Do You Carry a Stainless Steel Strap with an Automatic Retractor?

Question

Question:

Hello, for our new building project we need tension belts with automatic retractor. - Requirements for the tensioning strap: Stainless steel I found this tensioning strap on your website. Is it also available in stainless steel? And if so, can you send me a data sheet? Example: CargoBuckle G3 Retractable Ratchet Tie-Down Straps - Bolt On - 2 x 6 - 1,167 lbs - Qty 2

asked by: Chris H

0

Expert Reply:

I have a possible solution for you. Unfortunately, we do not carry a stainless steel version of the CargoBuckle G3 # IMF18800. However, a great stainless steel alternative we carry is the BoatBuckle G2 Retractable, Ratchet Transom Tie-Downs # IMF14256. The BoatBuckle G2 comes with an automatic retractor as well as a stainless steel design. I went ahead and attached a review video that walks you through the specs of the G2.

expert reply by: Bob C

0

Answer 1

Yes, I believe a 10mm bolt will work just fine with the CargoBuckle Ratchet Straps #IMF18800. The bolt provided with the straps is a 3/8" bolt so like 9.5mm. The plastics housing on the back gives a bit of extra space for the bolt so it will fit…

view full answer...

Answer 2

Based on the information I could find for the DICO 45264 is was popular on ShoreLand'r trailers. This would require the Idler Hub #AKIHUB-545-35-G-EZ-K with the Grease Seal #168255TB used instead of the seal included with the hub. We currently do…

view full answer...

Answer 3

We have a video review of the CargoBuckle G3 Retractable, Ratcheting Tie-Down Straps, #IMF18800, and I have linked it for you. Installation is straight forward. The straps have a mounting hole on the base and include nuts, bolts, and washers. All you…

view full answer...

Answer 4

The DeeMaxx Disc Brake Kit #DE82FR comes with 2 Slip-on rotors, calipers and brackets for one axle. The slip on rotors are for a 6 on 5-1/2" idler hubs and the mounting brackets fit on a 5 bolt brake flange.

view full answer...

Answer 5

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 6

Though we do not sell complete conversion kits with all the necessary parts to convert to disc brakes, we do have all the parts to put it together for your 10,000 pound Dexter axle we have a couple options. The first option is the Kodiak Disc Brake…

view full answer...

Answer 7

The biggest difference will be price. The two harnesses are basically the same harness made by two different companies. The Curt part #C55382 would be what I would go with over the Hopkins #42475 because the price is better and because we seem to…

view full answer...

Do You Carry a Stainless Steel Strap with an Automatic Retractor?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching