Recommended Hitch w/ a 2 Inch Receiver for a 2020 Mazda 3

Question

Question:

Hi guys, I’m having a little trouble picking out a hitch kit for my car: 2020 Mazda 3 SEDAN I have the hitch bike rack already but it’s 2”. If I’ll need it please also point me to the correct adapter. Thank you!

asked by: Jim

0

Expert Reply:

I would be happy to help you. For your 2020 Mazda 3 Sedan you're going to want the EcoHitch Hidden Trailer Hitch Receiver item # EH23VR. This hitch has a 2" receiver opening and you will not need an adapter to use your bike rack. This hitch is custom fit and bolts directly to your Mazda's frame with included hardware.

expert reply by: Jerred H

0

Answer 1

No, it does not. I checked with our vendors and the only hitch that fits a 2023 Mazda 3 sedan is the Draw-Tite Trailer Hitch item #24982. This is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum…

view full answer...

Answer 2

Absolutely! Starting with the trailer hitch for your 2020 Mazda 3 Hatchback, the Curt Hitch #C98BR will work perfectly. This will line right up to existing holes in the frame rails for a simple bolt-on (no-drill) installation and features a 200 pound…

view full answer...

Answer 3

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 4

For your 2021 Mazda 3 there is actually only the one option, the Curt #C98BR which is a Class I trailer hitch with a 1-1/4" receiver; the tongue weight rating is for 200 lbs. Although this has a towing weight rating of 2,000 lbs, it should be…

view full answer...

Answer 5

There is actually only 1 trailer hitch that fits your 2020 Mazda 3 Hatchback so it definitely cuts down on what we need to filter through. The Curt #C98BR is a Class I trailer hitch rated for 2,000 lbs towing and has a 1-1/4" receiver rated for…

view full answer...

Answer 6

Yes, the Curt Hitch Receiver - Custom Fit part #C98BR for the 2019 Mazda 3 hatchback has a 200 lb tongue weight capacity so you want to make sure the bike rack weight plus the weight of the bikes does not exceed 200 lbs. You also want to make sure…

view full answer...

Answer 7

The Draw-Tite Class I hitch, part #24984 is a fit for all models of the 2021 Mazda 3 according to Draw-Tite. Usually, the on the more sporty models of small cars, the dual exhaust can present a fit problem, but as you can see in the linked…

view full answer...

Answer 8

There is no trimming required for the Curt Trailer Hitch Receiver part #C98BR on a 2022 Mazda 3. The only thing we typically see creating noise after install is heat shields and mufflers. The bumper and hitch are both fixed so this is not likely the…

view full answer...

Answer 9

You are correct that the hatchback hitch is a different model from the sedan hitch. The Curt Trailer Hitch Receiver #C98BR is the model that is confirmed to fit your 2019 Mazda 3 hatchback. A bike rack like the Thule Camber 2 Bike Rack #TH9058 is a…

view full answer...

Answer 10

The trailer hitch I recommend for a 2020 Mazda 3 Hatchback is the Curt Trailer Hitch Receiver part #C98BR. This hitch is a custom bolt-on fit with no major modifications required. The instillation process should only take around thirty minutes to an…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...