Optronics Trailer Lights - License Plate Lights - LPL56CB Review Video

Yes, it does. The Hollywood Racks LED Light Bar item #HLY54RR is wired for a 4-way but comes with an adapter that will plug into a 7-way like yours to power the lights.

The Trailer License Plate Holder with LED Light #328-003-71BE uses non-submersible lights. Although this would not work well on your boat trailer, I have a different solution. I recommend using the LED Trailer License Plate Light #LPL82CBB. This…

Yes, you can use the Hopkins LED Breakaway Switch, #HM20060, with your existing trailer battery as long as the battery is a 12 volt and can power the trailer brakes at or above DOT specifications. On the switch, the black wire will be connected to…

A simple license plate holder that will get the job done is the Yakima PlateMate #Y02713. This installs on the bike rack or bikes using some hook and loop straps in multiple places so you can get the license plate in the best position. Attached is…

For your application I recommend the Light Kit #20174 and 2 of the Mounting Bracket #BK70BB. These will mount under the horizontal bars for the Hollywood Racks Sport Rider SE #HLY84FR. When it comes to the license plate bracket I'm not quite…

For your bike rack, I recommend the Lets Go Aero LED Light Kit for GearCage4 and BigBoss Railed Cargo Carriers #H01540. This will easily work with your factory trailer connector. If you don't have the separate 4 way connection, then you can use…

Aluminum trailer frames or bodies can cause grounding issues so I suggest using a separate ground wire that runs from the rear of the trailer up to the main ground post in the junction box like #38656. You can join the ground wires for the individual…

The reason that 10 Gauge #10-1-1 or 12 Gauge #12-1-1 wire is recommended for 10" brake assemblies, like part #AKEBRK-35-SA, is because they pull more power than the lights on your trailer. I believe the green wire you are referring to carries…

The Thinline LED Clearance and Side Marker Light #AL91AB require certain mounting brackets and plugs that are either already installed on the trailer or are available separately. A Right Angle 2-Wire Pigtail #A46PB will work with the Grommet #A91GB…

The Optronics Grommet #A91GB that you referenced, which is designed to work with the Thinline LED #AL91RB that you were looking at, will install into a mounting hole on the trailer that is 2-7/8 inches across and 1-1/2 inches tall. If you do not have…

The Optronics Thinline Submersible Red LED Clearance and Side Marker Light #AL91RB installs using a base, part #A91BOB in black or part #A91OB in chrome finish. A 2-wire pigtail #A46PB will allow for electrical installation. The white wire on the…

I believe what you are asking is the depth of 2-Wire Pigtail #A46PB, and it is 0.6 inches, which is just 0.1 inches more than the depth of both mounting brackets you were referring to, #A91BOB as well as the self-grounding #A91BB. This means it would…