Curt Auxiliary LED Indicator Lights Review C53201 Video

Yes, it does. The Hollywood Racks LED Light Bar item #HLY54RR is wired for a 4-way but comes with an adapter that will plug into a 7-way like yours to power the lights.

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

The Hollywood Racks Destination part #HLY66ZR that you referenced was designed for E-bikes like your Aventon Pace 500 that doesn't have a top crosstube. The frame clamp is pretty flexible in how it can attach to bike frames like yours and what…

The Curt Auxiliary LED Indicator Lights part #C53201 would indeed need to be hardwired into the trailer lighting circuits if using a 7-way trailer connector as there is no tee and adapter combo I am aware of for this. It should just be a power and…

Thanks for reaching out! To add tail lights and a license plate to your Kuat NV 2.0 Bike Rack #NV22G I recommend picking up the Curt Auxiliary LED Indicator Lights #C53201 and the Thule License Plate Holder #TH35JV - you'll need to splice in the…

Easiest solution for that would be the Curt auxiliary LED indicator lights part #C53201. This would allow you to add stoplight/turn signals to your bike rack and it plugs into a 4-way like you mentioned.

Trailer tires like those found on your Travel Trailer should be aired up to the max pressure stamped on the sidewall of the tire. Since you mentioned it is stamped 80 PSI you will want to air them up to 80 PSI. Trailer tires are different than…

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this hitch. I…

Thank you for your purchase of the Kuat NV 2.0 Bike Rack #NV22G! When it comes to lighting I have an alternate solution to what you're asking with the following parts: Curt Auxiliary LED Indicator Lights - #C53201 Thule License Plate Holder for…

For your application I recommend the Light Kit #20174 and 2 of the Mounting Bracket #BK70BB. These will mount under the horizontal bars for the Hollywood Racks Sport Rider SE #HLY84FR. When it comes to the license plate bracket I'm not quite sure…

In regards to using the Curt Trailer Hitch Receiver part #C13397 on a 2023 Honda CR-V, you may still be able to use the hands free life gate feature but you would be limited to areas away from the receiver. That said, if you are unhappy with the…

The 3M adhesive backing on the Curt Auxiliary LED Indicator Lights #C53201 is a very strong adhesive that will last for a long time. It is important to have a smooth clean surface to attach the lights, otherwise they may not stay attached. While you…