TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2"
(28 reviews)
Price: $1,125.29
In Stock
TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2"
Item # TLD1111-30
Our Price: $1,125.29
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (28)
- Q & A (0)
- Photos
TorkLift Trailer Hitch - TLD1111-30
- 2-1/2 Inch Hitch
- 2 Inch Hitch
- 20000 lbs GTW
- TorkLift
- 2500 lbs TW
- Custom Fit Hitch
Get a 2-1/2" receiver and 2" receiver on the same hitch. Tow a trailer and carry a bike rack simultaneously. Haul up to 30,000 lbs with TorkLift's exclusive weight distribution (sold separately). Pre-drilled for camper tie-downs.
Features:
- Heavy-duty hitch lets you tow hefty loads, even when using a TorkLift hitch extension or weight distribution system (sold separately)
- Max out the 30,000-lb capacity with TorkLift's specially designed Everest weight distribution system (TLWD1000 - sold separately)
- Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time
- Compatible with industry-standard ball mounts and hitch accessories
- Truck-camper-friendly TorkLift design
- Pre-drilled to accept TorkLift camper tie-downs (sold separately)
- SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper
- Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability
- Hardened, reinforced hitch pin holes prevent elongation from wear
- Bolt-on installation - no welding required
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish resists corrosion
- Safety chain loops are built in
- 2 Hitch pins and clips included - hitch locks sold separately
- Custom fit for your vehicle
- Made in the USA
Specs:
- Top receiver opening: 2-1/2" x 2-1/2"
- 2" x 2" Adapter sleeve included
- Bottom receiver opening: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 20,000 lbs
- Maximum GTW when used with weight distribution: 30,000 lbs
- Maximum tongue weight: 2,500 lbs
- Maximum TW when used with weight distribution: 3,000 lbs
- Maximum gross trailer weight: 20,000 lbs
- Cross tube dimensions: 4" x 4"
- Lifetime warranty
With the SuperHitch Magnum, you get a 2-1/2" receiver for heavy-duty towing and a 2" receiver for standard towing. Add on the TorkLift Everest weight distribution system (TLWD1000 - sold separately), which is designed exclusively for SuperHitch hitches, and you can max out the 30,000-lb weight capacity of the hitch.
With 2 receivers, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time. And if you have a truck bed camper, this hitch has pre-drilled mounting points for TorkLift's super-sturdy camper tie-towns (sold separately). You can also add one of TorkLift's SuperTruss hitch extensions (sold separately) to extend the top receiver of the SuperHitch so that it clears your camper, allowing you to tow your trailer while your camper's installed.
Truck Bed Camper Compatibility
TorkLift is known for their truck camper tie-down systems and other camper accessories, so it just makes sense that they would have camper enthusiasts in mind when designing a trailer hitch. Each SuperHitch is built with integrated mounting points for TorkLift camper tie-downs, making it easier than ever to get a quality tie-down system for your slide-in camper.
The dual-receiver design of the SuperHitch also makes it easy to tow with your truck bed camper in place. The SuperTruss line of high-capacity hitch extenders is specially designed to extend the hitch receiver back far enough to clear your bed-mounted camper, while still allowing for an excellent towing capacity. An ordinary hitch extender can dramatically reduce your towing capacity. But each SuperTruss extension forms such a solid connection with the SuperHitch that the setup is able to maintain one of the highest weight capacities in the industry. When used with a standard weight distribution system, the setup can maintain up to a 10,000-lb weight limit, even with an extension that is 60" long. As a result, you can clear almost any truck bed camper and still do some heavy-duty towing.
Dual Receivers for Maximum Versatility
With the SuperHitch from TorkLift, you can tow your trailer and use a hitch-mounted bike rack or cargo carrier at the same time. This is thanks to the dual-receiver design of the SuperHitch.
