Lift Kit that Could Fit Dexter 3,500 lb Torsion Axle

Question

Question:

I want to lift my 2014 Scamp 16 RV with a 3500 lb torsion axle. Is the lift bracket number K71-707-01? Is there a 3 lift bracket available? thank you.

asked by: Leonard W

0

Expert Reply:

If your 2014 Scamp 16 has 3,500 lb Torsion Dexter axles then yes the lift kit part # K71-707-01 would be correct and it would provide a 2-5/8 inch lift. There isn't a taller version of this lift available. If you have a different brand axle let me know and I'll see if we have anything that would work.

expert reply by: Jameson C

0

Answer 1

For the Dexter Torflex torsion-type trailer axle on your Palomino pop-up the lift kits available are excluded from use due to the axles having top-mount brackets. These kits, as you noted, work only with side-mounted axles. We do not sell Torsion…

view full answer...

Answer 2

Your 225/75-15 tires have an overall diameter of 28.4 inches. If you have the vertical and lateral clearance within your wheel wells to move to a 16-inch tire size like 235/85-16, which is 31.6 inches overall diameter and 9.25 inches wide, then…

view full answer...

Answer 3

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub…

view full answer...

Answer 4

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 5

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 6

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 7

Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…

view full answer...

Answer 8

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 9

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 10

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 11

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 12

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Lift Kit that Could Fit Dexter 3,500 lb Torsion Axle

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching