2021 Ford Mustang Mach-E GT Trailer Wiring Harness

Question

Question:

is there trailer light wiring that come with this part or would that need to be added?

asked by: Phillip N

0

Expert Reply:

The Draw-Tite 76460 hitch which we offer as part # DT92MR is a fit for your 2021 Ford Mustang Mach-E, but the trailer wiring is sold separately as part # C59236.

expert reply by: Mike L

0

Answer 1

It sure will! The Draw-Tite Max Frame Trailer Hitch Receiver #DT92MR you were looking at was designed specifically for the 2021 Ford Mustang Mach-E. This hitch has a 350lb tongue weight rating and 3500lb trailer weight rating making it a perfect…

view full answer...

Answer 2

There are a couple options currently available for the 2021 Ford Mustang Mach-E. There is the Curt Trailer Hitch Receiver, #C77ER and the Draw-Tite Max-Frame, #DT92MR. Each of these options install in a similar way and do so without the need for…

view full answer...

Answer 3

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2", part #DT92MR, hitch receiver. This hitch receiver has a maximum tongue weight of 350lbs and a maximum tow weight of 3500lbs. I like the Draw-Tite hitch…

view full answer...

Answer 4

I'd recommend the US made Curt Class III hitch, part #C77ER. Ford doesn't recommend towing with your vehicle, but using a hitch as an attachment point for a bike rack would work just fine.

view full answer...

Answer 5

The Curt Trailer Hitch Receiver #C77ER, is a 2" Custom fit Class III receiver hitch for the 2021 Mustang Mach-E. This currently has a 4.9 rating from customers and there has been no feedback that its installation has caused any issues with OEM…

view full answer...

Answer 6

As we haven't had the chance to install either the Curt #C77ER or the Draw-Tite #DT92MR on a 2021 Mustang Mach-E, I went out and measured from the center of the first bolt hole to the end of the receiver opening on both hitches. The Curt will sit…

view full answer...

Answer 7

The hitch that would limit access to the hands free liftgate option of your 2021 Ford Mustang Mach-E the least would be the Curt part #C77ER as there is a bit less material around the hitch tube compared to the Draw Tite #DT92MR. With either option…

view full answer...

Answer 8

Unfortunately, it does not appear that you can install a traditional aftermarket roof rack on your Ford Mustang Mach-E. It does not matter if you have the 2021 or the 2022. There is one option left, if you prefer carrying your items on the roof of…

view full answer...

Answer 9

Yes there are. The wiring harness you will need is a 4-way wiring harness. With this harness, your trailer will mirror the brake lights, running lights, and turn signals of your tow vehicle. My recommended 4-way wiring harness is the Curt #C59236.

view full answer...

Answer 10

I have a vehicle wiring harness recommendation for you, but the Curt Trailer Hitch Receiver #C77ER you were looking at for your 2021 Ford Mustang Mach-E does not include a wiring harness and trailer hitch receivers do not include the wiring. All you…

view full answer...

Answer 11

The Class II Curt Hitch #C12136 and Class II Draw-Tite Hitch #36493 for your 2016 Subaru Outback Wagon are very similar, but every Class I and Class II and some Class III Curt Hitches require stabilizing straps to be used when towing non trailer…

view full answer...

Answer 12

It isn't the actual bumper, but you will need to trim the fascia underneath your 2023 Ford Mustang Mach-E to install the Draw-Tite hitch that fits, which is the following part number: - Draw-Tite Max-Frame Trailer Hitch Receiver #DT92MR. I have…

view full answer...