way.

I have included an image of the wiring diagram from the instructions that are linked below. If everything is connected correctly a Test Light # PTW2993 will allow you to test for power along the black wire to the 7-way to determine where power is lost.

expert reply by:
0
Bud M
Tekonsha OEM Replacement Vehicle Wiring Harness 22114 Wiring Diagram
Tekonsha OEM Replacement Vehicle Wiring Harness 22114 Wiring Diagram
(click to enlarge)

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>