Customers compare Y01162 to these similar products
Products Featured in this Video
Adam: Hi, everyone. Adam, with etrailer.com. Today, we're going to be taking a look at the Yakima Eyebolt. These are going to be able to work with a lot of different bars. We have the Yakima HD bars here. They're also going to be able to work with the JetStream bars.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Buyers Products Super Track Kit - 4 Clear Anodized Extruded Aluminum Rails With 8 Tie Rings, part #337ST93, has the following mounting hole measurements. From the end of the bracket to the closest hole, 9/16" (from both ends) From first…
view full answer...It might be possible to use the Long Bed Yakima SideBar Side Rails #Y01154 for the OverHaul Rack #Y01151-57 on your Ford F-150 Raptor with the short bed but it's going to depend on how much space you have between the uprights when…
view full answer...The manual switch for the Pace Edwards Bedlocker Retractable Hard Tonneau Cover #PE44CV can be found as part #311-BL-1120 on our site. This plugs into the harness at the canister and then you route and install the switch wherever it works best for…
view full answer...The Uprights #Y01151 included with the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-58 are 16-3/4" long and 5-1/2" wide. They are height adjustable from 19" to 30" above the truck bed rail.
view full answer...We have exactly what you are looking for. The Yakima A Anchor plates #Y8810074 you purchased are designed to work with the Yakima Landing Pad 1 #Y00221 which is not what is in the picture of the landing pads you purchased so you will need to…
view full answer...Yes Yakima roof racks can fit the Thule roof rack tracks. To do that you will need 4 of the Yakima Control Towers #Y8890027, 2 sets of the Yakima Landing Pad #Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use #Y00409, for 66 in…
view full answer...We have Thule TracRac SR ladder racks that fit your 2017 Ram 1500 but none that slide in a factory track system. You'd have to go with a system that includes base rails that the uprights slide in like the part #TH43003XT-501 which is what…
view full answer...From the top of the camper shell on your truck to the top of the TracRac CapRac part #TH29200XT will measure 10-1/4 inches. Since the bars are 1-5/8 tall that means the legs are 8-5/8 inches. There's no reason you couldn't cut the crossbars…
view full answer...The Yakima Replacement Anchor Plate Style-A, Part #Y8810074, comes as a set of 8 plates that measure 3/4-inch x 7/8-inch. The centered threaded hole measures 0.2 inches (or 5.1 millimeters) in diameter. Please refer to the photo provided. The Yakima…
view full answer...The Yakima SupDawg part #Y04075 that you referenced can fit the crossbars of the Yakima OverHaul part #Y01151 but it would do so by clamping around the bar. If you wanted carriers that install via the top channel of the bars I instead recommend the…
view full answer...The T-slot channel dimensions for the Yakima HD Crossbars #Y01158 are 11mm (7/16") wide on top, 8mm(5/16") deep, and 22mm(14/16") wide at it's bottom. I attached a picture of the HD crossbar's diagram as well as a video with…
view full answer...Yakima recommends 60 inch Jetstream crossbars part #Y00426 for your 2014 Volkswagen Tiguan with a naked roof as well as part numbers #Y28TR, #Y06117, and #Y06150 to complete the rack. I was able to find some pictures from Yakima that shows these bars…
view full answer...