Recommended Camper Tie Downs For A 2020 Ram 3500 Crew Cab Dually 8' Bed

Question

Question:

I am looking for the torque lift tiedowns for a 2020 ram 3500 crew cab duly. The numbers on your website say I need a 2142 for the front but then I look at another number and it says I need a 2140 which one is the correct number for the front mounts only?

asked by: Glenn

0

Expert Reply:

For your 2020 Ram 3500 Crew Cab Dually With an 8 Foot Bed - with board or step extending under bed and with a factory installed hitch you'll need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD2142 for the front.

If you end up needing the rear mounts too you'll want the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLD3112.

expert reply by: Kevin C

0

Answer 1

I have a couple of pictures that I have linked for you showing the installed tie downs to use as reference. On the TorkLift Custom Frame-Mounted Camper Tie-Downs Front part #TLD2142 and Rear part #TLD3112 there are no notes in regards to temporarily…

view full answer...

Answer 2

The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2020 Ram 3500 with factory hitch and 8' bed is part #TLD3112 for the rear and part #TLD2140 for the front. This is a direct bolt-on fit option with no drilling required. In order to…

view full answer...

Answer 3

I have a solution for you, but the HappiJac FT-UT9 is designed for older model Dodge and Ford trucks, so they're not the correct tie downs. Additionally, there is not a HappiJac tie down that we have available for your 2020 Ram 3500 dually long…

view full answer...

Answer 4

For your 2020 Ram 3500, you can use the Torklift Custom Frame-Mounted Camper Tie-Downs #TLD2140 for the front, and #TLD3112 for the rear.

view full answer...

Answer 5

I can tell you some quick measurements to take to determine if the Brophy Clamp On Camper Tie-Downs #HSBP will fit your 2006 Dodge Ram, but these are universal tie-downs and there is not an application guide specific to your truck. That said, it is…

view full answer...

Answer 6

For your 2020 Ram 3500 dually the correct Torklift tie downs are the part #TLD2142 and #TLD3112. You may also need the part #TLA7004 and to determine that you'd need to measure from front of camper slide in point to rear anchor point; kit is…

view full answer...

Answer 7

Your 2019 Ram 3500 4X4 diesel with the 8' bed and factory running boards under the cab. You have two options, depending on your vehicle's options. If you have the 8' bed with a fixed board under your cab with factory installed hitch, you…

view full answer...

Answer 8

Given how your truck is equipped, you'd want to go with either the Torklift #TLD2140-TLD3112 which are constructed of steel or #TL94FR-TL34FR which are stainless and aluminum. Either set will work with OEM fender flares, according to Torklift. If…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...