Complete Disc Brake Conversion Kit For A Tandem 10,000 Pound Dexter Axle
Question:
Do you offer a complete hydraulic conversion kit for 10k dexter / lippert axles or have any of the components, ie backing plates with shoes and wheel cylinders or line kits. I see you have the 1600 psi hydrastar pumps. My trailers have 2 axles each.
asked by: Thomas F
Expert Reply:
Though we do not sell complete conversion kits with all the necessary parts to convert to disc brakes, we do have all the parts to put it together for your 10,000 pound Dexter axle we have a couple options.
The first option is the Kodiak Disc Brake Kit # K2R1058D11E. This kit is designed for Dexter axles with oil bath hubs that are made after May 2013. The second option is the # K2R1058D11HD. This kit is made for axles prior to 2009. Both systems mentioned are slip-on-over-the-hub rotors. If you're having trouble removing your current hub from the drum you can use The Trailer Idler Hub Assembly for 10,000 pound axles # 8-214-5 or # 8-214-5UC1. This will provide you with new bearings, seals, and races.
The Hydrastar Electric Over Hydraulic Actuator for Disc Brakes # HBA16 has electronic, proportional pressure valves that will ensure that the braking is smooth and effective. It also has a built-in bleeder screw that lets you easily flush air out of the brake lines. The Brake Line Kit # 24TA-BLKIT will run brake fluid from your surge brake actuator to your trailer brakes.
Finally a breakaway kit # 3802308 and controller # RED44FR are needed to complete the installation.
I attached some review videos and helpful links below.
Products Referenced in This Question
Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Top Load
- Trailer Breakaway Kit
- Kit with Charger
- Top Load
- Single-axle
- Tandem-axle
- LED Tester
- 1 Amp Charger
- Battery Included
- 5 Ah
- Bright Way
more information >
Trailer Idler Hub Assembly for 10,000-lb Axles - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 395S
- 387A
- For 10000 lbs Axles
- 5/8 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Dexter Trailer Idler Hub Assembly for 10,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub
- Standard
- 395S
- 387A
- For 10000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Kodiak Disc Brake Kit - 11" Rotor - 8 on 6-1/2 - E-Coat Finish - Leaf Spring - 10,000-lb Dexter
- Trailer Brakes
- Disc Brakes
- Standard Grade
- 8 on 6-1/2 Inch
- Rotor
- 10000 lbs Axle
- 16 Inch Wheel
- Kodiak
more information >
Kodiak Disc Brake Kit - 11" Rotor - 8 on 6-1/2 - E-Coat - Leaf Spring - 10K Dexter and Lippert
- Trailer Brakes
- Disc Brakes
- Standard Grade
- 8 on 6-1/2 Inch
- Rotor
- 10000 lbs Axle
- 16 Inch Wheel
- Kodiak
more information >
Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Dash-Mounted Knob
- Hidden
- Up to 3 Axles
- Indicator Lights
- Redarc
more information >
Product Page this Question was Asked From
Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Hydrastar
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Kodiak Disc Brake Kit - 11" Rotor - 8 on 6-1/2 - E-Coat - Leaf Spring - 10K Dexter and Lippert
- Search Results: 25580
- Search Results: 14125a
- Shop: Dexter Oil Hub for 9K to 10K General Duty Axles - After April 2013 - Qty 1
- Shop: Dexter Trailer Idler Hub Assembly for 9,000-lb to 10,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Shop: Replacement Trailer Hub Bearing - 387A
- Shop: Kodiak Disc Brake Kit - 11.35" Rotor - #120 Spindle - 12K - ALKO
- Search Results: 008~430~03
- Shop: Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Search Results: k2r1058d11e
- Search Results: 2.72 grease cap
- Search Results: gs2250dl
- Search Results: castle nut
- Q&A: How To Switch From Electric Drum Brakes To EOH Disc Brakes For 10k General Duty Dexter Axles
- Q&A: How to Determine if Kodiak Disc Brake Kit Will Fit Dexter Axle 10K HD Axle
- Q&A: Switching My Electric Drum Brakes to Hydraulic Drum Brakes on Dexter 10k Axles
- Q&A: Disc Brake Kit to Fit Trailer with Trailer with 10k Axle Made Before 2009
- Q&A: Availability of Disk Brake Conversion Kit for Tandem 10,000 Pound Dexter Axles
- Q&A: What Spindle Does Kodiak Disc Brake Kit # K2R1058D11HD Fit
- Q&A: Inner Brake Drum Dimension of Dexter Drum 009-044-01 to Brake Dust Shield Mounting Flange
- Video: HydraStar Electric Over Hydraulic Actuator Kit Review
- Video: Hopkins Trailer Breakaway Kit - Kit with Charger - 20099 Review
- Video: Bulldog Winch Electric Winch BDW20080 Review
- Video: Kodiak Trailer Brakes - Disc Brakes - K2R1058D11HD Review
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-214-5UC1 Review
- Article: Adding Electric Over Hydraulic Disc Brakes
- Video: Electric Over Hydraulic Disc Brake Installation HBA16
- Video: Kodiak Trailer Brakes 20TA-BLKIT Review
- Shop: Brake Controller