Recommended Wiring Harness For My 2022 Ford Mustang Mach-E

Question

Question:

Are there wiring harness available for my 2022 Ford Mustang Mach-E?

asked by: Noah

0

Expert Reply:

Yes there are. The wiring harness you will need is a 4-way wiring harness. With this harness, your trailer will mirror the brake lights, running lights, and turn signals of your tow vehicle. My recommended 4-way wiring harness is the Curt # C59236.

expert reply by: Mark Smith

0

Answer 1

Yes, you would want to use a 4-way mounting bracket like the part #18144 with the Hidden Hitch part #DT72GR to mount the 4-way of the Tekonsha harness part #TK24vr that is a fit for your 2022 Ford Mustang Mach-E. The hitch comes with a bracket for…

view full answer...

Answer 2

Yes, we have a great hitch for your 2022 Ford Mustang Mach-E that will have your vehicle looking like it did from the factory when you are not towing. It is the Hidden Hitch by Draw-Tite Trailer Hitch Receiver item #DT72GR. This hitch is custom fit…

view full answer...

Answer 3

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2", part #DT92MR, hitch receiver. This hitch receiver has a maximum tongue weight of 350lbs and a maximum tow weight of 3500lbs. I like the Draw-Tite hitch…

view full answer...

Answer 4

I have a vehicle wiring harness recommendation for you, but the Curt Trailer Hitch Receiver #C77ER you were looking at for your 2021 Ford Mustang Mach-E does not include a wiring harness and trailer hitch receivers do not include the wiring. All you…

view full answer...

Answer 5

Since you have 5 wires coming from each tail light on your new trailer, the first thing I recommend doing is testing each wire for function. You can use a spare 12V battery to test each wire to see what they active on the tail light assemblies.…

view full answer...

Answer 6

If the running lights are on all the time, even the rear tail lights, then it should be easy to find the one wire that is hot all the time. So what you would do is basically find the wire you think it might be when the vehicle is on. Then turn the…

view full answer...

Answer 7

The Draw-Tite 76460 hitch which we offer as part #DT92MR is a fit for your 2021 Ford Mustang Mach-E, but the trailer wiring is sold separately as part #C59236.

view full answer...

Answer 8

There are a couple options currently available for the 2021 Ford Mustang Mach-E. There is the Curt Trailer Hitch Receiver, #C77ER and the Draw-Tite Max-Frame, #DT92MR. Each of these options install in a similar way and do so without the need for…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Recommended Wiring Harness For My 2022 Ford Mustang Mach-E

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching