Custom Fit Roof Rack Kit With Y00226 | Y00425 | Y53TR
(224 reviews)
Price: $688.80
In Stock
Custom Fit Roof Rack Kit With Y00226 | Y00425 | Y53TR
Item # Y74TB
Our Price: $688.80
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (224)
- Q & A (0)
- Videos (105)
- Photos
Yakima Roof Rack - Y74TB
- Crossbars
- Aero Bars
- 2 Bars
- 50 Inch Bar Space
- Yakima
- Black
- Overhang
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima 50" JetStream SM - Black:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit (sold separately) to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers (sold separately)
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Yakima Landing Pad 6 (Set of 2):
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with fiberglass roofs, like truck or camper shells
- Attach to roofs with bolts
- Include snap-on covers for protection when Towers are not in place
Yakima SkyLine Towers (4-pack) (w/new covers):
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads (sold separately) to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter (Y03536 - sold separately)
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000226 Landing Pad 6 for Yakima Control Towers for Fiberglass Roofs
8000425 Yakima Jet Stream Cross Bars - Aluminum - 50" Long - Qty 2 - Black
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Custom Fit Roof Rack Kit With Y00226 | Y00425 | Y53TR
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Crossbars SkyLine Towers Review
Hey everyone, it's Evangeline here at etrailer and today we'll be taking a look at our Yakima SkyLine towers. These are designed for your fixed mounting points, your flush rails, or your track systems. So if the roof of your vehicle looks like this, you probably need these. If you wanna carry around roof mounted accessories like kayaks or ladders or maybe you need to bring a Christmas tree home, you first need a roof rack system. Now this is gonna be the Yakima SkyLine towers for those vehicles that specifically require a custom fit kit for their fixed mounting points. Now if your vehicle does not look like this you might have a naked roof or raised rails.
That's why it's very important before anything to use our fit guide here at etrailer.com. Put your year, make model and then find the right fit for you. And if this is one of them let's take a look at how it works. Etrailer.com also helps you get the full kit for your vehicle because the skyline towers don't work alone you also need the appropriate crossbars as well as the correct fit kit or landing pads for you. But with this, you get a low profile roof rack so it doesn't stick too high up.
You get a heavy duty weight capacity since this is an aluminum roof rack. So usually they have 165 pounds capacity, depends on the vehicle, and you have this very sturdy but also very custom fit kit for your vehicle. That way, no matter what you put on it within reason and wherever you go, you know it's gonna stay there. But my favorite feature about this roof rack is the door design. So you pinch on the door to open it and that's it.
Just like that, you can lift the whole roof rack off of your roof. When you need to install it, you just pop it right back on. So the height of the tower is about 3 1/2" from your fixed mounting point to the top of the tower. The actual height can change depending on what crossbars you have and what rails you have, but compared to a lot of the other flush mounted crossbars and roof racks, it's just very low to the roof. Now with this style of a rack though, you are limited to the fixed mounting points or the flush rails of your vehicle.
So wherever they are, that's how much crossbar spread you get. For example, ours is set to 28" apart. On the other hand, if you have an aggressive tilt to your roof, you can actually adjust this up to six degrees forward or six degrees backward to help even out the playing field. Now I like to leave my roof rack on my vehicle and Yakima is pretty known for its durability. So the SkyLine towers are made of glass reinforced plastic, aluminum, stainless steel and elastomer. So all that is combined to help them stay strong even if you leave them on all day, all year. But if you do need to take off your roof rack you also have a feature to make it more low profile. Start by flipping both doors open and then you can lift the roof rack up and off of your roof. This way you can store it inside of your garage or in your house. You can leave your base on your roof rails. All you need to do is cover them with the included cover and that's it. You're done. The covered bases sit about 2" high up off of your fixed mounting point and makes for a much more low profile look. Your towers will have everything you need to install them which really is just one tool. And your fit kit has the hardware needed to undo the factory mounting points on your vehicle or for your track system if that's what you have. Now, that install process is extremely simple. Let's take a look at it. So these are what your towers look like when they are not on your roof. So they come all assembled in the box. All you need to do is get the appropriate landing pads for your vehicle. These landing pads can look different depending on your car and that's why it's very important to use our fit guide to get the right fit for you. You have four towers as well as the torque tool. And depending on your crossbars, you will also get a separate adapter to be used with those specific bars. With your landing pad kits, you'll get a part that fits your specific vehicle. You will get the hardware needed to install that part and you will have the base as well as the base cover. So if the towers are not on your vehicle you could just cover that base pad and take the cover off to install the tower. Here's an example of how the landing pad can be used depending on your cars. So you have a factory mounting point in this specific flush rail. So the pad goes over that hole and then you're gonna get your base which goes on top of that pad. And then you have a bolt with split washer and flat washer which is used to tighten down those two pieces to your car. The torque tool for your towers comes in handy whenever you're tightening down those bolts because it has a setting for tension. Once you get enough tension, it automatically clicks and prevents you from over tightening. Now to set up your tower for your crossbars there's different adaptor pieces. We're using the one for the JetStream crossbars. So we start by pushing in this plate into the tower. So you are gonna hear some clicks and that's how you know it's secure. Now we're gonna open up the tower door. So this involves pinching the door and pulling. Be careful because if you slide your fingers forward it doesn't feel as good. But with the door open, you can then loosen this bolt up front. It says to do it eight times. I just go until the bolt underneath is visible so you can see underneath what I mean. Notice how you have this little bolt head hiding around. You're gonna try to get at it with the tool. You can see how I do have access. That means as we flip this tower back over I can put this plate up top and then I can tighten down and thread onto that plate. With adapter and plate, this can now slide into your crossbar. For other adapters, they're designed to slide over or around your crossbar. With this specific style, I do recommend for the initial slide making sure that this is loose, but after that even if you have it fully tightened down you'll still be able to slowly adjust it on the crossbar. So with the towers on you're then ready to put this onto your roof. Now what I do is I just kind of roughly measure how far apart our landing pads are and that's when I can measure on the towers the distance apart they roughly need to be, in my case, 43 1/2. You could be off by 1/2" or so 'cause you can still move them. Also, supposedly this is when you put the rubber pieces inside of your crossbars. I do that after I've already installed them onto the roof. I take them back off and then I push them in so that I know exactly where the towers will be sitting. Make sure your towers are torqued down at their bottom bolt. Do that for both sides before installing. This is a lot easier with a friend on the other side but still doable with one person. So leave those doors open so that you can gently place them onto your roof. The bottom bracket with the door open fits onto your base so see how that just pushes into place. And then to secure it, just push that door close and you've got a sturdy fit. If you're using Yakima same key system lock cores, this is a time to switch them out on your towers. But other than that, just double check that all the towers are strong and secure and everything is sturdy. And that's it for the install of your roof rack. That right there was a look at the Yakima SkyLine towers for your Yakima crossbars for when you have vehicles that have fixed mounting points, flush rails or track systems.
Customer Reviews
Custom Fit Roof Rack Kit With Y00226 | Y00425 | Y53TR - Y74TB
Average Customer Rating: 4.8 out of 5 stars (224 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: Alvin04/17/2024
Super happy with my purchase from e trailers purchased yakima roof rack. Knowledgeable sales rep.Help me through the process on purchasing my roof rack Recommended to anyone quality parts
by: John11/16/2023
Mazda
For a 2015 Mazda 3, 4 door sedan.
I used the 50" jetstream bars with the skyline towers and the #22 Landing Pads.
Went together easy, great quality, very solid feeling! And, easy to remove and install when needed.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze.
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: Aidan08/19/2023
2012 Toyota Prius
Great bars and easy installation on my 2012 Prius C
by: Thomas 09/22/2023
Still look and work great after a year. Fantastic investment and they didn't reduce my fuel economy. They don't produce a lot of wind noise either.
by: Josh 04/15/2017
The yakima jetstream crossbar looks beautiful. Quality is great. Took my vehicle for a test drive, and i didnt hear anything loose or broken from the bars. Very satisfied with the product and the instructions were great. It was my first time installing a roof rack too.
by: Kevin 11/14/2023
not installed yet but everything was delivered on time and in good condition
by: Andrew07/17/2020
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. I love that there's a rubber piece in the top rail that doesn't need to be cut, which makes it a very flush and smooth fit. I also love the modularity and the weight that it can handle, especially for the stuff i plan on carrying.
by: Dan 11/06/2023
Great company. Fast delivery.
by: Steven 10/16/2023
Great product. Great service.
by: Porfirio10/26/2023
very informative and great work
by: Nicholas07/11/2023
Order was easy to place and delivered in less than a week as promised. The sales advice was perfect fit despite multiple pieces having been ordered. Used the rack once and very sturdy
by: Philip 05/29/2023
These really look so much better then the factory racks! Easy to install. Easy to order! Great product!
by: JB02/13/2022
The rack system seems very good, but time will tell, of course. The installation is difficult and time consuming. I purchased the system needed from etrailer website with guaranteed to fit pieces. I would call myself a very experienced do-it-yourselfer. I followed directions slowly, carefully, and exactly, yet there were problems. The video for installation given for my exact order did not match the printed and actual assembly and installation directions. The baseclips that were guaranteed for my model vehicle were actually for a different model vehicle according to the enclosed sheet ... however they did work anyway but caused some "looking up" and some confusion during assembly. I was careful to assemble exactly to measurements given ... and once that is all done and tightened and "sealed up" you put them on the roof, only to find that they could have been spaced a bit wider for a perfect fit. They are fine enough and we'll see if they stay tight to the vehicle. If not will need to take it all apart and widen the spacing.
It is excellent that basically only one tool that is provided with the racks is needed. And also that each part must "click" when properly tightened. That adds reassurance and satisfaction while assembling.
There are so many models of vehicles and it is not easy to figure all this out. etrailer has a very helpful website, response, and videos to help ... but my review is to emphasize that the instructions are not perfect. One needs lots of patience, common sense, and perhaps re-assembly for a perfect outcome.
by: Robert10/05/2018
These bars are outstanding. They were purchased for a Jeep grand cherokee '18. I had previously purchased from another brand, but the whistle noise was constant and very noticeable. These are completely quiet, I am glad I changed to the yakima bars. Installation was also much easier, and more "flush" mounting with the yakima brand. Glad to do business with etrailer!
by: William06/16/2021
The Yakima roof rack came in and was super easy to install. Appreciate the etrailer videos offering ways to install the racks.
by: Kp05/20/2021
End caps came off but love the bars. Get an extra set just in case. My Yakima cargo box is nice and safe attached to it.
by: Greg 06/12/2021
etrailer is great, from a great ordering process to quick delivery and great follow up. The Yakima Landing Pads are exactly as expected and are just what I needed for my truck cap. I have not installed them yet, but am sure that they will work perfectly. Thanks etrailer!
by: Robert05/21/2021
Great design for a roof rack system.easy to put on and take off. Use it to carry 9-11 foot surf fishing rods. Takes two minutes to put on when I am ready to go fishing.
by: Duane 05/17/2023
Without a doubt the highest quality rack I've ever dealt with. Fit and finish is superb.
25
645
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- How to Carry Bikes on a 2018 Volkswagen Golf Alltrack with a SunroofUsing the JetStream Crossbars # Y00425 along with the TimberLine Towers # Y33TR will be taller than using the Yakima RailBar Crossbars # Y00432-0433 for your 2018 Volkswagen Golf Alltrack but you do need to note that every roof rack manufacturer states that a sun or moon roof should not be used with a roof rack installed. Roof racks do have some wind noise which the aero style bars, although cause less noise, are not immune from. There is also the issue of clearance as well as possible...
view full answer... - Recommended Kayak Carrier for 2020 Mazda CX-5The only hitch mounted option wouldn't be an actual carrier, but a support like the Malone Axis # MAL32VR. This would require the installation of a trailer hitch like the # 76138 you looked at. More than likely you won't need this to mount your kayaks on your 2020 Mazda CX-5. Your kayaks will fit completely on a roof rack with a kayak carrier like the one seen in the picture below unless they are incredibly long. If that is the case, then by all means you could add the # MAL32VR to help...
view full answer...
- RetraxONE XR Compatible Ladder Rack and Roof Rack Accessory Recommended for 2020 Ford RangerThe # RTT-60335 RetraxONE XR hard tonneau cover you'd looked at would be a great choice for your 2019 Ford Ranger. For a ladder rack, I'd recommend the Yakima OverHaul HD, part # Y01151-58. You'll also need the adapter mount, part # Y01155 which allows the ladder rack to mount to the rails incorporated into the RetraxONE XR tonneau cover. Yakima tells me that the 68 inch crossbars included with this ladder rack are what's recommended for the Ranger pickup, and would be compatible with the...
view full answer... - Roof Rack Recommendation for 2020 Honda PilotThe rack you need will depend on how the roof of your 2020 Pilot is fitted out. I really like the Yakima JetStream roof rack, because of how well they're built and designed. They may not be the least expensive option, but they work very well and are extremely durable which makes them the most popular choice for your vehicle. If you have a bare roof, you'll need the following parts: • Yakima 60 inch JetStream crossbars, part # Y00426 • Yakima BaseLine roof rack towers, part # Y28TR •...
view full answer... - Recommended Roof Rack for 2020 Subaru Forester With Raised Rails for Rooftop TentThe roof rack I highly recommend for your 2020 Subaru Forester with raised rails that will allow you to carry any cargo and use your Yakima SkyRise HD Tent # Y07437 is a rack from Yakima, which consists of: - Yakima JetStream Crossbars # Y00425 (Black) - TimberLine Towers for Yakima Crossbars # Y33TR The accompanying photo shows this rack on a Subaru Forester so you can see how it will look when on yours. It has the needed capacity for your tent, and the bars are aerodynamic so you can...
view full answer...
- Roof Rack Recommendation for Raised Rails on a 2011 BMW 3 SeriesI have a way for you to use longer crossbars for a roof rack on your 2011 BMW 3 Series but since the Thule crossbars have a limiting slot on the underside we need to use a different brand roof rack system and for that I recommend Yakima as they're the only ones with a slot all the way through so you can literally fit any crossbar length. I'm only seeing from all of our manufacturers that a 2011 BMW 3 Series has raised rails so for that Yakima recommends the following parts (if you have...
view full answer... - How to Determine if Two Malone SeaWing Kayak Carriers Fit 2019 Subaru Outback Factory Roof RackYour kayaks will fit the Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD, but two of them will not fit your 2019 Subaru Outback's factory roof rack because the crossbars simply are not long enough for both the carriers and your 30" wide kayaks. So to use a kayak carrier you'll need an aftermarket roof rack, and the verified fit to replace the roof rack on your 2019 Outback is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00428...
view full answer... - Recommended Roof Rack for a Hullavator on a 2014 Ford Expedition w/ Raised Side RailsTo use the Thule Hullavator item # TH898 on your 2014 Ford Expedition you're going to need to install a set of crossbars that extend 4" - 8" past the roof racks legs. This allows the lift assist function of the Hullavator to work. Since your Expedition has the raised side rails, I recommend the Roof Rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 TimberLine Towers for Yakima Crossbars - Raised, Factory...
view full answer... - Snowboard Carrier Recommendation for a 2019 Honda AccordI really like the Kuat Grip Ski and Snowboard Carrier # GRR6B because it looks sleek and has a slide out feature that makes it easier to load your skis/boards. The Grip has a nice, low-profile build so it compliments your vehicle and there are angle adjustment bolts to make sure both parts of the carrier are level with each other so it's easy to install your skis/boards. This installs on a roof rack so if you don't already have one on your 2019 Honda Accord I recommend going with the Yakima...
view full answer... - Recommended Roof Rack Setup For Carrying A Tent On A 2013 Subaru Outback WagonYes, I would be happy to assist you and I know exactly what you need. The most economical setup that will also work for your vehicle is the Malone AirFlow 2 Aero Crossbars 58" # MPG216. This kit comes with everything you need and has a weight capacity of 165lbs. These bars also come with built-in locks.
view full answer... - Recommended Roof Rack For 2015 Nissan Altima With A SunroofWe do have a roof rack that's designed to fit your 2015 Altima and also work with your sunroof. I recommend the Yakima Jetstream roof rack. This rack is extremely quiet because it uses aerodynamic crossbars. The crossbars are 50 inches long and constructed of lightweight aluminum and have a black powder-coat finish. It is recommended not to open the sunroof when the roof rack is installed due to interference. To order this roof rack you will need part # Y00425, part # Y28TR, part #...
view full answer...
- Best Roof Rack for 2020 Kia Soul with Fixed Mounting PointsThe best roof rack for your 2020 Kia Soul with a naked roof (fixed mounting points) is from Yakima because it will give your Kia a roof rack that combines effectiveness and style while minimizing any wind noise that can occur with lesser roof racks. This roof rack is made up of: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This roof rack will look stellar atop your 2020 Kia...
view full answer... - Yakima Roof Rack for 2022 Subaru LegacyYou are on point with Yakima being a really high-quality product so I completely understand wanting to stick with them for a roof rack on your 2022 Subaru Legacy. The Yakima roof rack that fits your Legacy consists of the following parts: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 for Yakima Towers # Y00248 - Same Key System Lock Cores (Optional) # Y07204 I have added links to video reviews for you to check out as well.
view full answer... - Cross Bar Options And Kayak Carrier For A 2022 Hyundai SonataWe do have a couple of cross bar options for your 2022 Hyundai Sonata that will work great for you. -First we have the Yakima JetStream Crossbars # Y00425 with the BaseLine Towers for Yakima Crossbars # Y28TR, the fit kit # Y06180 & # Y06153. These are aerodynamic cross bars that measure 50" long, and have a maximum weight capacity of 165lbs. -Next, we have the Yakima CoreBar Crossbars # Y00421, with the same towers # Y00146, and fit kits # Y06153 & # Y06180. These cross bars share...