Most trailer hitches have a single receiver. Typically, you can find an adapter or extension piece that will slide into your hitch to give you 2 receivers, but these adapters dramatically reduce both your towing capacity and your tongue weight, limiting how much you can tow, as well as how much you can carry with a bike rack or cargo carrier. Each SuperHitch is specially constructed to maintain a high weight capacity so that you can use the 2 receivers without sacrificing towing or carrying ability.
The SuperHitch Magnum features a 2-1/2" x 2-1/2" receiver for heavy-duty towing. Directly beneath this receiver is a 2" x 2" opening that is designed to meet your standard towing needs. Want to tow a trailer and carry a bike rack or cargo carrier at the same time? Just slide the included adapter sleeve into the top tube to convert it to a 2" receiver. This way you can use your 2" hitch-mounted accessories and use the bottom 2" receiver to tow a trailer at the same time.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff is available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it, and we've towed with it, so whatever your question, we can answer it.
D1111-30 Tork Lift Magnum 30K Super Hitch with 2 Receivers
This Product Fits The Following Vehicles
- 2019 - 2024 Ram 3500 6-1/2 Foot Bed with factory hitch
- 2019 - 2024 Ram 3500 8 Foot Bed with factory hitch
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Manufacturer issue
- etrailer mistake
- etrailer mistake
Customer Reviews
TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" - TLD1111-30
Average Customer Rating: 4.9 out of 5 stars (28 Customer Reviews)
Get a 2-1/2" receiver and 2" receiver on the same hitch. Tow a trailer and carry a bike rack simultaneously. Haul up to 30,000 lbs with TorkLift's exclusive weight distribution (sold separately). Pre-drilled for camper tie-downs.by: Quinn09/03/2023
Installed on a 2022 Ram Laramie. Good construction. Yes, you need to lift the box to remove the factory hitch. Not a complicated issue if you use a porta power. Where this product falls short is the powder coated finish. 8 months after install and it is starting to flake and rust. Poor prep and no primer coat. After year two, it will need to be stripped and redone correctly or it will look awful. Likely a cost cutting measure as quality powder coating is not cheap.
by: Darren 04/26/2024
After watching the video install on your web site this thing was a breeze!! The video was spot on. I did the entire install by myself in about 2 1/2 hours. Thanks for a great product!!
by: Michael 03/12/2024
It is a extremely heavy duty well made hitch.
by: Robert02/09/2021
This a beast, I have a 50” over hang on my camper and it tows a 2200 lb trailer with a 5500 lb Jeep no problem
by: Chris08/16/2022
2019 Ram 3500
Love the hitch, but we needed to remove the bed to our 2019 RAM 3500 to remove the existing one and hook this one up. Sort of a pain.
The receiver is beastly and very well made.
by: Abby 10/06/2021
2021 Ram 3500
A SuperHitch is a must have to us. We use with the SuperTruss extension so that we can tow our enclosed trailer behind our truck w/cabover camper. Grateful to not have to stress about the weight and still bring our toys camping!
by: William03/13/2020
The quality is amazing, I received my order in a couple of days. I guarantee you won’t find a better specialty hitch on the market. The service was Great as well.
William
3/14/2021
Worth every penny. If you are worried about the price, forget it. I wouldn’t buy any other product on the market right now. No one even comes close to torklift...
by: Thomas08/18/2021
Excellent hitch, well designed with very good installation instructions. It ships in two boxes, one of which etrailer didn't bother to ship with my order. I discovered my missing parts 1/2 way through the job and was very dissatisfied with the process and time to get the missing pieces.
by: Calvin 01/04/2023
Very solid hitch
by: Jeremy 05/21/2021
2020 Ram 3500
The hitch is everything it was advertised to be. Unfortunately it took etrailer a month to even ship it although they said that it was in stock.
by: Brett 05/28/2021
Instructions were easy to follow, reciever install was smooth.
by: David04/05/2022
This product is well built, and the step by step install instruction were easy to follow, and designed specifically for my vehicle.
by: Julie 11/20/2020
Great company to deal with! Customer service is wonderful with excellent follow-up.
by: Jason 09/19/2020
This has worked out great.
by: 05/16/2023
2019 Ram 3500
by: Keith05/16/2022
by: Ken 01/08/2024
2024 Ram 3500
by: Andy03/04/2021
by: Thomas 09/21/2022
by: Jeff 11/10/2021
by: Patrick 07/25/2022
2021 Ram 3500
by: John 06/25/2021
by: Carson Pass09/10/2021
by: Lawrence 08/14/2022
2021 Ram 3500
by: Tim 10/01/2022
25
28
Show More Reviews
See what our Experts say about this TorkLift Trailer Hitch
- Is Factory Trailer Hitch Removed to Install TorkLift SuperHitch Magnum on 2019 Ram 3500You will need to remove the factory trailer hitch from your 2019 Ram 3500 to install the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLD1111-30. I have attached a cutout of what the SuperHitch Magnum looks like assembled for you to get an idea of how it will look on your pickup. The 2" receiver that comes with the SuperHitch Magnum should sit in the same place as your OEM receiver so the only difference is that there will be a 2-1/2" receiver directly below it. One the SuperHitch...
view full answer...
- Parts Needed to Tow and Use Camper For 2019 Ram 3500 Mega Cab Short Bed With Factory HitchOkay, so there's a lot to get to here, starting with the fact that since you need an extension, you will also need to add a TorkLift hitch and weight distribution system. The reason for that is, standard extenders don't have the capacity needed for you to tow, but you can do this if you add the TorkLift hitch and extenders. The only thing I can't tell you is the length you need as that's something you'll have to measure for. But there are a variety of lengths available. For your 2019 Ram...
view full answer... - Are Spare Tire Mount Modifications Needed to Install Torklift Hitch on 2023 Ram 3500 Short BedWhen we had the chance to install the Torklift hitch part # TLD1111-30 on a short bed truck like your 2023 Ram 3500 we did not have to modify the spare mount so I would not anticipate that being an issue. If you check out the install video link you can see more info on this.
view full answer... - Tie Down Extensions for TorkLift SuperHitch Magnum on 2020 Ram 3500It sounds like you're looking for the TorkLift Camper Anchor Relocation Kit # TLA7004. These bolt onto your truck-bed camper to relocate the anchor points if the distance between the front bumper of your camper and the center of the rear anchor point is less than 90". If you don't already have the hitch, the # TL49YR is the correct fit for the 2020 Ram 3500 Cab and Chassis. If you have the 6-1/2' or 8' bed model with the factory hitch then you need the # TLD1111-30 instead.
view full answer... - Can I Use a TorkLift SuperHitch for a 2014 Ram 3500 on a 2019 Ram 3500It looks like there is less than 1/4" difference between the frame width of the 2014 Ram 3500 and the 2019 Ram 3500, but as you mentioned - the B&W # BWHDRH25503 is a fit for both of these vehicles and there are no dimensional differences between the B&W and the TorkLift # TLD1108-30. The main differences between the TorkLift SuperHitch # TLD1111-30 and the older # TLD1108-30 is that the TLD1111-30 has the stacked 2" and 2-1/2" receivers that require the removal of the factory hitch. This...
view full answer... - Highest Rated Trailer Hitch for 2019 Ram 3500 with Factory HitchThe highest rated trailer hitch we offer for your 2019 Ram 3500 that currently has a factory hitch is the Torklift part # TLD1111-30 which has a 2-1/2 inch hitch opening and is rated for 20,000 lbs trailer weight and 2,500 lbs tongue weight.
view full answer... - TorkLift SuperHitch Magnum Trailer Hitch Receiver For a 2024 Ram 3500 PickupYes, the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLD1111-30 will fit your 2024 Ram 3500 long bed dually. This hitch fits both the short bed and long bed including dually and single rear wheels. It will replace your factory hitch.
