Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2
(229 reviews)
Price: $688.85
In Stock
Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2
Item # Y97TB
Our Price: $688.85
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (229)
- Q & A (0)
- Videos (104)
- Photos
Yakima Roof Rack - Y97TB
- Aero Bars
- Crossbars
- 50 Inch Bar Space
- Yakima
- Black
- Overhang
- 2 Bars
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 50" Long - Black - Qty 2:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Yakima Landing Pad 15 Fit Kit:
- Mounts in place of your vehicle's factory crossbars to provide attachment points for a Yakima roof rack
- Pair with Yakima SkyLine and Control Towers and crossbars to create a complete roof rack
- Bolts to the factory crossbar mounting points on your side rails with included hardware
- Corner-specific pads are labeled for easy installation
- Includes snap-on covers to protect the pads when towers are not in place
Yakima SkyLine Towers - Qty 4:
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000241 Landing Pad 15 for Yakima Control Towers - Qty 4
8000425 Yakima Jet Stream Cross Bars - Aluminum - 50" Long - Qty 2 - Black
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Crossbars SkyLine Towers Review
Hey everyone, it's Evangeline here at etrailer and today we'll be taking a look at our Yakima SkyLine towers. These are designed for your fixed mounting points, your flush rails, or your track systems. So if the roof of your vehicle looks like this, you probably need these. If you wanna carry around roof mounted accessories like kayaks or ladders or maybe you need to bring a Christmas tree home, you first need a roof rack system. Now this is gonna be the Yakima SkyLine towers for those vehicles that specifically require a custom fit kit for their fixed mounting points. Now if your vehicle does not look like this you might have a naked roof or raised rails.
That's why it's very important before anything to use our fit guide here at etrailer.com. Put your year, make model and then find the right fit for you. And if this is one of them let's take a look at how it works. Etrailer.com also helps you get the full kit for your vehicle because the skyline towers don't work alone you also need the appropriate crossbars as well as the correct fit kit or landing pads for you. But with this, you get a low profile roof rack so it doesn't stick too high up.
You get a heavy duty weight capacity since this is an aluminum roof rack. So usually they have 165 pounds capacity, depends on the vehicle, and you have this very sturdy but also very custom fit kit for your vehicle. That way, no matter what you put on it within reason and wherever you go, you know it's gonna stay there. But my favorite feature about this roof rack is the door design. So you pinch on the door to open it and that's it.
Just like that, you can lift the whole roof rack off of your roof. When you need to install it, you just pop it right back on. So the height of the tower is about 3 1/2" from your fixed mounting point to the top of the tower. The actual height can change depending on what crossbars you have and what rails you have, but compared to a lot of the other flush mounted crossbars and roof racks, it's just very low to the roof. Now with this style of a rack though, you are limited to the fixed mounting points or the flush rails of your vehicle.
So wherever they are, that's how much crossbar spread you get. For example, ours is set to 28" apart. On the other hand, if you have an aggressive tilt to your roof, you can actually adjust this up to six degrees forward or six degrees backward to help even out the playing field. Now I like to leave my roof rack on my vehicle and Yakima is pretty known for its durability. So the SkyLine towers are made of glass reinforced plastic, aluminum, stainless steel and elastomer. So all that is combined to help them stay strong even if you leave them on all day, all year. But if you do need to take off your roof rack you also have a feature to make it more low profile. Start by flipping both doors open and then you can lift the roof rack up and off of your roof. This way you can store it inside of your garage or in your house. You can leave your base on your roof rails. All you need to do is cover them with the included cover and that's it. You're done. The covered bases sit about 2" high up off of your fixed mounting point and makes for a much more low profile look. Your towers will have everything you need to install them which really is just one tool. And your fit kit has the hardware needed to undo the factory mounting points on your vehicle or for your track system if that's what you have. Now, that install process is extremely simple. Let's take a look at it. So these are what your towers look like when they are not on your roof. So they come all assembled in the box. All you need to do is get the appropriate landing pads for your vehicle. These landing pads can look different depending on your car and that's why it's very important to use our fit guide to get the right fit for you. You have four towers as well as the torque tool. And depending on your crossbars, you will also get a separate adapter to be used with those specific bars. With your landing pad kits, you'll get a part that fits your specific vehicle. You will get the hardware needed to install that part and you will have the base as well as the base cover. So if the towers are not on your vehicle you could just cover that base pad and take the cover off to install the tower. Here's an example of how the landing pad can be used depending on your cars. So you have a factory mounting point in this specific flush rail. So the pad goes over that hole and then you're gonna get your base which goes on top of that pad. And then you have a bolt with split washer and flat washer which is used to tighten down those two pieces to your car. The torque tool for your towers comes in handy whenever you're tightening down those bolts because it has a setting for tension. Once you get enough tension, it automatically clicks and prevents you from over tightening. Now to set up your tower for your crossbars there's different adaptor pieces. We're using the one for the JetStream crossbars. So we start by pushing in this plate into the tower. So you are gonna hear some clicks and that's how you know it's secure. Now we're gonna open up the tower door. So this involves pinching the door and pulling. Be careful because if you slide your fingers forward it doesn't feel as good. But with the door open, you can then loosen this bolt up front. It says to do it eight times. I just go until the bolt underneath is visible so you can see underneath what I mean. Notice how you have this little bolt head hiding around. You're gonna try to get at it with the tool. You can see how I do have access. That means as we flip this tower back over I can put this plate up top and then I can tighten down and thread onto that plate. With adapter and plate, this can now slide into your crossbar. For other adapters, they're designed to slide over or around your crossbar. With this specific style, I do recommend for the initial slide making sure that this is loose, but after that even if you have it fully tightened down you'll still be able to slowly adjust it on the crossbar. So with the towers on you're then ready to put this onto your roof. Now what I do is I just kind of roughly measure how far apart our landing pads are and that's when I can measure on the towers the distance apart they roughly need to be, in my case, 43 1/2. You could be off by 1/2" or so 'cause you can still move them. Also, supposedly this is when you put the rubber pieces inside of your crossbars. I do that after I've already installed them onto the roof. I take them back off and then I push them in so that I know exactly where the towers will be sitting. Make sure your towers are torqued down at their bottom bolt. Do that for both sides before installing. This is a lot easier with a friend on the other side but still doable with one person. So leave those doors open so that you can gently place them onto your roof. The bottom bracket with the door open fits onto your base so see how that just pushes into place. And then to secure it, just push that door close and you've got a sturdy fit. If you're using Yakima same key system lock cores, this is a time to switch them out on your towers. But other than that, just double check that all the towers are strong and secure and everything is sturdy. And that's it for the install of your roof rack. That right there was a look at the Yakima SkyLine towers for your Yakima crossbars for when you have vehicles that have fixed mounting points, flush rails or track systems.
Customer Reviews
Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2 - Y97TB
Average Customer Rating: 4.8 out of 5 stars (229 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: Alvin04/17/2024
Super happy with my purchase from e trailers purchased yakima roof rack. Knowledgeable sales rep.Help me through the process on purchasing my roof rack Recommended to anyone quality parts
by: John11/16/2023
Mazda
For a 2015 Mazda 3, 4 door sedan.
I used the 50" jetstream bars with the skyline towers and the #22 Landing Pads.
Went together easy, great quality, very solid feeling! And, easy to remove and install when needed.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze.
by: Thomas 09/22/2023
Still look and work great after a year. Fantastic investment and they didn't reduce my fuel economy. They don't produce a lot of wind noise either.
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Philip05/29/2023
2016 Subaru Outback Wagon
Fit my 2016 Subaru Outback perfectly!
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: Aidan08/19/2023
2012 Toyota Prius
Great bars and easy installation on my 2012 Prius C
by: Vannack01/04/2020
I chose Yakima because I had one in the past and they were always reliable. Thule was my next choice but didn’t like the look of 53’ crossbars on my car. I really appreciated the easy to follow instruction that made installation a breeze. The kit came complete with everything I needed to install right out of the box. I purchased the 2 Hightower bike racks to go with the roof rack system and plan to safely secure both bikes for our trips. It was a bit heavier than I anticipated (combined with the bike carriers) which will hurt my MPG but having easy access to disassemble the bike carriers when not in use made it a no brained. Additionally, I love the look of the system on my car.
by: Michael01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: Josh 04/15/2017
The yakima jetstream crossbar looks beautiful. Quality is great. Took my vehicle for a test drive, and i didnt hear anything loose or broken from the bars. Very satisfied with the product and the instructions were great. It was my first time installing a roof rack too.
by: Andrew07/17/2020
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. I love that there's a rubber piece in the top rail that doesn't need to be cut, which makes it a very flush and smooth fit. I also love the modularity and the weight that it can handle, especially for the stuff i plan on carrying.
by: Oliver05/30/2021
BMW
Lightweight and actually quite quiet with no attachments on them. With my bike racks there is a fair amount of noise but it doesn't come from just these. Mine is on a 2011 BMW 335.
by: Kevin 11/14/2023
not installed yet but everything was delivered on time and in good condition
by: Dan 11/06/2023
Great company. Fast delivery.
by: Steven 10/16/2023
Great product. Great service.
by: Porfirio10/26/2023
very informative and great work
by: Barry09/29/2022
the product was exceptional. I would recommend it to anyone, who has a vehicle with a naked roof. It is a solid as a factory installed rack. Josh went out of his way to get me a replacement torque screw driver because the first one from Yakima was working properly.
by: Ernesto07/23/2022
Nissan Rogue
Well you asked for it so;
I ordered this as part of my roof rack for a 2021 Nissan rogue. The complete roof rack set was unavailable le as one bracket was on back order and said would ship in under a month so I ordered everything else in the meantime. Little did I know it would take a over a year to get one stupid bracket and yes, I'm still waiting. I can't even return the items I bought because it's way past the 90 day policy even though they're brand new still in the box collecting dust. etrailer, this has been the worst experience I've had yet with you guys. Oh still waiting for my one bracket to complete my roof rack
by: Jean 02/02/2021
Yes, The Yakima roof rack has been working flawlessly. I did have one issue where one of the landing pad covers flew off that I had to replace. I understand parts wear and plastic gets brittle and/or shrinks with time in the sun, but that shouldn't have happened so soon. Other than that, we bought a Thule Motion XT box to use for long travels.
by: Nicholas07/11/2023
Order was easy to place and delivered in less than a week as promised. The sales advice was perfect fit despite multiple pieces having been ordered. Used the rack once and very sturdy
by: Roger03/24/2020
robert s was terrific !!! excellent customer service !!! from assisting with a return, to recommending an alternative, to informing me about delivery status ...
the yakima jetstream crossbars with baseline towers were a bit more complicated to assemble and install than the brand i returned, but the wind noise and whistling are dramatically less ...
the next step is to select a cargo carrier ... it goes without saying that i will consult robert again ... thanks so much robert, and safe and happy travels to all
by: JB02/13/2022
The rack system seems very good, but time will tell, of course. The installation is difficult and time consuming. I purchased the system needed from etrailer website with guaranteed to fit pieces. I would call myself a very experienced do-it-yourselfer. I followed directions slowly, carefully, and exactly, yet there were problems. The video for installation given for my exact order did not match the printed and actual assembly and installation directions. The baseclips that were guaranteed for my model vehicle were actually for a different model vehicle according to the enclosed sheet ... however they did work anyway but caused some "looking up" and some confusion during assembly. I was careful to assemble exactly to measurements given ... and once that is all done and tightened and "sealed up" you put them on the roof, only to find that they could have been spaced a bit wider for a perfect fit. They are fine enough and we'll see if they stay tight to the vehicle. If not will need to take it all apart and widen the spacing.
It is excellent that basically only one tool that is provided with the racks is needed. And also that each part must "click" when properly tightened. That adds reassurance and satisfaction while assembling.
There are so many models of vehicles and it is not easy to figure all this out. etrailer has a very helpful website, response, and videos to help ... but my review is to emphasize that the instructions are not perfect. One needs lots of patience, common sense, and perhaps re-assembly for a perfect outcome.
25
649
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Long Crossbar Roof Rack for 2017 Honda HR-V to Install Thule Hullavator Assisted Kayak CarrierThe Thule Hullavator part # TH898 can fit aftermarket roof racks like the Rhino Rack you have but the bars of the rack have to stick out past the feet of the rack 4 to 8 inches. If you need a longer crossbar roof rack the longest option we have is the Yakima JetStream bars # Y00425, # Y00145 and # Y06023 which will give you 60 inch long crossbars. To add locks you'd need just the part # Y07204.
view full answer... - Do Locks of Yakima Skyline Towers Lock Fit Kit to Vehicle As WellThe locks on the Skyline towers of the Yakima Jetstream roof rack that fits your 2022 Chevy Bolt EUV part numbers # Y00425, # Y53TR, and # Y00245 end up locking the bars to the feet, the feet to the landing pad and therefore the landing pad to the vehicle since you have to remove the feet before you can access the fit kit.
view full answer... - Fit Kit and Towers for Yakima Crossbars on a 2016 Toyota Prius PrimeYakima does not utilize the Q Clips and Towers for the 2016 Toyota Prius Prime. Instead, they utilize the BaseClips, part # Y06169 and # Y06123, for the BaseLine Towers, part # Y28TR. You can see a combination of these parts with some JetStream Crossbars, part # Y00425, at the link below. If you already have Yakima crossbars, then the is no worry as the BaseLine Towers are designed to work with Yakima's entire range of crossbars.
view full answer... - Which Rhino-Rack Pioneer Platform for 2018 Subaru Outback WagonThe Rhino Rack 58" x 47 " Pioneer Platform # RR42115BF is a confirmed fit per Rhino Rack for your 2018 Subaru Outback Wagon but I think you would have issues mounting this. We have not had the opportunity to test this out ourselves to confirm. With this being wider than the cross bars the outside mounting location is too wide for your crossbars. The center of the outside mounting location is 3-5/8" from the outside of the platform. You would not clear the side rails that your crossbars...
view full answer... - Will the Thule Motion XT Fit on the Yakima JetStream Crossbars on a 2021 Kia SoulThe Yakima JetStream Bars, part # Y00425, are 3-1/8" wide x 1" tall. The Thule Motion XT Rooftop Cargo Box, part # TH629706, has a maximum fit of 3-1/2" wide x 1-11/16". So, this cargo box will definitely fit around the crossbars. The only thing you have to ensure is that the distance from the center of one crossbar to the center of the other is between 23-5/8" and 36-7/8". I've linked to a video review of the Motion XT below.
view full answer... - How to Outfit the Yakima OffGrid Roof Cargo Basket on a 2019 Toyota 4RunnerThe Yakima OffGrid Roof Cargo Basket, part # Y07138, is designed to fit on crossbars. So, your 2019 Toyota 4Runner will need a roof rack in order to mount the basket. If you have raised rails, then I recommend the Yakima JetStream Crossbars, part # Y00425. They are aero-style bars that attach to the rails using the TimberLine Towers, part # Y33TR. I've linked to a video installation of this setup below. If you do not have flush rails, then the only thing you can use is the Rhino-Rack...
view full answer... - Bike Rack Recommendation for 2020 Genesis G70 with 2 Carbon Fiber BikesThe trunk mount bike rack options for a 2020 Genesis G70 are all hanging style racks and while these will technically get the job done, since you have carbon fiber bikes you want to avoid using a bike rack that will be in contact with your bike frames. Normally I would say go with a trailer hitch and a hitch mount bike rack because they are more cost-effective and easier to use, but there are no trailer hitches that fit your 2020 Genesis G70 so you'll want to go with a roof rack and a...
view full answer... - Roof Rack Recommendation For Transporting A Bike While Being Flat TowedFor your 2020 Jeep Cherokee, we do have a few options for you. If you want to use a roof rack mounted bike rack you'll need the cross bars # Y00425 and you'll need the towers # Y00146, as well as the fit kit # Y06123 and # Y06159. From here, you can use a roof mounted bike rack like the Yakima HighRoad Roof Bike Rack # Y02114 which can carry 1 bike weighing up to 45-lbs. I suggest referring to your owner's manual for your roof's maximum carrying capacity so you don't potentially overload...
view full answer... - Low Profile Roof Rack and Cargo Box to Carry Skis on a 2018 Subaru Outback WagonI went out to our warehouse to measure a lot of the kits available to you. Since the sizing is standardized and your 2018 Subaru Outback Wagon has fixed mounting points, you can predict the size of the rack overall pretty easily. The lowest profile kit is the Yakima JetStream, standing at 4-1/2 inches tall. You will need the same mounting kit regardless of what length bar, which consists of: - Yakima SkyLine Towers, part # Y53TR - Yakima LandingPad 15, part # Y00241 What's nice is...
view full answer... - Will the Rhino-Rack Batwing Compact Awning Work With Yakima CoreBar CrossbarsIn order to use the Rhino-Rack Batwing Compact Awning part # RR33400 you must switch from the Yakima CoreBar Crossbars part # Y00421 to the Yakima JetStream Crossbars part # Y00425. The Yakima JetStream Crossbars will work with your TimberLine Towers for Yakima Crossbars part # Y33TR so no worries here. The reason you must switch is that the Batwing mounts inside a crossbar channel which the CoreBar does not have but the JetStream does and will work with your setup so you are in luck. The...
view full answer... - Can I Use the Rhino-Rack Vortex with the Yakima BigCatch Kayak Saddle on a 2019 VW Golf 5 DrI'll try to tackle these in the order you asked them: 1) No, the # RRRS605B will not mount where the plastic tab is and will instead mount 7-7/8" towards the front of the vehicle from the line where the front and rear door meet- the # RRRS605B will clamp into the door jams on your 2019 VW Golf 5dr 2) It's generally a no-go when it comes to opening your moon roof with a roof rack attached to your roof. Luckily this roof rack is fairly easy to install and remove so you'll likely want to...
view full answer... - Roof Rack Recommendation for 2018 Toyota Camry with Naked Roof and Class Moon RoofFor your 2018 Toyota Camry with a naked roof and the glass roof we have the Yakima Roof Rack part numbers # Y00425, # Y28TR, and # Y06192 which is a fit for your roof configuration and as long as you don't open the roof with the rack installed you'd be fine. Inno does not have a rack that fits your vehicle configuration.
view full answer... - Recommended Roof Rack for a 2023 Honda HR-VYakima, like all of the roof rack companies, sells their locks separately. To secure a Yakima roof rack to your vehicle you will want the Yakima Same Key System item # Y07204. The price is on the top right side of the product page. The great thing about Yakima's keys being sold separately is you can buy larger packs of keys 6 item # Y07206 or 8 item # Y07208 to secure other Yakima accessories to the roof rack and still only need one key. All of the components of your roof rack will come...
view full answer... - Recommended Roof Rack for a 2023 Acura MDX w/ Flush Side RailsTo add a set of Yakima Jetstream crossbars to the raised rails on the roof of your 2023 Acura MDX you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y49AR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204...
view full answer... - Roof Rack and Kayak Carrier for a 2017 Jeep CherokeeMany racks will be designed with overhang in mind for a variety of reasons. This can range from intending to have tie-down points for a load to maximizing carrying capacity. I also recommend that people use Aero shaped bars for kayak and watersport applications, as the width of the bars is helpful in controlling and mounting the load. For your roof rack, I recommend a Yakima JetStream kit, consisting of: - Yakima JetStream 50" Crossbars, part # Y00425 - Yakima BaseLine Towers, part...
view full answer... - What Crossbar System Do You Recommend For a Rooftop Tent on My 2021 Subaru Forester?For a crossbar system that will be able to accommodate a roof top tent on your 2021 Subaru Forester, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR - (optional for theft-deterrence) Yakima Same-Key Lock Cores # Y07204 With this Yakima crossbar systems, you will be able to accommodate a rooftop tent up to a maximum static weight capacity of 600 pounds. If the...
view full answer... - Best Roof Rack For 2021 Mazda CX-5 With Flush Side Rails For Rooftop TentHey Dillon, thanks for the nice words, they are definitely appreciated, and we can get your 2021 Mazda CX-5 with flush rails set up with a roof rack for a rooftop tent. Starting with your question about Thule, they discontinued that fit kit so I'm not quite sure why they still have it listed. So the best option for your CX-5 is 100 percent the Yakima. You mentioned Inno, and of course price is always a factor, but honestly I just would not use them on my roof for a rooftop tent. Carrying...
view full answer... - Roof Rack Recommended for 2013 BMW X3 With Bare RoofMost X3 models were equipped with the roof rails, so I initially thought you might be out of luck, but after searching around I found that Yakima offers a JetStream roof rack that would work perfectly on the bare roof of your 2013 BMW X3. To assemble the rack, you'll need the following parts: • 50 Inch JetStream crossbars in black as # Y00425 • BaseLine Tower Feet, part # Y28TR • Front Fit Clip # Y06123 • Rear Fit Clip # Y06127
view full answer... - Will the Yakima JetStream Roof Rack for a 2019 Mercedes-Benz GLC-300 Work With MoonroofThe Yakima JetStream Crossbar System part # Y00425, part # Y00145, and part # Y06022 which is a fit for a 2019 Mercedes-Benz GLC-300 will allow you to open the moonroof. The factory roof racks are very low profile so they sometimes don't allow you to open the moonroof. There can also be an issue with wrap-around style accessories. The Yakima JetStream Crossbar System is an excellent option because you will have full use of your moonroof, you won't have to worry about wrap-around style accessories,...
view full answer... - Does Yakima Roof Rack for 2017 Honda CR-V Have Speed RatingThe roof racks we offer for your 2017 Honda CR-V like the Yakima part numbers # Y00425, # Y53TR, and # Y00245 which give you an aero shaped bar do not have a max speed rating but as long as you are below or near the speed limit you are going to be fine. I'd imagine you'd have bigger issues at whatever speed is too much for this roof rack long before the rack itself would become an issue. I looked pictures of tarheel antennas and they are pretty big. I am not sure that a roof rack would...
view full answer... - Roof Rack and Rear Loading Kayak Carrier Recommendation for a 2021 Honda CR-VFor your application I recommend going with a Yakima setup, both for the roof rack and for the kayak carrier. To install a Yakima roof rack on your 2021 Honda CR-V you need the following: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) The Rhino-Rack Nautic 581 Rear Loading Kayak Carrier # RR581 will fit the channels of the Yakima system just fine and it's a good rear-loading kayak carrier, I just really like...
view full answer... - Recommended Roof Rack for 2016 Ford ExpeditionThe roof rack I recommend for your 2016 Ford Expedition is from Yakima because it will give your SUV a roof rack that is highly effective, quiet, and has a refined look. This roof rack is made up of: - Yakima JetStream Crossbars # Y00425 - TimberLine Towers for Yakima Crossbars # Y33TR The JetStream crossbars will look graceful atop your '16 Expedition due to the aerodynamic shape of the bars. The aero shape of these bars, along with their built-in WindRidges, is also what ensures that...
view full answer...
- Rhino Rack 3 Bar Roof Rack that Fits 2021 Lexus GX 460The components you'd need to complete a Rhino Rack roof rack on your 2021 Lexus GX 460 are part numbers # RRVA126B-3, # RRRCH6, and # RRRCP23-BK. This does not require removal of the factory roof rails.
view full answer... - Installation of Yakima Roof Rack on 2013 Nissan AltimaInstalling the Yakima JetStream roof rack on your 2013 4-door Nissan Altima does not require the weather to be a certain temperature and there should be no interference with your door putting the rack on. The accompanying photo shows how the clamps will look when installed properly and your door should shut completely. This rack is made up of: - Yakima JetStream Crossbars # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers #...
view full answer...
- Do Locks of Yakima Skyline Towers Lock Fit Kit to Vehicle As WellThe locks on the Skyline towers of the Yakima Jetstream roof rack that fits your 2022 Chevy Bolt EUV part numbers # Y00425, # Y53TR, and # Y00245 end up locking the bars to the feet, the feet to the landing pad and therefore the landing pad to the vehicle since you have to remove the feet before you can access the fit kit.
view full answer... - How to Carry a 98-LB Kayak on a 2012 GMC Yukon XL DenaliFor a 2012 GMC Yukon XL Denali, Yakima makes a great roof rack system. I recommend the HD bars, part # Y01156. They are heavy-duty bars capable of handling your kayak. To mount them to your tracks, you will need the SkyLine Towers, part # Y53TR, along with the HD Bar SL Adapter, part # Y03541, and the Landing Pad 20, part # Y00246. The total system can handle 165 pounds, but check your owner's manual to ensure your roof can handle that much. Since your kayak is so long, using the Malone...
view full answer... - Roof Rack for 2017 Ford Explorer Compatible With Thule Hullavator ProThere is a roof rack for your 2017 Ford Explorer that is compatible with the Thule Hullavator Pro Kayak Carrier and Lift Assist # TH898, although the 53 inch bars of the Rhino-Rack system are not going to be quite long enough to work. Due to that, in order to get long enough bars you will need to go with the Yakima roof rack. The reason is due to how crossbars mount; they foot pack that attaches to the bars slides into a channel underneath the crossbars. That channel on the Rhino-Rack...
view full answer...
- Roof Rack Needed for 2007 GMC Yukon Denali with Flush Rails and No Track on TopFrom what I could find it looks like you can use the Yakima Landing Pad 20 # Y00246 as a base for the roof rack system. I recommend checking out the linked instructions just to be on the safe side. After the Landing Pad 20 you'll need the SkyLine Towers # Y53TR and then I recommend going with the 60" JetStream Crossbars # Y00426 because they are the nicest that Yakima has to offer and they are the most versatile when it comes to mounting accessories to them.
view full answer... - Recommended Yakima Roof Rack to Fit 2016 GMC YukonThe best Yakima Roof Rack for your 2016 GMC Yukon consists of: 60 inch JetStream Crossbars # Y00426 (black) SkyLine Towers # Y53TR Landing Pad # Y00243 This is Yakima's quietest, most aerodynamic roof rack. It uses built-in WindRidges to contorl air flow over the bars to reduce wind noise and vibration. The bars are strong, durable, and will support up to 165 pounds. I've attached a video review for you to take a look at.
view full answer... - Which Rhino-Rack Pioneer Platform for 2018 Subaru Outback WagonThe Rhino Rack 58" x 47 " Pioneer Platform # RR42115BF is a confirmed fit per Rhino Rack for your 2018 Subaru Outback Wagon but I think you would have issues mounting this. We have not had the opportunity to test this out ourselves to confirm. With this being wider than the cross bars the outside mounting location is too wide for your crossbars. The center of the outside mounting location is 3-5/8" from the outside of the platform. You would not clear the side rails that your crossbars...
view full answer... - Roof Rack for 2023 Chevy Bolt EUV for 2 SurfboardsThe Yakima Corebar roof rack part numbers # Y00421, # Y53TR, # Y00245 would be a great roof rack for your 2023 Chevy Bolt EUV to carry two surf boards with a carrier like the Inno Board Locker Surfboard Carrier part # INA744 which can carry up to two boards.
view full answer... - Roof Rack for Leer Cap With Factory Tracks on 2015 Ram 1500You can absolutely get a roof rack for the factory tracks of the Leer cap on your 2015 Ram 1500. I have spoken about this exact issue with Yakima and they have told me the exact parts you need for a roof rack on your truck cap, which is the following: - Landing Pad 1 for Yakima Control Towers # Y00221 (Quantity of 2) - SkyLine Towers for Yakima Crossbars # Y53TR Crossbars (the correct length will depend on how wide the tracks are on your Leer cap, so just be sure to measure and then choose...
view full answer... - Low Profile Roof Rack and Cargo Box to Carry Skis on a 2018 Subaru Outback WagonI went out to our warehouse to measure a lot of the kits available to you. Since the sizing is standardized and your 2018 Subaru Outback Wagon has fixed mounting points, you can predict the size of the rack overall pretty easily. The lowest profile kit is the Yakima JetStream, standing at 4-1/2 inches tall. You will need the same mounting kit regardless of what length bar, which consists of: - Yakima SkyLine Towers, part # Y53TR - Yakima LandingPad 15, part # Y00241 What's nice is...
view full answer... - Recommended Platform Rack for 2019 Mercedes-Benz Metris Van With Naked RoofWe do have a way to add a large platform rack to your 2019 Mercedes-Benz Metris. What you will need to do is add a roof rack from Yakima, which you can then attach a Yakima Platform tray to. Here are all the parts you need, starting with the roof rack, and then the tray. Roof Rack - Yakima JetStream Crossbars # Y00426 (Black) - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 for Yakima SkyLine and Control Towers # Y00248 - Yakima Same Key System (SKS) Lock Cores # Y07204 Platform...
view full answer... - Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group PackageTo determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
view full answer...
