Does etrailer Hitch for 2022 Honda CR-V Come with Install Hardware

Question

Question:

What size bolts, nuts their grade and please let me know what else will I need to attach the hitch to the 2022 Honda CRV non hybrid Thanks

asked by: Ray C

0

Expert Reply:

The etrailer hitch part # e98848 that fits your 2022 Honda CR-V comes with all needed install hardware so you would not need to source any bolts as it's all included. That said this hitches with 4 bolts that are 7/16-14 and one that is 1/2-13 and both are Grade 8.

expert reply by: Jameson C

0

Answer 1

Using Loctite when installing a trailer hitch is not required but it can certainly be used to create an even stronger bond. Blue Loctite like the Blue Stick #LT37643 is plenty sufficient for this application. As long as the hardware for your hitch is…

view full answer...

Answer 2

When installing a hitch like the etrailer #e98848, you may or may not need the sensor relocation kit; we've seen some customers that have reported that the hands-free lift gate still works but that it requires touching a very specific spot and…

view full answer...

Answer 3

When it comes to using The etrailer Hitch Mounted Spare Tire Carrier - 2 inch Hitch #e98ZR, I would use The Optronics LED Trailer License Plate Light w/ Bracket - 5 Diodes - Clear Lens #LPL56CB to help relocate your license plate so its not blocked…

view full answer...

Answer 4

Curt manufactures the #e98848 hitch for us. They don't list the hitch as a fit for the hybrid model, but we have successfully installed the hitch on a hybrid model and several of our customers have provided feedback that it's a confirmed fit.…

view full answer...

Answer 5

The 3 inch dimension that needs to be cut from the rear bumper to install the etrailer.com hitch part #E98848 that you referenced is measured from the edge of the fascia and matches the angle of it. So the square cut would measure 3 inches. If you…

view full answer...

Answer 6

While not ideal to so after installing Trailer Hitch Receiver, #e98848, you should be just fine.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

It is going well and I'd be happy to help you! For a 2024 Honda CR-V Hybrid Sport, I recommend the etrailer Hitch item #e98848 you were looking at. We have confirmed through our vendor and customer reviews that this hitch will fit the hybrid…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...