view full answer... - What Comes with the Annex for 2 Person Yakima SkyRise Tents # Y07421The Annex for 2 Person Yakima SkyRise Tents # Y07421 is just the enclosure that you see pictured beneath the Yakima SkyRise tent in the attached review video. This is a fit for the (discontinued) SkyRise Y07407 (Red) or SkyRise HD # Y07436 (Tan and Red). The SkyRise tents are compatible with your Crosstrek but you will need to use a different roof rack if the one you currently are using is the OEM roof rack according to Yakima. Roof rack systems where the crossbars end inside the legs...
view full answer... - Yakima Roof Rack that Fits 2024 Subaru Crosstrek with Raised Side RailsFor your 2024 Subaru Crosstrek has raised side rails you'd want the Jet Stream roof rack part numbers # Y00425 and # Y33TR.
view full answer... - Best Roof Rack for 2020 Mercedes-Benz GLB with Raised Side RailsThe best roof rack for your 2020 Mercedes-Benz GLB with the raised side rails is from Yakima because it will give your Mercedes a rack that is both quiet and strong while maintaining your Mercedes' distinguished look. The rack is made up of just a couple parts: - Yakima JetStream Crossbars # Y00425 - TimberLine Towers for Yakima Crossbars # Y33TR - Same Key System Lock Cores (Optional) # Y07204 The aerodynamic shape of the JetStream crossbars, along with their built-in WindRidges, ensure...
view full answer... - Quiet Roof Rack for 2023 Kia Sorento With Flush RailsFor an extremely quiet roof rack that fits the flush mounted rails on your 2023 Kia Sorento I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00425 -SightLine Towers for Yakima Crossbars # Y64AR -SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y77UR The JetStream bars use an asymmetrical shape making them very aerodynamic. This combined with the WindRidges built into the bars results in a dramatic reduction...
view full answer... - Parts Needed for Yakima JetStream Roof Rack on 2024 Mazda CX-5 With Flush RailsWe have exactly what you need to install the Yakima JetStream roof rack on your 2024 CX-5. You will need the following: -Yakima JetStream Crossbars # Y00425 -SightLine Towers for Yakima Crossbars # Y64AR -SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y39AR You also have the option of adding the Yakima SKS Lock Cores # Y07204 for added security. I have attached an installation video below for your reference.
view full answer... - 50 inch Aero Bar Roof Rack for 2021 Subaru CrosstrekWe actually have a 50 inch aero bar in black for your 2021 Subaru Crosstrek with the Yakima JetStream rack part numbers # Y00425, # Y00145, and # Y78FR which is very similar to the WingBar Evo setup with a track down the top of bars as well. I can't guarantee that either of the other setups would work as well since they are the recommended length by the manufacturer.
view full answer... - Recommended Quiet Crossbars For A 2018 Honda CR-V W/ A Naked RoofI went ahead and checked out the Yakima BaseLine and Skyline systems, and it does not appear that either of those are a fit for your 2018 Honda CR-V per Yakima. Instead, I recommend checking out the: -Yakima JetStream Crossbars # Y00425, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06188 & # Y06189. These crossbars measure 50" long x 2-3/4" wide x 1-1/8" tall, have a maximum weight capacity of 165-lbs, and is...
view full answer... - Roof Rack Recommendation for a 2013 Toyota Camry LEWe do carry options for you but this roof rack # SR1005 will not fit your 2013 Toyota Camry. For an option that does fit all you need is these two BaseClip kits # Y06119 and # Y06125. These will fit in your door jambs and then connect to these Baseline Towers # Y28TR and then the towers will connect to these crossbars # Y00425. That's all you need to get a roof rack onto your 2013 Toyota Corolla!
view full answer... - Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting PointsFor the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars. Both are great companies and there's a few differences that are important to note about the two companies. Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally, Rhino...
view full answer... - Solution for Roof Rack for 2017 Chrysler 300I do have a solution, but Inno has discontinued the fit kit for your 2017 Chrysler 300. Unfortunately, other fit kits will not allow you to install this roof rack on your vehicle. What I can offer instead is a Yakima roof rack like the CoreBar rack, which is similar to the # INXB108-115. You will need the following parts to complete the rack: -Yakima CoreBar Crossbars # Y00421 -BaseLine Towers # Y28TR -BaseClip Fit Kit # Y06110 The Yakima JetStream crossbars # Y00425 will work with...
view full answer... - Which Yakima Landing Pads for 2021 Toyota Highlander to Mount Skyline TowersTo use the Yakima Skyline Towers # Y53TR on your 2021 Toyota Highlander the correct landing pads are the Landing Pad 28 for Skyline and Control Towers # Y66VR.
view full answer... - Roof Rack Recommendation for 2020 Honda PilotThe rack you need will depend on how the roof of your 2020 Pilot is fitted out. I really like the Yakima JetStream roof rack, because of how well they're built and designed. They may not be the least expensive option, but they work very well and are extremely durable which makes them the most popular choice for your vehicle. If you have a bare roof, you'll need the following parts: • Yakima 60 inch JetStream crossbars, part # Y00426 • Yakima BaseLine roof rack towers, part # Y28TR •...
view full answer... - Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
view full answer... - How to Determine if Two Malone SeaWing Kayak Carriers Fit 2019 Subaru Outback Factory Roof RackYour kayaks will fit the Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD, but two of them will not fit your 2019 Subaru Outback's factory roof rack because the crossbars simply are not long enough for both the carriers and your 30" wide kayaks. So to use a kayak carrier you'll need an aftermarket roof rack, and the verified fit to replace the roof rack on your 2019 Outback is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00428...
view full answer... - What Roof Rack Can I Use with the Thule Hullavator on My 2022 Toyota Highlander with Flush Rails?I have a great solution for your flush rails on your 2022 Toyota Highlander to use the Hullavator # TH898. Yakima temporarily discontinued the Y00148 because they are updating the feet to fit a wider range of vehicles. Yakima has been changing a lot of fitments lately because of this factor. The landing pads # Y66VR are separate from the Y00148. However, with that being said, Yakima does have a roof rack system that fits your flush rails with a different model of feet. For that system,...
view full answer... - Best Roof Rack for 2020 Kia Soul with Fixed Mounting PointsThe best roof rack for your 2020 Kia Soul with a naked roof (fixed mounting points) is from Yakima because it will give your Kia a roof rack that combines effectiveness and style while minimizing any wind noise that can occur with lesser roof racks. This roof rack is made up of: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This roof rack will look stellar atop your 2020 Kia...
view full answer... - Yakima Roof Rack for 2022 Subaru LegacyYou are on point with Yakima being a really high-quality product so I completely understand wanting to stick with them for a roof rack on your 2022 Subaru Legacy. The Yakima roof rack that fits your Legacy consists of the following parts: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 for Yakima Towers # Y00248 - Same Key System Lock Cores (Optional) # Y07204 I have added links to video reviews for you to check out as well.
view full answer... - Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
view full answer... - Yakima Roof Rack Parts Needed for a 2017 Subaru Outback WagonYes, the recommended Yakima Landing pad for the 2017 Subaru Outback is the Landing Pad 15 part # Y00241 that you referenced. For crossbars you would want the part # Y00408, for towers part # Y53TR and adapters part # Y03536. All of these components would complete a roof rack for your vehicle.
view full answer... - 2010 Outback Roof Rack OptionsAdding feet to your 2010 Subaru Outback Wagon will not change the weight limit of the rack. The maximum weight limit will still be 165lbs. Adding the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 51" Long - Qty 2, part # RRRTS551, does not change that. In fact, adding an extra feet/legs and crossbars to your roof rack will actually lower the weight you can carry on your roof. That is because your roof rack's weight actually counts toward the 165lb weight total. I would use my existing...
view full answer... - Roof Rack that Can Fit 2023 Jeep Wrangler Rubicon with Sky One Touch RoofThe Yakima Jetstream roof rack part numbers # Y00428, # Y53TR, # Y00226 is a fit for your 2023 Jeep Wrangler Rubicon that has the sky one touch roof and would do a great job to carry a tent and other cargo.
view full answer... - Roof Rack & Attachments For 2010 Toyota Tacoma TRD SR5I would get the Yakima HD Bar Roof Rack System. You'll need the HD bars # Y01156 Skyline Towers # Y53TR HD bar adapter # Y03541 and landing pad # Y74FR. You can then use the JayLow Kayak Carrier # Y04073, Off-Grid Cargo Basket # Y07139 or Skybox Cargo Box # Y95AV. These are just my suggestions for accessories but there is much much more on our website if you're wanting something different!
view full answer... - Will the Rhino-Rack # Y01-130B Fit My 2022 Hyundai Santa Cruz?Yes, you will be able to put 2 bikes on the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells - Track Mount # Y01-130B if the combined weight of the racks and bikes is exactly 220 pounds (or under). As far as the fitment of the # Y01-130B on your 2022 Hyundai Santa Cruz, that is a bit more complicated. The tracks will fit with the included hardware with drilling. With the 63" tracks, you can cut the tracks to the size of the bed rails. The complicated part is the crossbar fitment....
view full answer... - Can Yakima LockNLoad Platform For 2017 Toyota Highlander XLE be Used with Roof TentThe Yakima LockNLoad Platform part # Y05045, # Y53TR, # Y05042-2, and # Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity instead and would be much higher. This is a creative solution to give you the additional spread you'd need for your tent too!
view full answer... - Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting PointsFor the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars. Both are great companies and there's a few differences that are important to note about the two companies. Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally, Rhino...
view full answer... - Parts To Use Existing Yakima Aero bars With RetraxONE For Toyota TacomaIt is possible to use your Yakima Aero bars on the RetraxONE part # RTT-60851 for the 2017 Toyota Tacoma. You need 2 sets of landing pads part # Y00221 to slide into the tracks of the Retrax system. You need one set (quantity of 4) of Yakima Skyline Towers part # Y53TR to attach to the landing pads. Then the Aero bars mount to the towers.
view full answer... - Roof Rack Recommendation for Rhino Rack Sunseeker II Awning on 2017 Ram ProMaster CitySince the Sunseeker II Awning Item # RR32105 only fits Rhino-Rack Heavy-Duty, Aero and Sportz crossbars; Thule and Inno square crossbars; Yakima round crossbars we have a solution, but it's not the Rola rack you mentioned. You'd want the Yakima Round Bar Rack part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which would fit and work well on your vehicle and with the Sunseeker. You will also need the adapter part # RR32105 too with the round bars.
view full answer... - How to Install Rhino-Rack Pioneer Platform Rack on a 2003 Hummer H2To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts: - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 4 # Y00224 This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed. The Pioneer Platform # RR85ZW...
view full answer... - Recommended Roof Rack for 2024 Toyota RAV4For an extremely quiet roof rack that fits your 2024 Toyota RAV4 with flush mounted rails I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 -SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR -Landing Pad 23 for Yakima SkyLine and Control Towers # Y98FR The JetStream bars use an asymmetrical design along with WindRidges to reduce drag, noise, and...
view full answer... - Recommend Roof Rack for a Bike and Kayak on a 2018 Honda CR-VIn order to add a roof rack to your 2018 Honda CR-V I recommend using the Yakima Roof Rack made of parts # Y01156, # Y53TR, # Y03541 and # Y00245. This system has heavy duty yet lightweight aluminum cross bars that are durable and rustproof. This option will also be far more cost effective than an OEM roof rack as I am sure you will come to find out. If you need a kayak carrier then I recommend the Rhino-Rack Nautic Roof Kayak Carrier part # RR570. It is side-loading and it comes with...
view full answer... - Length of Yakima Crossbars Needed to Load 2 Thule Hullavators # TH898 on a 2019 Honda PilotWhile we do technically have an option for mounting 2 Hullavators # TH898 onto your 2019 Honda Pilot with the Yakima SkyLine Towers # Y53TR and Landing Pad 19 # Y00245 on your flush rails, you would need at least 72" inches of usable crossbar space for the required 4-8 inches of length past the feet. This is because one Hullavator measures 36" long. The 70" JetStream crossbars # Y00427 does not provide enough length. With that being said, the only Yakima option we carry that has that length...
view full answer... - Can Thule Hullavator Install on Yakima CrossbarsThe Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
view full answer... - Is There A Trailer Hitch For 2023 Kia Soul GT Line With Center ExhaustIf you need to carry cargo with your Kia Soul, I do have a few potential solutions for you. I will tell you there is not a trailer hitch available anywhere that will fit the center exhaust model at this time (August 2023). The receiver would go exactly where the exhaust sits and there is no way to work around that. If your goal was to carry a few bikes we could set you up with a trunk mount bike rack like the Malone hanger # MPG2139. This can carry 3 bikes weighing up to 33 lbs apiece...
view full answer... - Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda PilotThank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
view full answer... - Roof Rack that Can Fit 2023 Jeep Wrangler Rubicon with Sky One Touch RoofThe Yakima Jetstream roof rack part numbers # Y00428, # Y53TR, # Y00226 is a fit for your 2023 Jeep Wrangler Rubicon that has the sky one touch roof and would do a great job to carry a tent and other cargo.
view full answer... - Roof Rack Recommendation for 2022 Jeep Wrangler Unlimited HardtopFor your 2022 Jeep Wrangler Unlimited hardtop the Yakima Jetstream roof rack part numbers # Y00425, # Y00148, and # Y00226 is a really great option. It's a very high quality rack that's easy to install, and quiet due to the aero bar shape.
view full answer... - Parts Needed to Use Yakima SkyLine Tower Setup from ARE Truck Camper on 1998 Jeep WranglerTo use your Yakima SkyLine setup on your 1998 Jeep Wrangler you just need the 42" Tracks # Y01126 and 2 sets of the Landing Pad 1 # Y00221. This will then allow you to easily transfer the SkyLine Towers # Y53TR and whatever crossbars you are currently using, like the 50" JetStream # Y00425. Just be sure that the crossbars from your ARE camper shell don't stick out further than the side mirrors on your Jeep. I have attached installation instructions for you to check out.
view full answer... - Recommended Roof Rack and Kayak Carrier for 2017 Jeep Wrangler Hard TopAbsolutely! For your 2017 Jeep Wrangler I recommend the Yakima JetStream Roof Rack System. This roof rack consists of a set of 50 inch JetStream Crossbars # Y00425 , the SkyLine Towers # Y53TR, and the Landing Pad 6 # Y00226. This will provide you with a great looking roof rack with lightweight aluminum bars that will cut through the wind for a nice, quiet ride. The system features a 165 pound weight capacity and because Yakima actually installs their racks onto vehicles before confirming...
view full answer... - Roof Rack for 2020 Jeep Wrangler Sahara for Carrying Ski RackFor your 2020 Jeep Wrangler Sahara that has the hard top the Yakima JetStream # Y00425, # Y53TR, and # Y00226 is a confirmed fit and would do a great job to carry a Thule ski rack. I attached an install video for this rack on a similar 2020 Wrangler for you to check out.
view full answer... - Hole Spacing on Yakima LandingPad 6 for Yakima Control Towers for Fiberglass RoofsI went out to the warehouse and pulled a Yakima LandPad 6, # Y00226. The distance on center between the two holes furthest apart is 3-11/16 inches. Six inches is not something you will be able to find. You can still install a roof rack like this but you will need to drill some holes in order to do so.
view full answer... - Roof Rack For 2-Door 2016 Jeep Wrangler With 3-Piece Hard TopSo there are two options for a roof rack for your 2016 Jeep Wrangler with a 3-piece hard top, and both are going to involve drilling into your roof so it will be a permanent application. One is from Rhino-Rack and the other from Yakima, with the difference being the Backbone support system from the Rhino-Rack being sturdier overall than the Yakima's simple footpads. So I'd go with the Rhino-Rack, but either system will work, and here are the needed parts for you: Yakima - Yakima JetStream...
view full answer... - Making a Roof Rack System for 2008 Pontiac Montana SV6 Without Raised RailsThe roof racks made for the 2008 Pontiac Montana SV6 were designed with raised rails in mind since most of the cars of this model came with raised rails. Since the Pontiac Montana was discontinued and had limited production from 2007-2009 its possible you have a different from usual version. If you can confirm that there are no rails up there or even holes or possible fixed mounting points, I have two more creative solutions. The first, is the SeaSucker Monkey Bars Roof Rack # 298-SX6000B....
view full answer... - Availability of Longer Crossbar Roof Rack that Fits 2014 Jeep WranglerWe have a 55 inch long crossbar roof rack that fits your 2014 Jeep Wrangler hard top with the Yakima rack part numbers # Y01156, # Y53TR, # Y03541, # Y00226 but Sportrack does not have a way to change the crossbar length of your current rack. If you preferred something a little easier on the ole wallet Yakima also has a round bar rack with the part # Y00409 and # Y00101 which is 58 inches long.
view full answer... - Yakima JetStream Roof Rack Crossbars Recommendation for 2019 Jeep Wrangler JLFor your 2019 Jeep Wrangler with a hard top the correct components needed to install the Yakima Jetstream roof rack is # Y00425, # Y53TR, and # Y00226. I checked with Yakima and they don't have any fit exclusions for the versions of your vehicle that have the sky roof so this would still fit with it but they recommend to always keep the roof closed with the rack installed. We have test fit this rack on a 2018 JL Wrangler Unlimited which I attached an install video for as well as a picture...
view full answer...
- Roof Rack Recommendation for 2019 Jeep Wrangler JL 2-Door Hard TopThere is a very good, high-quality roof rack for your 2-door 2019 Jeep Wrangler JL hardtop which consists of the following parts: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 6 for Yakima Control Towers for Fiberglass Roofs # # Y00226 This will give your '19 Wrangler a roof rack that is functional, durable, and quiet with a distinguished look. The aero shape of the JetStream bars, along with their built-in WindRidges, is what ensures...
view full answer... - Looking for Recommendations on How to Carry Tricycle on Top of Fiberglass Tonneau CoverI would start off by checking with the manufacturer of your fiberglass tonneau cover to see if they recommend carrying anything on top of the cover. Most tonneau covers are not designed for this purpose but if they give the approval, make sure that you ask them how much weight can safely be carried on top of the cover. We do not offer any type of rack for your large tricycle that would mount or hook on the edge of the fiberglass tonneau cover. The only rack/system that we offer would require...
view full answer... - Roof Rack for 2018 Jeep Wrangler JL Unlimited Hard Top to Carry Thule Hullavator Pro Kayak CarrierThere are a couple options for a roof rack on your 2018 Jeep Wrangler JL Unlimited with a hard top, from Yakima and Thule, with both allowing you to use the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898. The parts you need for the Yakima roof rack consist of: - Yakima JetStream Crossbars # Y00426 (Black) - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 6 # Y00226 The parts you need for the Thule roof rack consist of: - Thule WingBar Evo Crossbars...
view full answer... - How Wide of a Boat Can Be Used with the Yakima ShowDown Y04081The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs part # Y04081 can accommodate boats up to 28" wide with the kayak saddles and boats up to 36" wide with the paddle board saddles, both saddles are included. In order to secure your paddles you can use the Yakima TopGrip Paddle, Shovel, or Axe Holder Bracket part # Y04086. We also have an option to add locks, the Yakima Same Key System part # Y07202. For a roof rack that is a fit for your 2018 Jeep JL Wrangler Unlimited...
view full answer... - Roof Rack for 2018 Jeep Wrangler JL that Can Allow Thule Hullavator Carrier to InstallThe Yakima Jetstream roof rack part numbers # Y00425, # Y53TR, and # Y00226 that you referenced is a confirmed fit for your 2018 Jeep Wrangler JL and it by itself easily has capacity and bar length to carry two of the assisted Thule Hullavator roof racks part # TH898. You'll need to check to make sure the hardtop of your Jeep has the capacity for your two kayaks and the weight of each of the Hullavators as well which weighs right at 40 lbs.
view full answer... - 2022 Toyota RAV4 Roof Rack Recommendation for Naked RoofThe rubber base that comes with the Landing Pad 6 for Yakima SkyLine and Control Towers for Fiberglass Roofs # Y00226 measures 5.78" long x 1.74" wide. I'm not sure if this will fit inside the space you're showing but you should be able to determine if this will work for your 2022 Toyota RAV4. For a completely custom-fit roof rack I recommend going with the Vortex roof rack from Rhino-Rack: 49" Vortex Aero Crossbars - # RRVA126B-2 2500 Series Legs - # RRRLKVA DK Fit Kit - # RR27QP This...
view full answer...
- Will the Gutter Mounts # RL150S13-3 Attach to a Rhino-Rack Pioneer Platform?I went ahead and reached out to my contact at Rhino-Rack, and she confirmed that the Rhino-Rack Roof Rack Legs - Gutter Mount - 5-15/16" Tall # RL150S13-3 will technically attach to a Rhino-Rack Pioneer platform. However, Pioneer Platforms are customized to fit certain roof dimensions, and I cannot recommend which platform you will need for your vehicle. In order to give you the proper fitment and recommendation, please feel free to respond to this answer with the year/make/model/roof...
view full answer... - Roof Rack that Can Fit 2023 Jeep Wrangler Rubicon with Sky One Touch RoofThe Yakima Jetstream roof rack part numbers # Y00428, # Y53TR, # Y00226 is a fit for your 2023 Jeep Wrangler Rubicon that has the sky one touch roof and would do a great job to carry a tent and other cargo.
view full answer... - Roof Rack Recommendation for 2022 Jeep Wrangler Unlimited HardtopFor your 2022 Jeep Wrangler Unlimited hardtop the Yakima Jetstream roof rack part numbers # Y00425, # Y00148, and # Y00226 is a really great option. It's a very high quality rack that's easy to install, and quiet due to the aero bar shape.
view full answer... - Parts Needed to Use Yakima SkyLine Tower Setup from ARE Truck Camper on 1998 Jeep WranglerTo use your Yakima SkyLine setup on your 1998 Jeep Wrangler you just need the 42" Tracks # Y01126 and 2 sets of the Landing Pad 1 # Y00221. This will then allow you to easily transfer the SkyLine Towers # Y53TR and whatever crossbars you are currently using, like the 50" JetStream # Y00425. Just be sure that the crossbars from your ARE camper shell don't stick out further than the side mirrors on your Jeep. I have attached installation instructions for you to check out.
view full answer... - Recommended Roof Rack and Kayak Carrier for 2017 Jeep Wrangler Hard TopAbsolutely! For your 2017 Jeep Wrangler I recommend the Yakima JetStream Roof Rack System. This roof rack consists of a set of 50 inch JetStream Crossbars # Y00425 , the SkyLine Towers # Y53TR, and the Landing Pad 6 # Y00226. This will provide you with a great looking roof rack with lightweight aluminum bars that will cut through the wind for a nice, quiet ride. The system features a 165 pound weight capacity and because Yakima actually installs their racks onto vehicles before confirming...
view full answer... - Roof Rack for 2020 Jeep Wrangler Sahara for Carrying Ski RackFor your 2020 Jeep Wrangler Sahara that has the hard top the Yakima JetStream # Y00425, # Y53TR, and # Y00226 is a confirmed fit and would do a great job to carry a Thule ski rack. I attached an install video for this rack on a similar 2020 Wrangler for you to check out.
view full answer... - Hole Spacing on Yakima LandingPad 6 for Yakima Control Towers for Fiberglass RoofsI went out to the warehouse and pulled a Yakima LandPad 6, # Y00226. The distance on center between the two holes furthest apart is 3-11/16 inches. Six inches is not something you will be able to find. You can still install a roof rack like this but you will need to drill some holes in order to do so.
view full answer... - Roof Rack For 2-Door 2016 Jeep Wrangler With 3-Piece Hard TopSo there are two options for a roof rack for your 2016 Jeep Wrangler with a 3-piece hard top, and both are going to involve drilling into your roof so it will be a permanent application. One is from Rhino-Rack and the other from Yakima, with the difference being the Backbone support system from the Rhino-Rack being sturdier overall than the Yakima's simple footpads. So I'd go with the Rhino-Rack, but either system will work, and here are the needed parts for you: Yakima - Yakima JetStream...
view full answer... - Making a Roof Rack System for 2008 Pontiac Montana SV6 Without Raised RailsThe roof racks made for the 2008 Pontiac Montana SV6 were designed with raised rails in mind since most of the cars of this model came with raised rails. Since the Pontiac Montana was discontinued and had limited production from 2007-2009 its possible you have a different from usual version. If you can confirm that there are no rails up there or even holes or possible fixed mounting points, I have two more creative solutions. The first, is the SeaSucker Monkey Bars Roof Rack # 298-SX6000B....
view full answer... - Availability of Longer Crossbar Roof Rack that Fits 2014 Jeep WranglerWe have a 55 inch long crossbar roof rack that fits your 2014 Jeep Wrangler hard top with the Yakima rack part numbers # Y01156, # Y53TR, # Y03541, # Y00226 but Sportrack does not have a way to change the crossbar length of your current rack. If you preferred something a little easier on the ole wallet Yakima also has a round bar rack with the part # Y00409 and # Y00101 which is 58 inches long.
view full answer... - Yakima JetStream Roof Rack Crossbars Recommendation for 2019 Jeep Wrangler JLFor your 2019 Jeep Wrangler with a hard top the correct components needed to install the Yakima Jetstream roof rack is # Y00425, # Y53TR, and # Y00226. I checked with Yakima and they don't have any fit exclusions for the versions of your vehicle that have the sky roof so this would still fit with it but they recommend to always keep the roof closed with the rack installed. We have test fit this rack on a 2018 JL Wrangler Unlimited which I attached an install video for as well as a picture...
view full answer... - Roof Rack Recommendation for 2019 Jeep Wrangler JL 2-Door Hard TopThere is a very good, high-quality roof rack for your 2-door 2019 Jeep Wrangler JL hardtop which consists of the following parts: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 6 for Yakima Control Towers for Fiberglass Roofs # # Y00226 This will give your '19 Wrangler a roof rack that is functional, durable, and quiet with a distinguished look. The aero shape of the JetStream bars, along with their built-in WindRidges, is what ensures...
view full answer... - Looking for Recommendations on How to Carry Tricycle on Top of Fiberglass Tonneau CoverI would start off by checking with the manufacturer of your fiberglass tonneau cover to see if they recommend carrying anything on top of the cover. Most tonneau covers are not designed for this purpose but if they give the approval, make sure that you ask them how much weight can safely be carried on top of the cover. We do not offer any type of rack for your large tricycle that would mount or hook on the edge of the fiberglass tonneau cover. The only rack/system that we offer would require...
view full answer... - Roof Rack for 2018 Jeep Wrangler JL Unlimited Hard Top to Carry Thule Hullavator Pro Kayak CarrierThere are a couple options for a roof rack on your 2018 Jeep Wrangler JL Unlimited with a hard top, from Yakima and Thule, with both allowing you to use the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898. The parts you need for the Yakima roof rack consist of: - Yakima JetStream Crossbars # Y00426 (Black) - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 6 # Y00226 The parts you need for the Thule roof rack consist of: - Thule WingBar Evo Crossbars...
view full answer... - How Wide of a Boat Can Be Used with the Yakima ShowDown Y04081The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs part # Y04081 can accommodate boats up to 28" wide with the kayak saddles and boats up to 36" wide with the paddle board saddles, both saddles are included. In order to secure your paddles you can use the Yakima TopGrip Paddle, Shovel, or Axe Holder Bracket part # Y04086. We also have an option to add locks, the Yakima Same Key System part # Y07202. For a roof rack that is a fit for your 2018 Jeep JL Wrangler Unlimited...
view full answer... - Roof Rack for 2018 Jeep Wrangler JL that Can Allow Thule Hullavator Carrier to InstallThe Yakima Jetstream roof rack part numbers # Y00425, # Y53TR, and # Y00226 that you referenced is a confirmed fit for your 2018 Jeep Wrangler JL and it by itself easily has capacity and bar length to carry two of the assisted Thule Hullavator roof racks part # TH898. You'll need to check to make sure the hardtop of your Jeep has the capacity for your two kayaks and the weight of each of the Hullavators as well which weighs right at 40 lbs.
view full answer... - 2022 Toyota RAV4 Roof Rack Recommendation for Naked RoofThe rubber base that comes with the Landing Pad 6 for Yakima SkyLine and Control Towers for Fiberglass Roofs # Y00226 measures 5.78" long x 1.74" wide. I'm not sure if this will fit inside the space you're showing but you should be able to determine if this will work for your 2022 Toyota RAV4. For a completely custom-fit roof rack I recommend going with the Vortex roof rack from Rhino-Rack: 49" Vortex Aero Crossbars - # RRVA126B-2 2500 Series Legs - # RRRLKVA DK Fit Kit - # RR27QP This...
view full answer... - Will the Gutter Mounts # RL150S13-3 Attach to a Rhino-Rack Pioneer Platform?I went ahead and reached out to my contact at Rhino-Rack, and she confirmed that the Rhino-Rack Roof Rack Legs - Gutter Mount - 5-15/16" Tall # RL150S13-3 will technically attach to a Rhino-Rack Pioneer platform. However, Pioneer Platforms are customized to fit certain roof dimensions, and I cannot recommend which platform you will need for your vehicle. In order to give you the proper fitment and recommendation, please feel free to respond to this answer with the year/make/model/roof...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.