view full answer... - Torklift Superhitch Magnum and Camper Tie Downs that Fit 2020 Ram 3500There was a big enough change between the 2017 and 2020 Ram 3500 that a new hitch and tie downs would be required. For the hitch you'd want the part # TLD1111-30 and for the tie downs # TLD2142 and # TLR3510.
view full answer... - What is the Center to Center Measurement on TorkLift SuperTruss Hitch Extension TubesThe center to center measurement on the TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 48" Long # TLE1548 is 3". Keep in mind, this extension is designed to be used with a TorkLift SuperHitch like the # TLD1111-30.
view full answer... - How To Use TorkLift Super Truss For 2" Hitches In TorkLift SuperHitch TLD1111-30 For 2020 Ram 3500We have just what you are looking for. The TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" # TLD1111-30 you were looking at has a 2-1/2" upper receiver and a 2" lower receiver, and an adapter to reduce the 2-1/2" receiver down to 2". To be able to use the TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 24" Long # TLE1524 you will need to use the reducer mentioned above. With your hitch this extension will have a 750lb...
view full answer... - Recommended Hitch for a 2022 Ram 3500 We have a couple of options depending on the bed length of your 2022 Ram 3500 and whether or not you have the factory hitch. If you have the factory hitch you will want the TorkLift SuperHitch Magnum Trailer Hitch Receiver item # TLD1111-30. This is compatible with both the 6-1/2' and 8' bed models. This hitch has a 2-1/2" and 2" receiver with a maximum capacity of 20,000 lbs. With this hitch you will be able to use the TorkLift SuperTruss Hitch Extension item # TLE1542 you were looking...
view full answer... - Solution for 36 Inch Hitch Extension on 2020 Ram 3500 With Arctic Fox 992 CamperThe only other extension that will meet your 36" requirement is the Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long # RP45018. This extension would have a maximum gross trailer weight of 7,500 lbs/750 lbs of tongue weight at 41" with weight distribution. Also, this does not have lateral-support safety chains like the TorkLift does. When you use a really long extension like the # TLE1536 there is a lot of additional force. This is why it seems like overkill to use this...
view full answer... - Correct TorkLift Trailer Hitch Receiver for a 2020 Ram 3500The correct TorkLift Trailer Hitch Receiver for a 2020 Ram 3500 is the SuperHitch Magnum part # TLD1111-30. The SuperHitch Magnum is the only option available for a 2020 Ram 3500. The TorkLift SuperHitch Original Trailer Hitch Receiver is not an option unfortunately. I have attached a list of available TorkLift SuperTruss Hitch Extensions below.
view full answer... - Solution for Needing Higher Capacity Hitch Extension for 2021 Ram 3500When it comes to higher towing capacities and hitch extensions the Torklift extensions are the only way to go like with the part # TLE1536. So to use this with your 2021 Ram 3500 you would need the Torklift hitch part # TLD1111-30 which fits underneath the factory hitch. The install really isn't too bad actually.
view full answer... - torklift component questionsI have a couple of suggestions for you but you are really doing good on your kit so far. The TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLD1111-30 is what you want for the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear part # TLR3510 and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front part # TLD2141 are a confirmed fit so to this point you are golden. For the suspension upgrades what you have will work. Using the TorkLift StableLoad Suspension Upgrade w...
view full answer... - Replacing Factory Trailer Hitch to Install TorkLift SuperHitch Magnum Hitch on 2019 Ram 3500Yes, in order to install the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLD1111-30 on your 2019 Ram 3500 you will need to first remove the factory trailer hitch. On the new Ram trucks this does require a bit of an effort but unlike previous models where the hitch was actually integrated into the frame, it is possible. My contact at TorkLift said that you will first need to unbolt the factory hitch from the frame, and then actually unbolt the bed from the truck. You will then...
