What 4-Way Flat Connector Is Compatible With My 2020 Mazda 6

Question

Question:

Hi Etrailer, Will this wire harnes fit a 2020 mazda 6? Thank you!

asked by: Tim

0

Expert Reply:

The wiring harness that will fit your 2020 Mazda 6 is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part # C56300. It comes with a custom wiring harness that will plug into your existing wiring, no splicing necessary. The T-One wiring harness you attached to your question will not fit your vehicle.

I have included a product description link and a video installation of this item on a 2020 Mazda MX-5 Miata, which will be similar, below.

expert reply by: Mark Smith

0

Answer 1

We can get your 2020 Mazda 6 set up for towing, and the hitch will indeed fit your Signature model, which I verified with the manufacturer for you. I'll go ahead and list out all of the parts you will need for this: - Curt Trailer Hitch Receiver…

view full answer...

Answer 2

If sounds like you may have LED lights on the trailer you are towing your 2017 Mazda CX-3 with. What is likely happening is that is a little bit of power on the lighting circuits for the T-Connector #C56300 and since LEDs use next to no power that…

view full answer...

Answer 3

The Curt Universal 3 Wire to 2 Wire Harness, #C56190, that you purchased was designed to connect directly to your vehicles tail light circuits. This wiring harness was not designed to connect to a specific box or connector on any particular vehicle.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...