What is the Center to Center Measurement on TorkLift SuperTruss Hitch Extension Tubes

Question

Question:

What is the distance between the center line of both tube that go into the hitch? Im making a custom hitch for my flatbed for the SuperTruss Extension Thanks

asked by: Thomas C

1

Helpful Expert Reply:

The center to center measurement on the TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 48" Long # TLE1548 is 3". Keep in mind, this extension is designed to be used with a TorkLift SuperHitch like the # TLD1111-30.

expert reply by: Robin H

1

Answer 1

The 48 inch long Torklift SuperTruss part #TLE1548 is rated for weight distribution. But since it has a single 2 inch hitch opening at the end of it you'd have to go with a weight distribution designed for a standard 2 inch hitch unlike the…

view full answer...

Answer 2

Unlike other hitch extensions the Torklift Hitch Extension part #TLE1548 that you referenced does not have a set percentage for the capacity lost when used in a hitch. Instead it has a set number capacity it would have when used with the higher rated…

view full answer...

Answer 3

Thanks for the pictures! My main concern in recommending a shorter extension, like the 36" TorkLift SuperTruss item #TLE1536, is clearance when making turns. The 36" would clear your camper and allow you to install your tow bar without…

view full answer...

Answer 4

In order to get the extension you're wanting, you'll need to replace the existing hitch with a TorkLift SuperHitch, part #TLF1002-30 and use a SuperTruss extender like part #TLE1548. If you'd care to reply with the year and model of your…

view full answer...

Answer 5

That specific of info is not available from Torklift. The best info they have is to state that when you use the #TLE1548 with a SuperHitch the tongue weight is reduced to 600 lbs without a weight distribution system or 1,200 lbs with a weight…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

What is the Center to Center Measurement on TorkLift SuperTruss Hitch Extension Tubes

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching