Comparing Curt Trailer Hitch Receivers # C99FR and C45CR For a 2022 Toyota Highlander

Question

Question:

whats the difference between c99fr and the c45cr for 2022 highlander limited

asked by: Mike R

0

Expert Reply:

The main difference that you will see is the Curt Trailer Hitch Receiver # C45CR has a visible cross tube where the Curt Trailer Hitch Receiver # C99FR has a hidden cross tube. So when you have these mounted on your 2022 Toyota Highlander Limited you will either see just the receiver slot and chain loops that hangs down, or you will see the receiver and cross tube that attach to the mounting plates on the left and right frame rails. I have included images so that you can see the difference when they are mounted.

The Curt Trailer Hitch Receiver # C45CR will have a higher weight rating and will also allow the use of a weight distribution hitch. It is rated for 900lbs of tongue weight and a trailer up to 6,000lbs. With a weight distribution hitch trailer weight increases to 8,000lbs.

The Curt Trailer Hitch Receiver # C99FR is only rated for 500lbs of tongue weight and a total trailer weight of 5,000lbs. No matter which receiver you choose be sure to not exceed any weight capacities given for your specific Highlander.

Depending on what you will be using your Highlander for will decide which wiring harness you should consider.

The Tekonsha T-One Vehicle Wiring Harness # TK99FR is a 4-way flat connector. This is most common on smaller trailers that do not have electric trailer brakes or an on board battery that needs to be charged. It will also allow you to use Auxiliary Lights # C53201 with any hitch mounted accessory such as a bike rack that will impair the view of your tail lights for other drivers. The Mounting Bracket # C58001 will secure the 4-way connector to the end of either receiver for easy access.

The Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter # TK57VR will be needed for larger trailer that use electric trailer brakes that will require a Trailer Brake Controller # 90195. It can also charge batteries that may be used to power accessories on the trailer. The Mounting Bracket # C58000 will secure the 7-way connector to the end of either receiver for easy access.

expert reply by: Bud M

0

Curt Trailer Hitch Receiver # C99FR Installed View
(click to enlarge)

Curt Trailer Hitch Receiver # C45CR Installed View
(click to enlarge)

Answer 1

Typically, the wire colors are brown for running lights, green for right turn and brake lights, and yellow for left turn and brake lights. White is ground. To confirm this on a trailer you can trace the wires back to see where they terminate or…

view full answer...

Answer 2

Functionally speaking, there isn't a huge difference. The Curt #C56382 has a slightly lower capacity at 3 amps for circuit for stop/turn signals and 6 amps for taillights. The Tekonsha #118781 has a capacity of 5 amps per stop/turn circuit…

view full answer...

Answer 3

There is a trailer hitch that fits your 2020 Toyota Highlander, the Curt Trailer Hitch Receiver #C99FR. This is a bolt-on installation that does not require any drilling to install, and is mostly concealed so your Highlander keeps its OEM look. I…

view full answer...

Answer 4

To install the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector #C59236 you were looking at for your 2021 Toyota Highlander XLE I recommend removing the trim on the inside of the hatch and mounting the converter on the driver…

view full answer...

Answer 5

The Tekonsha T-One #118304 and Curt T-Connector #C55580 Vehicle Wiring Harnesses are very similar. These are both custom fit wiring harnesses that include a tail light converter, which is required for your 2007 Toyota Sienna because the brake and…

view full answer...

Answer 6

In regards to the Curt Trailer Hitch Receiver part #C45CR which is a fit for a 2022 Toyota Highlander, you'll remove a metal fascia tab from the passenger side frame rail to allow for installation of the hitch. It will not be reinstalled per the…

view full answer...

Answer 7

The Curt Trailer Hitch Receiver part #C99FR is a great option for a 2020 Toyota Highlander. It has a hidden crosstube design which is great for aesthetics but it also means you forgo some capacity and the ability to use a weight distribution system.…

view full answer...

Answer 8

There is fascia trimming required to install the EcoHitch part #EH35VR on your 2022 Toyota Highlander. You can see it in the attached install instructions.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Comparing Curt Trailer Hitch Receivers # C99FR and C45CR For a 2022 Toyota Highlander

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching