Sway Control Bracket Recommendation for a Left Hand Sway Bar
Question:
Can you use this bracket D320 for a left hand sway bar? It looks like you could just flip it over for the left side.
asked by: John B
Expert Reply:
You can use the Curt Ball Mount with Sway Control Bracket, # D320, in the rise position to have the sway control bracket on the left side, but you will want to remember that doing this will raise the height of your trailer tongue by almost 3 inches. This can create additional sway issues even with a sway control bar installed.
Another option that you can look into is using a weld on sway control tab like part # 3442. This tab can be welded to the side of your current ball mount to provide a location for the sway control ball.
Products Referenced in This Question
Replacement Sway Control Tab for Weight Distribution System - Weld On
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Tab
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Continue Researching
- Shop: Trailer Hitch
- Shop: Brake Controller
- Shop: Trailer Wiring
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Transmission Cooler
- Shop: Suspension Enhancement
- Video: Fastway e2 Weight Distribution Installation - 2014 Ram 2500
- Q&A: Should I Have Constant 12 Volt Power On Brake Output Pin On 7-Way Connector
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Video: Installation of a Tekonsha P3 Brake Controller on a 2018 Nissan Pathfinder 90195
- Video: Reese Sway-Control Bracket Review
- Q&A: Recommended 12 Inch Tires for Pop-up Camper Rated for 70 mph Crusing Highway Speeds
- Q&A: Which is the Correct 7-Way Trailer Wiring Harness for a 2018 Nissan Pathfinder
- Q&A: Curt Left Hand Sway Control For Travel Trailer
- Q&A: Adding a Second Sway Control Arm to Pro Series Weight Distribution System
- Shop: Kenda ST205/75D14 Bias Trailer Tire - Load Range C
- Shop: Provider ST205/75R15 Radial Trailer Tire - Load Range D
- Q&A: Location of Brake Controller Adapter Port to Install Prodigy P3 on 2019 Nissan Pathfinder
- Q&A: Does the Tekonsha P3 Trailer Brake Controller Turn Off or Stay On All the Time
- Video: Choosing the Right Trailer Wiring
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: trailer brake controller
- Video: Choosing the Right Brake Controller
- Search Results: brake controller
- Article: Trailer Tire Sizing
on Trailer Hitch Ball Mount
