Is the Blue Ox SwayPro Weight Distribution System BXW1500-S Available

Question

Question:

BXW1500-S. Could you provide me with the direct link?

asked by: Tom S

0

Expert Reply:

While we only carry the Blue Ox SwayPro Weight Distribution w/ Sway Control # BXW1500, the only difference between the # BXW1500 and the BXW1500-S is the shank that is included. The # BXW1500 comes with the Blue Ox SwayPro Weight Distribution Shank # BXW4000 (vertical adjustment of 8-3/4"), while the BXW1500-S comes with the Blue Ox SwayPro Weight Distribution Shank # BXW4002 (vertical adjustment of 11-1/4").

If you are needing the additional drop that the BXW1500-S provides you can just add the Blue Ox SwayPro Weight Distribution Shank # BXW4002 to the Blue Ox SwayPro Weight Distribution w/ Sway Control # BXW1500.

expert reply by: Scott S

0

Answer 1

While the holes are still spaced 1-1/4" apart for the Reese Weight Dist Shank #RP54970 I do recommend staying with the Blue Ox Shank #BXW4001 The Blue Ox uses a solid shank unlike the Reese which has ears that are not as strong.

view full answer...

Answer 2

The solution you came up with is the best solution to allow you the needed tailgate clearance. The Equal-i-zer shank part #EQ90-02-4600 will give you the clearance you need and while it is longer the added length would not significantly change the…

view full answer...

Answer 3

The distance between the mounting holes of the Reese Shank part #RP54970 is 1-1/4 inches and the diameter of the holes is 3/4 of an inch.

view full answer...

Answer 4

The combined load of your 4 tires and wheels just needs to match or exceed the loaded weight of your trailer minus its tongue weight. If your trailer will weigh 3 tons (6,000 pounds) I recommend getting trailer tires that have a maximum load of at…

view full answer...

Answer 5

I would recommend that Blue Ox TrackPro #BLU77FR simply because it does not have lift chains like the SwayPro #BXW1006. Both will do a great job but the TrackPro will have a little less movement because of the absence of drop chains. Blue Ox is a…

view full answer...

Answer 6

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...