Recommended Roof Rack for 2022 Toyota RAV4 With Flush Mounted Rails

Question

Question:

I would like to add a roof rack to my 2022 RAV4. I have those flush rails on top of it right now. The most important thing to me is that the rack is quiet.

asked by: Heidi

0

Expert Reply:

For your 2022 Toyota RAV4 with flush mounted rails I recommend the Yakima JetStream roof rack system. For this roof rack you will need the # Y00425, # Y53TR, and # Y98FR. This roof rack features the JetStream crossbars which are extremely aerodynamic and quiet. These bars have a lightweight aluminum construction that is durable and rustproof. These versatile crossbars work with most universal-mount bike, water, snow, and cargo carriers.

The SkyLine Towers are compatible with the Yakima Same Key System as well. If you would like to add locks to keep your rack secure you will also need the # Y07204.

I have attached an installation video for your reference.

expert reply by: Robin H

0

Answer 1

We definitely have a compatible roof rack for you! Judging by your photos, you do have a bare roof on your 2022 Toyota RAV4 LE. For a great compatible roof rack for your vehicle, I recommend the following parts: - Rhino-Rack Vortex Aero Crossbars…

view full answer...

Answer 2

Without knowing which Thule setup you currently have on your 2019 Toyota RAV4 I won't be able to tell if you if a certain new setup will be shorter or not. What I can say with certainty is that the Yakima JetStream Crossbars #Y00428, with the…

view full answer...

Answer 3

The Thule Hullavator Pro, part #TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those…

view full answer...

Answer 4

I understand how it can be overwhelming at first, but that's why I'm here! I do like the Yakima Skyline Towers #Y53TR so definitely get those. The Skyline towers need to mount to what they call a Landing Pad. For your 2021 Toyota Rav4 you…

view full answer...

Answer 5

Most roof rack weight capacities are listed as dynamic capacities which means it's the weight you could put on the rack while on the road which will have bumps and valleys where the cargo weight would be exaggerated. The capacity you'd need…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...