view full answer... - Recommended TorkLift SuperHitch For A 2018 Ram 3500 Dually Crew Cab Even if the mounting points on the frame match up the same between the 2018 and 2019 there are still numerous other factors that can affect the fitment of a hitch like the TorkLift # TLD1111-30. Per TorkLift, the only compatible fit for a 2018 Ram 3500 Dually crew cab would be the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLD1108-30. This hitch only has one receiver and will use your factory hitch as the second receiver. If you have a short bed it will most likely also require...
view full answer... - Recommend Hitch for a 48 Extension on a 2023 Ram 3500Thanks for the picture! To use the TorkLift SuperTruss Hitch Extension 48" Long item # TLE1548 with your 2022 Ram 3500 you are going to want the TorkLift SuperHitch Magnum Trailer Hitch Receiver item # TLD1111-30. This hitch is custom fit and bolts to your Ram 3500 with included hardware. It fits both the 6-1/2' and 8' bed trucks along with single rear wheel and dual rear wheels so long as you have the factory hitch. I really like this hitch because it has both a 2" and 2-1/2" receiver...
view full answer...
- 42" Trailer Hitch Receiver Extension For 2020 Ram 3500The TorkLift Cannon Hitch Extension # TLE1642 is designed to work with trucks that have a 3" factory cross bar style trailer hitch receiver. To my knowledge I have only ever seen those on the 2017 and newer Ford F-350's. I believe that your 2020 Ram 3500 has a 2-1/2" receiver from the factory. If that is the case you will need to replace your hitch with the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLD1111-30. Then you will be able to use the TorkLift SuperTruss Hitch Extension...
view full answer... - Best Superhitch for my 2019 Ram 3500 DuallyYes we have the solution for you. TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" part # TLD1111-30 is a confirmed fit for your 2019 Ram 3500 dual rear wheel as long as it has the factory hitch. This hitch will offer a straight forward installation and use your factory connection points without any modifications of the vehicle itself. If using an in bed camper you can use one of the many TorkLift SuperTruss Hitch Extension for SuperHitches to...
view full answer... - Parts Needed to Tow Destination Trailer with 2021 Ram 3500 and TorkLift Everest WDHYes. In order to bumper tow a trailer of that size and use a TorkLift Everest system like the # TLWD1000 you'll need to remove the factory hitch and install a dual receiver like the TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" # TLD1111-30. This dual hitch receiver provides the support needed to tow a trailer with that tongue weight and GVWR. In addition to the new hitch receiver for your vehicle, the SuperHitch Magnum does not come with a hitch...
view full answer... - Which Rear Torklift Tie Down to Use with SuperHitch on 2019 Ram 3500If you install the Torklift Superhitch Magnum part # TLD1111-30 on your 2019 Ram 3500 that currently has the rear tie down part # TLD3112 and a factory hitch you would need to replace the tie down with the part # TLR3510 according to Torklift. So yes you would need to replace the rear tie down at same time.
view full answer... - Can I Use The TorkLift SuperTruss Hitch Extension From a 1998 Ram On a 2022 Ram 3500 Truck? The TorkLift SuperTruss # TLE1536 is designed to be used with any truck using a Torklift SuperHitch receiver. So you will be able to use it with the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLD1111-30 which fits your 2022 Ram 3500 with the factory receiver.
view full answer... - High Capacity Trailer Hitch for 2019 Ram 3500 Towing Trailer with SXSHonestly 3,000 lbs of tongue weight is going to be too heavy for a 3500 Ram truck. The hitch you mentioned fits trucks with a narrower chassis and wouldn't be a good fit for the 3500. You'd want to look into another 5500 or 4500 truck.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Jonathan Y
Written by:
Kristina F
Updated by:
Isabelle B
Test Fit:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
9/9/2023
I recommend touching up the hitch with a rust resistant paint like Rustoleum. With exposure to road debris hitches can experience scratches and nicks which leads to rust.
Helpful Links
faq-rust-prevention-maintenance.aspx