- Can Thule Tandem Bike Rack be Used on Roof of 2020 Subaru Outback Wagon with OEM CrossbarsThe Thule Tandem Bike Rack part # TH558P requires an aftermarket roof rack so for your 2020 Subaru Outback Wagon with the current factory rack you'd also need the Yakima # Y00408, # Y53TR, # Y03536, # Y46VR to use the carrier.
view full answer... - Which Yakima Landing Pads for 2021 Toyota Highlander to Mount Skyline TowersTo use the Yakima Skyline Towers # Y53TR on your 2021 Toyota Highlander the correct landing pads are the Landing Pad 28 for Skyline and Control Towers # Y66VR.
view full answer... - Troubleshooting Yakima Roof Rack Installation on a 2021 Toyota HighlanderIf you are having issues getting the Landing Pad 28 # Y66VR and SkyLine Towers # Y53TR to fit correctly on your 2021 Toyota Highlander then the first thing to check is that you have the pads in the correct positions. You should have them turned in such a way that the extra material is facing to the front of the Highlander for the front pads and then the back of the Highlander for the rear pads (see attached). If you have done this correctly then try sending me some photos and I'll see...
view full answer...
- Roof Rack and Surfboard Carrier Recommendation for 2016 Jeep Grand CherokeeFirst you'll need a roof rack installed on your 2016 Jeep Grand Cherokee if your vehicle does not have one already from the factory. You need crossbars that run from left to right on the roof for a surf board rack to install. So you'll need to look at the rails on the roof of your vehicle that run front to back. If there is a chrome center section on the rail then you have the E Group style rails and you'd want the Yakima roof rack part numbers # Y00421, # Y53TR, and #Y00244 which is an...
view full answer... - Roof Rack Recommendation for 2009 Hummer H2For a 2009 Hummer H2 we have the Yakima Roof Rack part numbers # Y00409, # Y53TR, # Y03536, and # Y00224 which is a confirmed fit and will work well. We don't have anything for a 2011 model as there wasn't a 2011 model made in the US nor do we have anything that was made by Hummer.
view full answer... - 2008 Mercedez C300 Sedan Yakima Round Bar Roof Rack RecommendationFor your 2008 Mercedes C300 the Yakima Skyline roof rack components you need are # Y00408, # Y53TR, # Y03536, and # Y00233 which includes the Landing Pad 11.
view full answer... - Does Yakima Roof Rack for 2017 Honda CR-V Have Speed RatingThe roof racks we offer for your 2017 Honda CR-V like the Yakima part numbers # Y00425, # Y53TR, and # Y00245 which give you an aero shaped bar do not have a max speed rating but as long as you are below or near the speed limit you are going to be fine. I'd imagine you'd have bigger issues at whatever speed is too much for this roof rack long before the rack itself would become an issue. I looked pictures of tarheel antennas and they are pretty big. I am not sure that a roof rack would...
view full answer... - Roof Rack and Rear Loading Kayak Carrier Recommendation for a 2021 Honda CR-VFor your application I recommend going with a Yakima setup, both for the roof rack and for the kayak carrier. To install a Yakima roof rack on your 2021 Honda CR-V you need the following: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) The Rhino-Rack Nautic 581 Rear Loading Kayak Carrier # RR581 will fit the channels of the Yakima system just fine and it's a good rear-loading kayak carrier, I just really like...
view full answer... - Will I Be Able to Use the Thule Hullavator in the Channels of Rhino-Rack Vortex Aero Crossbars?To address your question - yes. The top channels in the Vortex Aero Crossbars in the # Y02-490B are the same dimensions as the Thule channels like in the Thule WingBar Evo Crossbars # TH711420. However, when it comes to finding the fit required for the Thule Hullavator # TH898 on a camper shell, it is a bit complicated. The reason why is because in order for the Hullavator to function in the "down" position, it requires at least 4 inches of crossbar clearance past the feet. In addition...
view full answer... - Yakima Round Bar Roof Rack for 2015 Jeep Grand Cherokee with E Group PackageIn order to install round Yakima crossbars like the 48" # Y00408 on your 2015 Jeep Grand Cherokee with the E Group Package you will need the SkyLine Towers # Y53TR, the RoundBar SL Adapter # Y03536, and the Landing Pad 18 # Y00244 (which is what will actually mount to the fixed point on those factory rails. This will provide you with a complete round bar roof rack system for your Jeep. I have attached an installation video that you can use for reference.
view full answer... - Yakima Round Bar Roof Rack that Fits 2017 Subaru OutbackYes, Yakima does offer a round bar roof rack that is a confirmed fit for your 2017 Subaru Outback Wagon with the factory roof rails. For that you'd need the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241, but since you have bars already you'd be able to do without the part # Y00408.
view full answer... - Roof Rack Needed for 2021 Jeep Grand Cherokee Limited For Thule HullavatorFor your 2021 Jeep Grand Cherokee that has the flush roof rails that have the chrome center section for a roof rack the Yakima 55 inch HD bar setup part # Y01156, # Y53TR, # Y03541, and # Y00244 would be a really great option with plenty of capacity and bar space for roof top cargo. Now you'd only be able to fit two of the Hullavators part # TH898 based on how much space they take up and how they fold down etc. This rack can easily detach for the Yakima bars as it would fit into the top...
view full answer... - Roof Rack for 2019 Cadillac XT5 PlatinumIn regards to vehicles that have a trailer hitch - which would be put on at the factory - some of them can be removed, but some are welded on, and there is unfortunately no way for us to know which vehicles have welded hitches. Additionally, there is not a fit for a trailer hitch fit for a 2019 Cadillac XT5 Platinum which would allow you to replace it. The roof rack is another story and that can be removed on a '19 XT5 Platinum. The roof rack on this vehicle (which I checked out and you...
view full answer...
- Which Rhino-Rack Pioneer Platform for 2018 Subaru Outback WagonThe Rhino Rack 58" x 47 " Pioneer Platform # RR42115BF is a confirmed fit per Rhino Rack for your 2018 Subaru Outback Wagon but I think you would have issues mounting this. We have not had the opportunity to test this out ourselves to confirm. With this being wider than the cross bars the outside mounting location is too wide for your crossbars. The center of the outside mounting location is 3-5/8" from the outside of the platform. You would not clear the side rails that your crossbars...
view full answer... - Low Profile Roof Rack and Cargo Box to Carry Skis on a 2018 Subaru Outback WagonI went out to our warehouse to measure a lot of the kits available to you. Since the sizing is standardized and your 2018 Subaru Outback Wagon has fixed mounting points, you can predict the size of the rack overall pretty easily. The lowest profile kit is the Yakima JetStream, standing at 4-1/2 inches tall. You will need the same mounting kit regardless of what length bar, which consists of: - Yakima SkyLine Towers, part # Y53TR - Yakima LandingPad 15, part # Y00241 What's nice is...
view full answer... - Yakima Round Bar Roof Rack that Fits 2017 Subaru OutbackYes, Yakima does offer a round bar roof rack that is a confirmed fit for your 2017 Subaru Outback Wagon with the factory roof rails. For that you'd need the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241, but since you have bars already you'd be able to do without the part # Y00408.
view full answer... - How to Fit the Whispbar WB-400 Kayak Carrier on a 2016 Subaru Outback WagonWe do have some solutions for you to use a J-Style carrier on your 2016 Subaru Outback Wagon, but if your current crossbars don't have a T-Slot then the (discontinued) Whispbar WB-400 J-Style kayak carrier isn't compatible with your current roof rack system. To use this system with your Outback Wagon you need to upgrade your OEM crossbars to Yakima JetStream or HD crossbars which do use the T-Slots. For a complete roof rack system you need the SkyLine Towers # Y53TR and the Landing Pad...
view full answer... - Yakima Landing Pads for 2017 Subaru Outback WagonThe Yakima Landing Pad 15, part # Y00241 is a confirmed fit for the 2017 Subaru Outback. According to Yakima, these will work with SkyLine towers and Control Towers. If it turns out your current towers don't fit the new landing pads, you'll need the following parts to use your existing round bars: - SkyLine Towers for Yakima Crossbars, part # Y53TR - Round Bar SL Adapter, part # Y03536 This will allow you to keep your current bars and install them on the landing pads if needed.
view full answer... - Can Yakima Round Crossbars Install on Roof of 2015 Subaru Outback Wagon with Factory RackYakima does have a way to install a set of their round crossbars like the part # Y00408 on the roof of your 2015 Subaru Outback Wagon with the parts # Y53TR, # Y03536, and # Y00241 and you'd be set.
view full answer... - Thule Hullavator Kayak Carrier Mounting RequirementsTo install Thule's load-assist Hullavator kayak carrier # TH898 on a vehicle's roof rack the ends of the bars must extend out past the roof rack feet by at least 4-inches. You can see this requirement illustrated in the linked diagram. The comparable Yakima ShowDown carrier # Y04081 also has a similar bar space requirement. If your roof rack is a Subaru factory type whose bars do not extend past the rack feet/rails then you can still use the Hullavator but you'll need to add a different...
view full answer...
- Yakima Roof Rack for 2019 Subaru Outback Wagon with Wider Crossbar Spread than Thule RackThule and Yakima roof rack components are not compatible with each other. You can't use Thule crossbars with the feet of a Yakima kit. The Yakima Skyline/Jetstream roof rack part numbers # Y00425, # Y53TR, and # Y00241 do have a wider spread at 29-1/2 inches though so this would be a great option for you. You'd also need the Yakima lock set too with part # Y07204.
view full answer... - Best Roof Rack For The Thule Hullavator On A 20118 Subaru Outback WagonIt all depends on what your 2018 Subaru Outback Wagon has on the roof. If you have a touring Outback with flush rails you will need the Thule WingBar Evo Crossbars - Aluminum - Black - 50" Long - # TH711320; The Evo Flush Rail Feet for Thule Crossbars - Flush Side Rails - # TH710601; and the Fit Kit for Thule Evo Flush Roof Rack Feet - # TH186047. These bars will have the T-Slot on top so you will be able to use the Thule Hullavator # TH898. If you do not have the touring Outback and...
view full answer... - Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof RackThe factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
view full answer...
- Best Way to Carry a 13' Sailboat with a 2017 Subaru Outback WagonI have a few different solutions for transporting your Laser sailboat with your 2017 Subaru Outback Wagon; the first is with the roof rack you mentioned, but in all honesty that makes me a bit nervous so I'm going to recommend a trailer option as well. Roof Rack Parts - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 15 # Y00241 - Lock Core Kit # Y07204 (optional) - BigCatch Kayak Roof Rack w/ Tie-Downs # Y04091 Trailer Parts - Draw-Tite Max-Frame Trailer...
view full answer...
- Recommended Roof Rack for 2015 Subaru Outback Compatible with Malone Kayak CarrierIf you have the flush mounted rails that run front to back on your 2015 Subaru Outback, then I recommend the following roof rack: Yakima CoreBar Crossbars - 50" Long # Y00421 SkyLine Towers # Y53TR Landing Pad 15 # Y00241 Lock Cores # Y07204 If you have the raised side rails, then I recommend the Rhino-Rack Vortex StealthBar Roof Rack # JA7975. Both of these options are rated for up to 165 lbs and will work well with the Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD. You...
view full answer... - What Crossbar System Do I Need to Mount a Thule Motion XT # TH629706 to MY 2019 Subaru Outback?For a compatible roof rack system that will work with Thule cargo boxes like the Thule Motion XT Rooftop Cargo Box - 16 cu ft - Black Glossy # TH629706 on your 2019 Subaru Outback Wagon with raised factory rails, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 # Y00428 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR Landing Pad 15 for Yakima SkyLine and Control Towers - Qty...
view full answer... - Will Older Thule Hullavator Work With Yakima JetStream Roof Rack on 2019 Subaru OutbackYour older Thule Hullavator 897XT will work with the Yakima JetStream crossbars for your 2019 Subaru Outback. The T-slot on the JetStream bars are 1" wide x 1/2" tall, which is actually slightly larger than the T-slot on the AeroBlade bars so you won't have any issues fitting the Hullavator into that T-slot. As for the length of the bars, I do recommend using the 60" Yakima JetStream Crossbars # Y00426 to ensure you have the needed space to use your Hullavator. The rest of the parts...
view full answer... - Best Option To Upgrade Roof Rack On 2018 Subaru OutbackThe best upgraded roof rack we can offer for a 2018 Subaru Outback Wagon would be from Yakima, the JetStream Crossbar System part # Y00425, part # Y53TR, and part # Y00241 in particular is what I recommend. This system would provide you with a 165 lb weight capacity which would be the limit for this vehicle. It would also provide you with longer crossbars as well as those that have channels which will make the roof rack much more versatile.
view full answer... - Yakima RoundBar Roof Rack to Fit 2017 Subaru Outback with Stowable CrossbarsThe parts you listed are correct to make up the Yakima RoundBar rack for the 2017 Subaru Outback models that use Subaru's stowable rack system like you have. Here's links to each part: 48 inch RoundBars # Y00408 SkyLine Towers # Y53TR RoundBar Adapter # Y03536 Landing Pad 15 # Y00241 Since it sounds like you may already have crossbars it's possible you don't need new ones. The 48 inch bars are the recommended length but if yours are longer you can use them on your new Outback. They'll...
view full answer... - How To Mount The Yakima HD Cross Bars On A 2018 Subaru Outback WagonTo add the Yakima HD cross bars to the existing roof rails on your 2018 Subaru Outback wagon. I don't suggest making holes in the roof rails. We cannot provide the information to install them in that manner. I recommend using the HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 Item # Y03541 the Landing Pad 15 for Yakima Control Towers - Qty 4 Item # Y00241 and the SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track...
view full answer... - How to Determine if Two Malone SeaWing Kayak Carriers Fit 2019 Subaru Outback Factory Roof RackYour kayaks will fit the Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD, but two of them will not fit your 2019 Subaru Outback's factory roof rack because the crossbars simply are not long enough for both the carriers and your 30" wide kayaks. So to use a kayak carrier you'll need an aftermarket roof rack, and the verified fit to replace the roof rack on your 2019 Outback is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00428...
view full answer... - Recommended Roof Rack And Canoe Carrier For 2015 Subaru Outback WagonIf you have a roof rack system on your Outback and is not the Sport model, the roof rack I recommend is the Yakima CoreBar roof rack. You would need to remove your roof rack and use the fixed mounting points on your roof. The 50-inch aero-style crossbars design helps reduce wind noise and drag and helps keep the roof rack quieter. For this roof rack you will need part # Y00421, part # Y53TR, and part # Y00241. For longer crossbars, you can take a look at part # Y00422 for 60-inch, and...
view full answer... - Yakima Roof Rack Parts Needed for a 2017 Subaru Outback WagonYes, the recommended Yakima Landing pad for the 2017 Subaru Outback is the Landing Pad 15 part # Y00241 that you referenced. For crossbars you would want the part # Y00408, for towers part # Y53TR and adapters part # Y03536. All of these components would complete a roof rack for your vehicle.
view full answer... - Parts Needed to Install Yakima Roof Rack on 2017 Subaru Outback WagonYes, the Landing Pad 15 # Y00241 is the correct Landing Pad for a 2017 Subaru Outback Wagon with flush mounted roof rails. For a round bar roof rack you would need these part numbers # Y00408, # Y53TR, # Y03536, and # Y00241. For an aero bar roof rack you would need the # Y00421, # Y53TR, and # Y00241. Aero bars provide better fuel mileage and less wind noise.
view full answer... - Will the V-Style Kayak Carrier MPG567 Fit on a 2015 Subaru Outback WagonYou are correct that the V-Style Kayak Carrier MPG567 (discontinued) is specifically designed for a Malone EcoLight Trailer like part # MAL43FR. Although it will not fit your 2015 Subaru Outback Wagon I do have a solution for you. Instead of the V-Style Kayak Carrier I recommend going with the Rhino-Rack Nautic Roof SUP or Kayak Carrier w/ Tie-Downs - Side Loading - Clamp On, Item # RR570. This is compatible with one kayak and it clamps onto round, square, oval, aero, or elliptical crossbars....
view full answer... - Best Roof Rack For My 2019 Subaru Outback WagonIf it were me, I would 100% go with Yakima. Both Thule and Yakima will be just as low profile as the other. I would get the Yakima Jetstream crossbars # Y00425. These are 50 inch crossbars in black but you can get longer bars in silver if you want. You'll then need the Skyline Towers # Y53TR and this landing pad set # Y00241. These will mount in your fixed mounting points on your 2019 Subaru Outback Wagon. I really like this system because it is SO simple to remove the crossbars and install...
view full answer... - Roof Rack and Cargo Box Recommendation for 2019 Subaru Outback WagonFor your 2019 Subaru Outback Wagon that has raised roof rails the roof rack I recommend is the Yakima Jetstream rack part # Y00425, # Y53TR, # Y00241 because of how easy the rack is to install and because the crossbars are aerodynamically shaped like you said you wanted which will give you a quieter ride overall. Then for a cargo box I recommend the Yakima SkyBox NX 16 # Y95AV that can carry up to 16 cubic feet of cargo, can open from either side, and uses very easy to install mounting...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.