Trailer Wiring Harness for a 1996 Nissan Pickup Truck

Question

Question:

I need one for a 1996 Nissan pickup. Will this one fit, or do you have one that will fit ?

asked by: Jeff B

0

Expert Reply:

Yes, we do have a T-connector style trailer wiring harness for the 1996 Nissan pickup. You will need to use # HM43505. I have included a link to the installation instructions for you.

expert reply by: Michael H

0

Answer 1

If you are replacing the White ground wire on your 7-way trailer connector you can use 12 gauge wire like part #12-1-1. This is Black wire but will work for replacing the White wire you said you have. For your 1993 Nissan pickup truck I recommend…

view full answer...

Answer 2

The Hopkins Vehicle Wiring Harness #HM43505 that you referenced is a confirmed fit for your 1995 Nissan Pickup and will work great to power trailer taillights that are either LED or incandescent.

view full answer...

Answer 3

If you have the Hopkins Wiring Harness #HM43505 installed on your 1997 Nissan pickup you will want to check the 4-flat connector with a circuit tester #PTW2993 and make sure that the wiring on the vehicle is correct and that you have a good ground.…

view full answer...

Answer 4

The Hopkins Tail Light Converter Kit with 4-Way Flat Connector - LED Compatible #HM48895 is designed to take separate trailer turn signal circuits and combine them so that the stop and turn signals are carried on the same wire.

view full answer...

Answer 5

The Hopkins 4-pole wiring harness made for your 1996 Nissan Pickup is kit #HM43505 which appears on the linked page along with similar item #C55353 from Curt. All of these wiring kits use custom-fit plugs for simple installation at the truck's…

view full answer...

Answer 6

With a 4-way flat trailer wiring harness like the #HM43505 which is a fit for your 1997 Nissan Pickup the only functions you get are the turn signals/stop lights and running light circuit. If there's an additional circuit needed like maybe a 12…

view full answer...

Answer 7

If you have the mid-year 1986.5 Nissan Hardbody that has the two large headlights rather than the four smaller lights on the older model, you can use the Hopkins Plug-in Simple Wiring Harness, part #HM43505, to install a 4-Way at the rear of your…

view full answer...

Answer 8

The Hopkins Vehicle Wiring Harness, #HM43505, is for the Nissan if it were towing a trailer and needed to power the trailer lights. Instead, there are a couple of different options for when you are towing the Nissan and need lights. Since you…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Trailer Wiring Harness for a 1996 Nissan Pickup Truck

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching