What Weight Do I Need To Consider When Carrying Bikes On A Class I Hitch

Question

Question:

Just want to make sure I understand correctly...for a hitch mounted rack with bikes loaded, I just need to make sure the total weight rack + bikes does not exceed the 200lb TW of this hitch. Is that right? Tongue weight and total load of bike rack on Mazda 3 hatch

asked by: David

0

Expert Reply:

Yes, the Curt Hitch Receiver - Custom Fit part # C98BR for the 2019 Mazda 3 hatchback has a 200 lb tongue weight capacity so you want to make sure the bike rack weight plus the weight of the bikes does not exceed 200 lbs.

You also want to make sure the bike rack is a Class I compatible bike rack so it will fit into the hitch. We also do not recommend to carry more than 2 bikes on a Class I hitch because more than 2 bikes can put too much leverage on the setup which can cause damage to the vehicle's frame.

If you tell me which bike rack you have or are looking at I can let you know if it's compatible.

If you do not have a Class I bike rack, I recommend Thule Helium Pro 2 Bike Rack part # TH9042PRO because it only weighs 19 lbs compared to other hanging bike racks that can weigh up to 40 lbs. The Helium's lightweight construction will also allow you to carry more weight in bikes and will be easy to take in and out of the hitch. It also comes with a bike and hitch lock so there is not a need to purchase them separately.

expert reply by: Heather A

0

Answer 1

The Draw-Tite Class I hitch, part #24984 is a fit for all models of the 2021 Mazda 3 according to Draw-Tite. Usually, the on the more sporty models of small cars, the dual exhaust can present a fit problem, but as you can see in the linked…

view full answer...

Answer 2

The trailer hitch I recommend for a 2020 Mazda 3 Hatchback is the Curt Trailer Hitch Receiver part #C98BR. This hitch is a custom bolt-on fit with no major modifications required. The instillation process should only take around thirty minutes to an…

view full answer...

Answer 3

You are correct that the hatchback hitch is a different model from the sedan hitch. The Curt Trailer Hitch Receiver #C98BR is the model that is confirmed to fit your 2019 Mazda 3 hatchback. A bike rack like the Thule Camber 2 Bike Rack #TH9058 is a…

view full answer...

Answer 4

Absolutely! Starting with the trailer hitch for your 2020 Mazda 3 Hatchback, the Curt Hitch #C98BR will work perfectly. This will line right up to existing holes in the frame rails for a simple bolt-on (no-drill) installation and features a 200 pound…

view full answer...

Answer 5

I would be happy to help you. For your 2020 Mazda 3 Sedan you're going to want the EcoHitch Hidden Trailer Hitch Receiver item #EH23VR. This hitch has a 2" receiver opening and you will not need an adapter to use your bike rack. This hitch…

view full answer...

Answer 6

There is no trimming required for the Curt Trailer Hitch Receiver part #C98BR on a 2022 Mazda 3. The only thing we typically see creating noise after install is heat shields and mufflers. The bumper and hitch are both fixed so this is not likely the…

view full answer...

Answer 7

There is actually only 1 trailer hitch that fits your 2020 Mazda 3 Hatchback so it definitely cuts down on what we need to filter through. The Curt #C98BR is a Class I trailer hitch rated for 2,000 lbs towing and has a 1-1/4" receiver rated for…

view full answer...

Answer 8

I have a hitch for your 2020 Mazda 3 hatchback but there are no 2" receivers available. At this point I would say there is not going to be one made for it. You can still do some towing with the Curt item #C98BR. This hitch has a 1-1/4"…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

What Weight Do I Need To Consider When Carrying Bikes On A Class I Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching