Can Kuat Transfer 1 Bike Add-On be Used for 1-Bike or 2-Bike Transfer Rack

Question

Question:

On your QandA. For the TSAOB one answer as it can be used on the 2 or 1 bike transfer and on another it says it only works with the 1 bike transfer. Can you confirm which is correct.

asked by: Jeremy

0

Expert Reply:

The 1 Bike Add-On # TSAOB is designed for the V1 (version 1) of the Transfer 1-Bike rack.

The 1 Bike Add-On # KU57FR is designed for the V2 (version 2) of the Transfer 1-Bike, 2-Bike, and 3-Bike racks.

I think that is where you're seeing the conflicting information.

expert reply by: Jon G

0

Answer 1

The 1 Bike Add-On #KU57FR allows you to add an additional bike to the Kuat Transfer V2 Bike Racks 1-Bike #KU64FR, 2-Bike #KU84FR or 3-Bike #KU24FR racks. The 1-Bike Add-On TSAOB is for the previous V1 version of the Kuat Transfer. The mounting…

view full answer...

Answer 2

You can install the Curt hitch part #C13152 on a vehicle like your 2017 Hyundai Santa Fe without needing a jack or lift to raise the vehicle any higher. The vehicle has enough ground clearance to not require the added lift. We use a lift in our…

view full answer...

Answer 3

I have the perfect option for you, but to address your specific question the Kuat Transfer 1 Bike Add-On, #TSAOB, should not take you an hour to install, but it certainly wasn't designed for easy on/off use. There are a total of 7 allen…

view full answer...

Answer 4

For your application I really like the Kuat Transfer 1 Bike Rack #TS01B because of its versatility and ease of transport. As you mentioned the Kuat Transfer can be expanded to carry 2 bikes using the 1 Bike Add On #TSAOB down the line if needed but…

view full answer...

Answer 5

I wish we had the solution you are looking for but since your Transfer is the first generation model we don't have an add-on that works. The add-on part number you mentioned #KU57FR only fits the V2 models part #KU64FR. So if you were looking for…

view full answer...

Answer 6

This is actually a common issue but it is easily resolved. If the change key comes out but the lock cylinder does not, the first step is to make sure the lock is unlocked. Then insert the change key. You may need to put tension on the key by pushing…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...